thesis chapter numbers

• University of Michigan Library
• Research Guides

Microsoft Word for Dissertations

• Chapter and Section Numbering
• Introduction, Template, & Resources
• Formatting for All Readers
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example
• Images, Charts, Other Objects
• Footnotes, Endnotes, & Citations
• Cross-References
• Appendix Figures & Tables
• Table of Contents
• List of Figures/Tables
• Page Numbers
• Landscape Pages
• Combining Chapter Files
• Commenting and Reviewing
• Tips & Tricks
• The Two-inch Top Margin
• Troubleshooting
• Finalizing Without Styles
• Preparing Your Final Document
• Take a break

Page Contents

Microsoft Word can automatically keep track of your chapter, section, and sub-section numbering for you. Using these numbering schemes will also allow your figure/diagram/table/equations to be automatically numbered, as well.

In this part of the Guide, you'll learn:

• How to set Word to automatically number your Chapters and Sections
• How to customize your number style ( Section 1.1 vs. Section 1.a or Section 01.01 )
• How to automatically number Appendices

Automatic Chapter and Subsection Numbering

Important Note: Not everyone needs this type of numbering; if your discipline doesn’t require it, skip this section!

Word can automatically number sections (Chapter 1, 1.1, 1.2, etc.) of your document and include the chapter number in the captions (Figure 1.2, 2.2, etc.).

• Make sure each of your chapter titles are in the Heading 1 style, and then click on one of your chapter titles.
• Click OK when you are finished.
• If you typed in the text “Chapter #”, and now it is duplicating your efforts, delete the text you typed and leave the automatically generated chapter number.
• To follow the automatically generated chapter number with the title of your chapter on a new line, click just before the text of your title, hold down the Shift key on the keyboard, and then press the Enter key.

Note: If you have any problems with word automatically adding outline numbering to parts of your front matter, simply delete it.  Your chapter numbers will reset to show the correct number of chapters.

Removing the section numbering from our template

• Place your cursor in the title of your Chapter 1 (which is styled with the Heading 1 style)

In some cases, you may find that Word has added "Chapter X" before some of your Heading 1 sections that aren't chapters (like Acknowledgements or Bibliography). All you need to do is go to each of those sections, place your cursor after "Chapter X", and press Backspace to delete it.

Customizing Your Numbers

You have a lot of control over numbering. for example.

• you can change the numbering scheme from  1.1, 1.2 , etc...  to   1.a, 1.b , etc...
• you can change Arabic numbers (Chapter 1) to Ordinal (Chapter One)
• you can put a colon or a tab after the numbers ("Chapter 1: ")

"The numbering scheme lives in the Heading 1"

It's easy to inadvertently create multiple numbering schemes in a document and not realize it.  So it's always best to start by placing your cursor in one of your chapter headings (Heading 1). That ensures that you're making changes to the active scheme.

• Use the Number style for this level: pulldown menu (A) to choose from various numeral or letter styles.
• Under "Click level to modify" (B), in this screenshot we've selected level 1 (the Chapter level) and added the word “Chapter” and a space afterwards to the "Enter formatting for number" (C) field. 
• Then you can modify the other levels (Level 2 would be for a section in a chapter and Level 3 for a sub-section, and of course Level 4 for a sub-sub-section). You can, for example, change the period in between the level and sub-level numbers to a dash or anything you want by making the change in the "Enter formatting for number" (C) field.
• In the "Follow number with:" field (D), you may also see that a tab follows the number. We suggest you change that to a space. 

Guidelines for Chapter Numbering in a Thesis: How to Structure and Order Your Research

Writing a thesis requires meticulous planning and organization. one crucial aspect of presenting your research in a coherent manner is chapter numbering. properly structuring and ordering your thesis chapters will not only enhance the readability of your work but also demonstrate your research skills. in this blog post, we will provide you with a comprehensive guide on how to effectively number your thesis chapters..

Why is Chapter Numbering Important in a Thesis?

Chapter numbering serves several purposes in a thesis:

• It facilitates easy navigation for readers and reviewers.
• It creates a logical flow and structure for your research.
• It allows readers to locate specific information or sections within your thesis quickly.
• It showcases your organizational skills and attention to detail.

General Guidelines for Numbering Thesis Chapters

Follow these guidelines to ensure clarity and consistency:

• Start with numbering from Chapter 1: Begin your chapter numbering with Chapter 1 instead of Chapter 0. This signifies the start of your thesis.
• Use Arabic numerals: Number your chapters using Arabic numerals (1, 2, 3, etc.) and avoid using Roman numerals (I, II, III) or alphabetical numbering.
• Avoid duplicate numbering: Ensure that each chapter has a unique number. Do not assign the same number to multiple chapters.
• Number your chapters in consecutive order: Follow a sequential order for chapter numbering. This helps readers understand the logical progression of your research.
• Consider using decimal numbering: If your research requires a more nuanced breakdown, you can use decimal numbering (e.g., Chapter 2.1, Chapter 2.2). However, use this approach sparingly and only when necessary to avoid excessive complexity.

Special Cases: Preliminary and Appendices Chapters

While most thesis chapters follow a conventional numbering structure, there are a few exceptions to consider:

• Preliminary chapters: The preliminary sections, such as the abstract, acknowledgments, and table of contents, should not be numbered. However, you can assign them lowercase Roman numerals (i, ii, iii, etc.) or use a separate style (e.g., Roman number format).
• Appendices: Appendices are additional sections that provide supplementary information but are not an integral part of the main thesis. You can choose to number appendices as A, B, C or use alphanumeric combinations (e.g., Appendix A, Appendix B.1).

Final Thoughts

Proper chapter numbering in your thesis is essential for maintaining clarity and ensuring a smooth reading experience for your audience. By following the guidelines provided in this blog post, you can structure and order your research effectively, leaving a positive impression on your readers and evaluators.

Remember, maintaining consistency and logical progression in your chapter numbering reinforces the professionalism and academic integrity of your thesis. So, take the time to plan and organize your chapters meticulously, and you will have a well-structured, cohesive thesis that effectively communicates your research findings.

How helpful was this article?

Formatting Theses & Dissertations using Word 2010: Numbering

• Footnotes and Endnotes
• Images, Charts, Other Objects
• Cross-References
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example
• Setting Margins
• Creating and Using Templates
• Combining Chapters
• Finalizing Without Styles
• Adding Page Numbers
• Landscape Pages
• Automatic Table of Contents and Lists
• Commenting and Reviewing
• Quick Links

Page Contents

Learn about making subsections and appendices easier to number

• Customizing Your Numbers (different numbers in different places on the page on different pages)

Automatic Chapter and Subsection Numbering

Outline numbering in appendices, customizing your numbering, add different page numbers or number formats to different sections.

Let's say you want to use different page numbers or number formats and styles in different parts of your document. You could use page numbers such as i, ii, iii… for the introduction and table of contents and 1, 2, 3… for everything after. The trick is to divide the document into sections and to make sure those sections aren’t linked. Then, set the page numbering for  each  of those sections by following these steps.

Notes:  

If you're using Word Online, you can add page breaks but not section breaks. If you have the Word desktop application, use the  Open in Word  command to open the document. When you’re done and you save the document, it will continue to be stored where you opened it in Word Online. If you don’t have Word, you can  try  or  buy  it in the latest version of Office now.

Click at the very beginning of the first page where you want to start, stop, or change page numbering.

Choose  Layout  (or  Page Layout ) >  Breaks  >  Next Page .

Tip:  You might find it helpful to see section breaks and other formatting marks as you type. On the  Home tab, in the  Paragraph  group, choose  Show/Hide  (¶) to turn on the display of formatting marks. Choose the button again to turn off the display.

On the page after the section break, double-click in the header (top of page) or footer (bottom of page) area where you want to display page numbers. This will open the  Design  tab under  Header & Footer Tools .

Click  Link to Previous  to deselect the button and disconnect your header or footer from the header or footer in the previous section.

Note:  If  Link to Previous  is dimmed, it means there is no section break between the page you're on and the previous page. Make sure you've successfully added a section break (see step 2) and that you've opened the header for the appropriate section.

In the  Header & Footer  group, click  Page Number , pick a location, and then choose a style in the gallery.

Note:  If your change only affects the first page of your section, make sure  Different First Page  is not selected. Double-click the header or footer area of the first page of the section, and look in the  Options group on the  Design  tab.

To choose a format or to control the starting number, in the  Header & Footer  group, choose  Page Number  >  Format Page Numbers  to open the  Page Number Format  dialog box.

Do either or both of the following:

Click  Number format  to select the format for the numbering, such as a, b, c or i, ii, iii.

Under  Page numbering , choose  Start at  and type a number that you want to start the section with.

Tips:  

If you just want to change or delete the first page number of a section, double-click to open the header or footer on that page, and in the  Options  group on the  Design  tab, click  Different First Page . Then delete or format the first page number as you like.

You also can change the appearance of the page numbers. On the  Home  tab, choose  Font , and change, for example, the font style and family, and font size and color.

When you’re done, choose the  Close Header and Footer , or double-click anywhere outside the header or footer area to close it.

Format Page Number in Word 2010 and 2007 .

To Format the page numbering for different sections, follow these steps.  

• Click between two parts of your document that you want to number differently.
• on the  Page Layout Tab , Click  Breaks .
• Click  Next Page ,  Even Page , or  Odd Page , and then click  OK .
• Click in the first section of your document.
• On the  Insert  Tab Click  Header  and then Click Ed it Header
• Click in the header or footer where you want the page number
• On the  Header & Footer Tools tab  Click  Page Number
• Click The option that puts the page number where you would like
• On the  Header & Footer Tolls tab  Click  Page Number
• Click  Format Page numbers
• In the  Number Format  box, click the format that you want for the numbers in this section.
• Do one of the following:
• If you want the page numbering for the first page in this section to start at a particular number other than the first number in the format series, click  Start at  under  Page numbering , and then enter the first number that you want to appear on the first page of the section.
• If you want the page numbering to continue from the previous section, click Continue from previous section.
• Click  OK
• On the  Header and Footer  tools tab, click  Next  in the Navigation Group
• Repeat steps 1 through 3 and 9 through 11 to change the page numbering for another section
• On the  Header and Footer  tools tab, click  Close

Important Note: Not everyone needs this type of numbering; if your discipline doesn’t require it, skip this section!

Word can automatically number sections (Chapter 1, 1.1, 1.2, etc.) of your document and include the chapter number in the captions (Figure 1.2, 2.2, etc.).

• Make sure each of your chapter titles are in the Heading 1 style, and then click on one of your chapter titles.
• Click OK when you are finished.
• If you typed in the text “Chapter #”, and now it is duplicating your efforts, delete the text you typed and leave the automatically generated chapter number.
• To follow the automatically generated chapter number with the title of your chapter on a new line, click just before the text of your title, hold down the Shift key on the keyboard, and then press the Enter key.

Note: If you have any problems with word automatically adding outline numbering to parts of your front matter, simply delete it.  Your chapter numbers will reset to show the correct number of chapters.

Start Numbering on Page 2

How do i start page numbers on the second page of my word 2010 document.

Word 2010, by default, starts page numbers on the first page of a document. If the first page is a cover page, or a title page, then the second page of the document should be page 1.

• Insert page numbers by clicking on the Insert tab and choosing Page Number in the Header & Footer tab. Then select the position of the numbering.
• Because the new page numbers will be selected, the Design tab for Header & Footer Tools will appear. Under Options , select Different First Page . ( This will start page numbering page 2, but the second page will be labeled "2". This isn't what we wanted. There is an extra step to making this page say "1". )
• While the Design tab for Header & Footer is still up, select Page Number in the Header & Footer group. Then choose Format Page Number .
• The resulting window is shown to the right. Change the radial button at the bottom to Start at and type in 0 . Then click ok .

Follow the instructions at this link for roman numerals .

This was taken from the Just Tips webpage from the website for Mission Critical Training in Denver.

Customizing Your Numbers

If you want to change anything about the numbers – for example, you are using the 1.1, 1.2, etc. style but would like the word “Chapter” to display automatically in front of the Heading 1 number, you want to change Arabic numbers to Ordinal, or you want to change the spacing after the numbers, you can.

Click one of your headings, then go back to the Home Ribbon, and in the Paragraph Group click the Multilevel List icon (see screen shot above) and select Define New Multilevel List….   Click the More>> button, then select the relevant list level.

• You can use the Number style for this level: pulldown menu to choose from a various styles, as seen in the screenshot (below the Enter formatting for number: box).
• In the screenshot, with the Level on the left set at 1, we added the word “Chapter”. Moving to the second level, you can change the period in between the level and sublevel to a dash or anything you want in the Number format box.

You may also restart number for captions in your appendices or other separate areas of your dissertation.  You will need to change your outline numbering settings before inserting your captions.

We are going to do a variant of the steps above, but instead of defining new levels for your list, you will be editing the first level from this point forward. This should work, but sometimes Word acts up, and even though you’ve followed all the steps, it doesn’t take. If that happens, set up an appointment with the KNC and we’ll help you out.

• Apply the Heading 1 style to the title of your Appendix.
• On the Home Ribbon, go to the Paragraph Group , click the Multilevel List icon and select Define New Multilevel List….   Make sure the whole dialog box is showing by clicking on the More>> button (if it says <<Less instead, you are all set).
• Under Enter formatting for new number :, replace “Chapter” with “Appendix.”
• Choose the appropriate style, (such as A,B,C,… ) from the Number style for this level: pulldown menu.
• Set the correct letter or number in the Start at: pulldown.
• In the Apply changes to: pulldown, choose This point forward .
• Click OK to close the dialog box.
• << Previous: Setting Margins
• Next: Creating and Using Templates >>
• Last Updated: Jul 18, 2024 11:16 AM
• URL: https://research.auctr.edu/dissertation

Graduate School

• Make a Gift

Organizing and Formatting Your Thesis and Dissertation

Learn about overall organization of your thesis or dissertation. Then, find details for formatting your preliminaries, text, and supplementaries.

Overall Organization

A typical thesis consists of three main parts – preliminaries, text, and supplementaries. Each part is to be organized as explained below and in the order indicated below:

1. Preliminaries:

• Title page (required)
• Copyright page (required)
• Abstract (required) only one abstract allowed
• Acknowledgments (optional) located in the Preliminary Section only
• Preface (optional)
• Autobiography (optional)
• Dedication (optional)
• Table of Contents (required)
• List of Tables (optional)
• List of Figures (optional)
• List of Plates (optional)
• List of Symbols (optional)
• List of Keywords (optional)
• Other Preliminaries (optional) such as Definition of Terms

3. Supplementaries:

• References or bibliography (optional)
• Appendices (optional)
• Glossary (optional)
• List of Abbreviations (optional)

Preliminaries

These are the general requirements for all preliminary pages.

• Preliminary pages are numbered with lower case Roman numerals.
• Page numbers are ½” from the bottom of the page and centered.
• The copyright page is included in the manuscript immediately after the title page and is not assigned a page number nor counted.
• The abstract page is numbered with the Roman numeral “ii”.
• The remaining preliminary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all preliminary pages must be centered in all capital letters 1” from the top of the page.
• Do not bold the headings of the preliminary pages.

A sample Thesis title page pdf is available here ,  and a sample of a Dissertation title page pdf is available here.

Refer to the sample page as you read through the format requirements for the title page.

• Do not use bold.
• Center all text except the advisor and committee information.

The heading “ Thesis ” or “ Dissertation ” is in all capital letters, centered one inch from the top of the page.

• Your title must be in all capital letters, double spaced and centered.
• Your title on the title page must match the title on your GS30 – Thesis/Dissertation Submission Form

Submitted by block

Divide this section exactly as shown on the sample page. One blank line must separate each line of text.

• Submitted by
• School of Advanced Materials Discovery 
• School of Biomedical Engineering
• Graduate Degree Program in Cell and Molecular Biology
• Graduate Degree Program in Ecology

If your department name begins with “School of”, list as:

• School of Education
• School of Music, Theatre and Dance
• School of Social Work

If you have questions about the correct name of your department or degree, consult your department. Areas of Study or specializations within a program are not listed on the Title Page.

Degree and Graduating Term block

• In partial fulfillment of the requirements
• For the Degree of
• Colorado State University
• Fort Collins, Colorado (do not abbreviate Colorado)

Committee block

• Master’s students will use the heading Master’s Committee:
• Doctoral students will use the heading Doctoral Committee:
• The Master’s Committee and Doctoral Committee headings begin at the left margin.
• One blank line separates the committee heading and the advisor section.
• One blank line separates the advisor and committee section.
• Advisor and committee member names are indented approximately half an inch from the left margin.
• Titles before or after the names of your advisor and your members are not permitted (Examples – Dr., Professor, Ph.D.).

Copyright Page

• A sample copyright page pdf is available here.
• A copyright page is required.
• A copyright page is included in the manuscript immediately after the title page.
• This page is not assigned a number nor counted.
• Center text vertically and horizontally.
• A sample abstract page pdf is available here – refer to the sample page as you read through the format requirements for the abstract.
• Only one abstract is permitted.
• The heading “ Abstract ” is in all capital letters, centered one inch from the top of the page.
• Three blank lines (single-spaced) must be between the “ Abstract ” heading and your title.
• Your title must be in all capital letters and centered.
• The title must match the title on your Title Page and the GS30 – Thesis/Dissertation Submission Form
• Three blank lines (single-spaced) must be between the title and your text.
• The text of your abstract must be double-spaced.
• The first page of the abstract is numbered with a small Roman numeral ii.

Table of Contents

• A sample Table of Contents page pdf is available.
• The heading “ Table of Contents ” is in all capital letters centered one inch from the top of the page.
• Three blank lines (single-spaced) follow the heading.
• List all parts of the document (except the title page) and the page numbers on which each part begins.
• The titles of all parts are worded exactly as they appear in the document.
• Titles and headings and the page numbers on which they begin are separated by a row of dot leaders.
• Major headings are aligned flush with the left margin.
• Page numbers are aligned flush with the right margin.

The text of a thesis features an introduction and several chapters, sections and subsections. Text may also include parenthetical references, footnotes, or references to the bibliography or endnotes.

Any references to journal publications, authors, contributions, etc. on your chapter pages or major heading pages should be listed as a footnote .

• The entire document is 8.5” x 11” (letter) size.
• Pages may be in landscape position for figures and tables that do not fit in “portrait” position.
• Choose one type style (font) and font size and use it throughout the text of your thesis. Examples: Times New Roman and Arial.
• Font sizes should be between 10 point and 12 point.
• Font color must be black. 
• Hyperlinked text must be in blue. If you hyperlink more than one line of text, such as the entire table of contents, leave the text black. 
• Margins are one inch on all sides (top, bottom, left, and right).
• Always continue the text to the bottom margin except at the end of a chapter.

• Please see preliminary page requirements .
• Body and references are numbered with Arabic numerals beginning with the first page of text (numbered 1).
• Page numbers must be centered ½” from the bottom of the page.

Major Headings

• A sample page pdf for major headings and subheadings is available here.
• Use consistent style for major headings.
• Three blank lines (single-spaced) need to be between the major heading and your text.
• Each chapter is started on a new page.
• The References or Bibliography heading is a major heading and the formatting needs to match chapter headings.

Subheadings

• A sample page pdf for major headings and subheadings is available here .
• Style for subheadings is optional but the style should be consistent throughout.
• Subheadings within a chapter (or section) do not begin on a new page unless the preceding page is filled. Continue the text to the bottom of the page unless at the end of a chapter.
• Subheadings at the bottom of a page require two lines of text following the heading and at least two lines of text on the next page.

Running Head

Do not insert a running head.

When dividing paragraphs, at least two lines of text should appear at the bottom of the page and at least two lines of text on the next page.

Hyphenation

The last word on a page may not be divided. No more than three lines in succession may end with hyphens. Divide words as indicated in a standard dictionary.

• The text of the thesis is double-spaced.
• Bibliography or list of reference entries and data within large tables may be single-spaced. Footnotes should be single spaced.
• Footnotes and bibliography or list of reference entries are separated by double-spacing.
• Quoted material of more than three lines is indented and single-spaced. Quoted material that is three lines or fewer may be single-spaced for emphasis.

Poems should be double-spaced with triple-spacing between stanzas. Stanzas may be centered if lines are short.

• Consult a style manual approved by your department for samples of footnotes.
• Footnotes are numbered consecutively throughout the entire thesis.
• Footnotes appear at the bottom of the page on which the reference is made.
• Footnotes are single-spaced.
• Consult a style manual approved by your department for samples of endnotes.
• Endnotes are numbered consecutively throughout the entire thesis.
• Endnotes may be placed at the end of each chapter or following the last page of text.
• The form for an endnote is the same as a footnote. Type the heading “endnote”.

Tables and Figures

• Tables and figures should follow immediately after first mentioned in the text or on the next page.
• If they are placed on the next page, continue the text to the bottom of the preceding page.
• Do not wrap text around tables or figures. Text can go above and/or below.
• If more clarity is provided by placing tables and figures at the end of chapters or at the end of the text, this format is also acceptable.
• Tables and Figures are placed before references.
• Any diagram, drawing, graph, chart, map, photograph, or other type of illustration is presented in the thesis as a figure.
• All tables and figures must conform to margin requirements.
• Images can be resized to fit within margins
• Table captions go above tables.
• Figure captions go below figures.
• Captions must be single spaced.

Landscape Tables and Figures

• Large tables or figures can be placed on the page landscape or broadside orientation.
• Landscape tables and figures should face the right margin (unbound side).
• The top margin must be the same as on a regular page.
• Page numbers for landscape or broadside tables or figures are placed on the 11” side.

Supplementaries

These are the general requirements for all supplementary pages.

• Supplementary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all supplementary pages are major headings and the formatting style needs to match chapter headings.

References or Bibliography

• The References or Bibliography heading is always a major heading and the formatting style needs to match chapter headings.
• References or Bibliography are ordered after each chapter, or at the end of the text.
• References or Bibliography must start on a new page from the chapter text.
• References are aligned flush with the left margin.
• The style for references should follow the format appropriate for the field of study.
• The style used must be consistent throughout the thesis.
• Appendices are optional and used for supplementary material.
• The Appendices heading is a major heading and the formatting style needs to match chapter headings.
• As an option the appendix may be introduced with a cover page bearing only the title centered vertically and horizontally on the page. The content of the appendix then begins on the second page with the standard one inch top margin.
• Quality and format should be consistent with requirements for other parts of the thesis including margins.
• Page numbers used in the appendix must continue from the main text.

A Foreign Language Thesis

Occasionally, theses are written in languages other than English. In such cases, an English translation of the title and abstract must be included in the document.

• Submit one title page in the non-English language (no page number printed).
• Submit one title page in English (no page number printed).
• Submit one abstract in the non-English language (page number is ii).
• Submit one abstract in English (page number is numbered consecutively from previous page – example: if the last page of the abstract in the foreign language is page ii the first page of the abstract in English is numbered page iii).

Multipart Thesis

In some departments, a student may do research on two or more generally related areas which would be difficult to combine into a single well-organized thesis. The solution is the multi-part thesis.

• Each part is considered a separate unit, with its own chapters, bibliography or list of references, and appendix (optional); or it may have a combined bibliography or list of references and appendix.
• A single abstract is required.
• The pages of a multi-part thesis are numbered consecutively throughout the entire thesis, not through each part (therefore, the first page of Part II is not page 1).
• The chapter numbering begins with Chapter 1 for each part, or the chapters may be numbered consecutively.
• Pagination is consecutive throughout all parts, including numbered separation sheets between parts.
• Each part may be preceded by a separation sheet listing the appropriate number and title.

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

• List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

• Non-Traditional Formats
• Font Type and Size
• Spacing and Indentation
• Tables, Figures, and Illustrations
• Formatting Previously Published Work
• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

• Dedication, Acknowledgements, and Preface (each optional)
• Table of Contents, with page numbers
• List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
• List of Abbreviations (if applicable)
• List of Symbols (if applicable)
• Introduction, if any
• Main body, with consistent subheadings as appropriate
• Appendices (if applicable)
• Endnotes (if applicable)
• References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

• The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
• Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

• When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
• List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
• If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
• The words “Chapel Hill” must be centered 1″ below the statement.
• One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
• Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
• No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

• Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
• One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
• One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
• Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
• Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
• Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

• Do not place a heading on the dedication page.
• The text of short dedications must be centered and begin 2″ from the top of the page.
• Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
• The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
• Subsequent pages of text return to the 1″ top margin.
• The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

• Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
• Include one double-spaced line between the heading and the first entry.
• The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
• If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
• Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
• Include one double-spaced line between each entry.
• Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
• The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

• Include the heading(s) in all capital letters, centered 1″ below the top of the page.
• Each entry must include a number, title, and page number.
• Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
• Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
• All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

• Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
• Arrange your abbreviations alphabetically.
• Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, single-space between the two lines.
• The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

Ohio State nav bar

• The Ohio State University
• BuckeyeLink
• Find People
• Search Ohio State

Formatting Guidelines For Theses, Dissertations, and DMA Documents

Guidelines for Formatting Theses, Dissertations, and DMA Documents is intended to help graduate students present the results of their research in the form of a scholarly document.

Before beginning to write a master’s thesis, PhD dissertation, or DMA document, students should read the relevant sections of the  Graduate School Handbook, section 7.8  for dissertations and/ or  section 6.4  for master’s theses.

Candidates for advanced degrees should also confer with their advisors and members of their graduate studies committees to learn about any special departmental requirements for preparing graduate degree documents.

Members of the graduation services staff at the Graduate School are available to provide information and to review document drafts at any stage of the planning or writing process. While graduation services is responsible for certifying that theses and/or dissertations have been prepared in accordance with Graduate School guidelines, the student bears the ultimate responsibility for meeting these requirements and resolving any related technical and/or software issues . Graduation services will not accept documents if required items are missing or extend deadlines because of miscommunication between the student and the advisor.

Accessibility Features

As of Spring, 2023, all theses and dissertations will need to incorporate the following accessibility features to align with the university’s accessibility policy.  When you submit your final document to OhioLINK you will be verifying that accessibility features have been applied.

• PDF file includes full text
• PDF accessibility permission flag is checked
• Text language of the PDF is specified
• PDF includes a title

Features and Other Notes

Some features are required, and some are optional. Each component is identified with a major heading unless otherwise noted. The major heading must be centered with a one-inch top margin. 

Sample Pages and Templates

Templates are available for use in formatting dissertations, theses, and DMA documents. Please read all instructions before beginning. 

• Graduate Dissertations and Theses Templates - OSU Login Required

FRONTISPIECE (OPTIONAL)

If used, no heading is included on this page.

TITLE PAGE (REQUIRED)

The title page should include:

• the use of title case is recommended
• dissertation, DMA. document, or thesis
• Presented in Partial Fulfillment of the Requirements for the Degree [insert the applicable degree such as Doctor of Philosophy, Doctor of Musical Arts, Master of Science, etc.] in the Graduate School of The Ohio State University
• Name of the candidate 
• Initials of previous earned degrees
• insert correct name from program directory
• Year of graduation
•  Dissertation, document, or thesis [select applicable title] committee and committee member names

COPYRIGHT PAGE (REQUIRED)

Notice of copyright is centered in the following format on the page immediately after the title page. This page is not identified with a page number.

Copyright by John James Doe 2017

ABSTRACT (REQUIRED)

The heading Abstract is centered without punctuation at least one inch from the top of the page. The actual abstract begins four spaces below the heading. See sample pages.

DEDICATION (OPTIONAL)

If used, the dedication must be brief and centered on the page.

ACKNOWLEDGMENTS

(OPTIONAL, BUT STRONGLY RECOMMENDED)

Either spelling of the word, acknowledgments or acknowledgments, is acceptable. The acknowledgment is a record of the author’s indebtedness and includes notice of permission to use previously copyrighted materials that appear extensively in the text. The heading Acknowledgments is centered without punctuation at least one inch from the top of the page.

VITA (REQUIRED)

Begin the page with the heading Vita, centered, without punctuation, and at least one inch from the top of the page. There are three sections to the vita: biographical information (required), publications (if applicable), and fields of study (required).

There is no subheading used for the biographical information section. In this section, include education and work related to the degree being received.

Use leader dots between the information and dates. The publication section follows. The subheading Publications should be centered and in title case. List only those items published in a book or journal. If there are none, omit the Publication subheading. The final section of the vita is Fields of Study, which is required. Center the subheading and use title case. Two lines below the Fields of Study subheading, place the following statement: Major Field: [insert only the name of your Graduate Program as it reads on the title page] flush left. Any specialization you would like to include is optional and is placed flush left on the lines below Major Field.

TABLE OF CONTENTS (REQUIRED)

The heading Table of Contents (title case preferred) appears without punctuation centered at least one inch from the top of the page. The listing of contents begins at the left margin four spaces below the heading. The titles of all parts, sections, chapter numbers, and chapters are listed and must

be worded exactly as they appear in the body of the document. The table of contents must include any appendices and their titles, if applicable. Use leader dots between the listed items and their page numbers.

LISTS OF ILLUSTRATIONS (REQUIRED IF APPLICABLE)

Lists of illustrations are required if the document contains illustrations. The headings List of Tables , List of Figures , or other appropriate illustration designations (title case preferred) appear centered without punctuation at least one inch from the top of the page. The listing begins at the left margin four spaces below the heading. Illustrations should be identified by the same numbers and captions in their respective lists as they have been assigned in the document itself. Use leader dots between the listed items and their page numbers. See sample pages .

BIBLIOGRAPHY/REFERENCES (REQUIRED)

Include a complete bibliography or reference section at the end of the document, before the appendix, even if you have included references at the end of each chapter. You may decide how this section should be titled. The terms References or Bibliography are the most commonly chosen titles. The heading must be centered and at least one inch from the top of the page.

Include this heading in the table of contents.

APPENDICES (REQUIRED IF APPLICABLE)

An appendix, or appendices, must be placed after the bibliography. The heading Appendix (title case preferred) centered at least one inch from the top of the page. Appendices are identified with letters and titles. For example: Appendix A: Data. Include all appendix headers and titles in the table of contents.

Other Notes

Candidates are free to select a style suitable to their discipline as long as it complies with the format and content guidelines given in this publication. Where a style manual conflicts with Graduate School guidelines, the Graduate School guidelines take precedence. Once chosen, the style must remain consistent throughout the document.

Top, bottom, left, and right page margins should all be set at one inch. (Keep in mind that the left margin is the binding edge, so if you want to have a bound copy produced for your personal use, it is recommended that the left margin be 1.5 inches.)

It is recommended that any pages with a major header, such as document title, chapter/major section titles, preliminary page divisions, abstract, appendices, and references at the end of the document be set with a 2-inch top margin for aesthetic purposes and to help the reader identify that a new major section is beginning.

The selected font should be 10 to 12 point and be readable. The font should be consistent throughout the document. Captions, endnotes, footnotes, and long quotations may be slightly smaller than text font, as long as the font is readable.

Double spacing is preferred, but 1.5 spacing (1.5 × the type size) is acceptable for long documents. Single spacing is recommended for bibliography entries, long quotations, long endnotes or footnotes, and long captions. Double spacing between each bibliography entry is recommended.

Each major division of the document, including appendices, must have a title. Titles must be centered and have at least a one inch top margin. The use of title case is recommended. If chapters are being used, they should be numbered and titled. For example: Chapter 1: Introduction. Appendices are identified with letters and titles. For example: Appendix A: Data.

PAGE NUMBERS

Every page must have a page number except the title page and the copyright page. If a frontispiece is included before the title page, it is neither counted nor numbered. The page numbers are centered at the bottom center of the page above the one inch margin. Note: You may need to set the footer margin to 1-inch and the body bottom margin to 1.3 or 1.5- inches to place the page number accurately.

Preliminary pages (abstract, dedication, acknowledgments, vita, table of contents, and the lists of illustrations, figures, etc.) are numbered with small Roman numerals (i, ii, iii, iv, etc.). Page numbering begins with the first page of the abstract, and this can be either page i or ii (The title page is technically page i, but the number is not shown on the page).

Arabic numerals are used for the remainder of the document, including the text and the reference material. These pages are numbered consecutively beginning with 1 and continue through the end of the document.

Notation practices differ widely among publications in the sciences, the humanities, and the social sciences. Candidates should confer with their advisors regarding accepted practice in their individual disciplines. That advice should be coupled with careful reference to appropriate general style manuals.

• Arabic numerals should be used to indicate a note in the text. 
• Notes may be numbered in one of two ways: either consecutively throughout the entire manuscript or consecutively within each chapter.
• Notes can be placed at the bottom of the page (footnotes) or at the end of a chapter or document (endnotes). Once chosen, the notation style must be consistent throughout the document.
• Notes about information within tables should be placed directly below the table to which they apply, not at the bottom of the page along with notes to the text.

ILLUSTRATIONS

Tables, figures, charts, graphs, photos, etc..

Some documents include several types of illustrations. In such cases, it is necessary that each type of illustration (table, figure, chart, etc.) be identified with a different numbering series (Table 1, Table 2, and so on, or Chart 1, Chart 2, and so on). For each series, include a list with captions and page numbers in the preliminary pages (for example, List of Tables, List of Charts, etc.). These lists must be identified with major headings that are centered and placed at the two-inch margin.

Each illustration must be identified with a caption that includes the type of illustration, the number, and a descriptive title (for example, Map 1: Ohio). Numbering may be sequential throughout the document (including the appendix, if applicable) or based on the decimal system (corresponding to the chapter number, such as Map 2.3: Columbus). When using decimal numbering in an appendix, the illustration is given a letter that corresponds with the appendix letter (for example, Figure A.1: Voter Data). Captions can be placed either above or below the illustration, but be consistent with the format throughout the document. If a landscape orientation of the illustration is used, make sure to also orient the illustration number and caption accordingly. The top of the illustration should be placed on the left (binding) edge of the page.

If an illustration is too large to ft on one page it is recommended that you identify the respective pages as being part of one illustration. Using a “continued” notation is one method. For example, the phrase continued is placed under the illustration on the bottom right hand side of the first page. On the following pages, include the illustration type, number, and the word continued at the top left margin; for example, Map 2: Continued. Whatever method you choose just make sure to be consistent. The caption for the illustration should be on the first page, but this does not need repeated on subsequent pages.

If an illustration is placed on a page with text, between the text and the top and/or bottom of the illustration, there must be three single spaced lines or two double spaced lines of blank space. The same spacing rule applies if there are multiple illustrations on the same page. The top/bottom of the illustration includes the caption.

All final Ph.D. dissertations, DMA. documents, and master’s theses are submitted to the Graduate School through OhioLINK at https://etdadmin. ohiolink.edu. The document must be saved in PDF embedded font format (PDF/A) before beginning the upload at OhioLINK. During the submission process, OhioLINK will require an abstract separate from your document. This abstract has a 500-word limit. You will get a confirmation from OhioLINK that the submission is complete. The submission then goes to the Graduate School for review. After it is reviewed by staff of the Graduate School, you will receive an email that it has been accepted or that changes need to be made. If changes are required, you will need to re-submit the revised document via an amended OhioLINK submission. You will receive an “accepted” email from the Graduate School once the document has been approved.

THESIS OR DISSERTATION IN A FOREIGN LANGUAGE

The Graduate School has no policy specifically permitting graduate degree documents to be written in a foreign language. The practice is allowed as long as it is approved by the student’s advisor and Graduate Studies Committee. Documents in a foreign language must comply with the following requirements:

• The title page must be in English, but the title itself may be in the same language as the document.
• If the title is in a language using other than Roman characters, it must be transliterated into Roman character equivalents.
• The abstract must be in English.
• The academic unit must notify the Graduate School of dissertations in a foreign language so that an appropriate graduate faculty representative can be found to participate in the final oral examination

Dissertation and Theses

The dissertation is the hallmark of the research expertise demonstrated by a doctoral student. It is a scholarly contribution to knowledge in the student’s area of specialization. 

A thesis is a hallmark of some master’s programs. It is a piece of original research, generally less comprehensive than a dissertation and is meant to show the student’s knowledge of an area of specialization.

Still Have Questions?

Dissertations & Theses 614-292-6031 [email protected]

Doctoral Exams, Master's Examination, Graduation Requirements 614-292-6031 [email protected]

/images/cornell/logo35pt_cornell_white.svg" alt="thesis chapter numbers"> Cornell University --> Graduate School

Required sections, guidelines, and suggestions.

Beyond those noted on the Formatting Requirements page , the Graduate School has no additional formatting requirements. The following suggestions are based on best practices and historic requirements for dissertations and theses but are not requirements for submission of the thesis or dissertation. The Graduate School recommends that each dissertation or thesis conform to the standards of leading academic journals in your field.

For both master’s and doctoral students, the same basic rules apply; however, differences exist in some limited areas, particularly in producing the abstract and filing the dissertation or thesis.

• Information in this guide that pertains specifically to doctoral candidates and dissertations is clearly marked with the term “ dissertation ” or “ doctoral candidates .”
• Information pertaining specifically to master’s candidates and theses is clearly marked with the term “ thesis ” or “ master’s candidates .”
• All other information pertains to both.

Examples of formatting suggestions for both the dissertation and thesis are available as downloadable templates .

Required? Yes.

Suggested numbering: Page included in overall document, but number not typed on page.

The following format for your title page is suggested, but not required.

• The title should be written using all capital letters, centered within the left and right margins, and spaced about 1.5 inches from the top of the page. (For an example, please see the template .)
• Carefully select words for the title of the dissertation or thesis to represent the subject content as accurately as possible. Words in the title are important access points to researchers who may use keyword searches to identify works in various subject areas.
• Use word substitutes for formulas, symbols, superscripts, Greek letters, etc.
• Below the title, at the vertical and horizontal center of the margins, place the following five lines (all centered):

Line 1: A Dissertation [or Thesis]

Line 2: Presented to the Faculty of the Graduate School

Line 3: of Cornell University

Line 4: in Partial Fulfillment of the Requirements for the Degree of

Line 5: Doctor of Philosophy [or other appropriate degree]

• Center the following three lines within the margins:

Line 2: Primary or Preferred Name [as registered with the University Registrar’s Office and displayed in Student Center]

Line 3: month and year of degree conferral [May, August, December; no comma between month and year]

Copyright Page

Suggested numbering: Page included in overall document, but number not typed on page

The following format for your copyright page is suggested, but not required.

• A notice of copyright should appear as the sole item on the page centered vertically and horizontally within the margins: © 20__ [Primary or Preferred Name [as registered with the University Registrar’s Office]. Please note that there is not usually a page heading on the copyright page.
• The copyright symbol is a lowercase “c,” which must be circled. (On Macs, the symbol is typed by pressing the “option” and “g” keys simultaneously. If the font does not have the © symbol, type the “c” and circle it by hand. On PCs, in the insert menu, choose “symbol,” and select the © symbol.)
• The date, which follows the copyright symbol, is the year of conferral of your degree.
• Your name follows the date.

Required?  Yes.

Suggested numbering: Page(s) not counted, not numbered

Abstract formats for the doctoral dissertation and master’s thesis differ greatly. The Graduate School recommends that you conform to the standards of leading academic journals in your field.

Doctoral candidates:

• TITLE OF DISSERTATION
• Student’s Primary or Preferred Name, Ph.D. [as registered with the University Registrar’s Office]
• Cornell University 20__ [year of conferral]
• Following the heading lines, begin the text of the abstract on the same page.
• The abstract states the problem, describes the methods and procedures used, and gives the main results or conclusions of the research.
• The abstract usually does not exceed 350 words in length (about one-and-one-half correctly spaced pages—but not more than two pages).

Master’s candidate:

• In a thesis, the page heading is simply the word “ABSTRACT” in all capital letters and centered within the margins at the top of the page. (The thesis abstract does not display the thesis title, author’s name, degree, university, or date of degree conferral.)
• The abstract should state the problem, describe the methods and procedures used, and give the main results or conclusions.
• The abstract usually does not exceed 600 words in length, which is approximately two-and-one-half to three pages of correctly spaced typing.
• In M.F.A. theses, an abstract is not required.

Biographical Sketch

Suggested numbering: iii (may be more than one page)

• Type number(s) on page(s).

The following content and format are suggested:

• The biographical sketch is written in third-person voice and contains your educational background. Sometimes additional biographical facts are included.
• As a page heading, use “BIOGRAPHICAL SKETCH” in all capital letters, centered on the page.
• Number this page as iii.

Required? Optional.

Suggested numbering: iv (may be more than one page)

The dedication page is not required and can contain whatever text that you would like to include. Text on this page does not need to be in English.

Acknowledgements

Suggested numbering: v (may be more than one page)

The following content and format are suggested, not required.

• The acknowledgements may be written in first-person voice. If your research has been funded by outside grants, you should check with the principal investigator of the grant regarding proper acknowledgement of the funding source. Most outside funding sources require some statement of acknowledgement of the support; some also require a disclaimer from responsibility for the results.
• As a page heading, use “ACKNOWLEDGEMENTS” in all capital letters, centered on the page.

Table of Contents

Suggested numbering: vi (may be more than one page)

The following are suggestions.

• As a page heading, use “TABLE OF CONTENTS” in all capital letters and centered on the page.
• List the sections/chapters of the body of the dissertation or thesis. Also, list preliminary sections starting with the biographical sketch. (Title page, copyright page, and abstract are not listed.)
• For theses and dissertations, the conventional format for page numbers is in a column to the right of each section/chapter title. The first page of each chapter/section is stated with a single number. Table of contents usually do not include a range of page numbers, such as 7-22.
• The table of contents is often single-spaced.

Two-Volume Theses or Dissertations

If the dissertation or thesis consists of two volumes, it is recommended, but not required, that you list “Volume II” as a section in the table of contents.

List of Figures, Illustrations, and Tables

Suggested numbering: vii (may be more than one page)

• If included, type number(s) on page(s).

As described in the formatting requirements above, figures and tables should be consecutively numbered. The Graduate School recommends that you conform to the styles set by the leading academic journals in your field. The items below are formatting suggestions based on best practices or historic precedents.

Table of contents format:

• As a page heading, use “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” in all capital letters, centered on the page.
• There should be separate pages for “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” even if there is only one example of each.
• The list should contain enough of the titles or descriptions so readers can locate items using the list. (It may not be necessary to include entire figure/illustration/table captions.)
• The list should contain the page number on which each figure, illustration, or table is found, as in a table of contents.
• The list of figures/illustrations/tables may be single-spaced.

Page format:

• Figures/illustrations/tables should be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or placed directly into the text. If a figure/illustration/table is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a figure/illustration/table appears on a page without other text, it should be centered vertically within the page margins. Figures/illustrations/tables should not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Figure/illustration/table numbering should be either continuous throughout the dissertation or thesis, or by chapter (e.g. 1.1, 1.2; 2.1, 2.2, etc.). The word “Figure,” “Illustration,” or “Table” must be spelled out (not abbreviated), and the first letter must be capitalized.
• A caption for a figure/illustration should be placed at the bottom of the figure/illustration. However, a caption for a table must be placed above the table.
• If the figure/illustration/table, not including the caption, takes up the entire page, the figure/illustration/table caption should be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Figures or List of Illustrations or List of Tables can list the page number containing the caption.)
• If the figure/illustration/table, not including the caption, takes up more than two pages, it should be preceded by a page consisting of the caption only. The first page of the figure/illustration/table must include the figure/illustration/table (no caption), and the second and subsequent pages must also include, at the top of the figure/illustration/table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If figures/illustrations/tables are too large, they may be reduced slightly so as to render a satisfactory product or they must either be split into several pages or be redone. If a figure/illustration/table is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25% beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced.
• While there are no specific rules for the typographic format of figure/illustration/table captions, a consistent format should be used throughout the dissertation or thesis.
• The caption of a figure/illustration/table should be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
• Horizontal figures/illustrations/tables should be positioned correctly—i.e., the top of the figure/illustration/table will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Figure/illustration/table headings/captions are placed with the same orientation as the figure/illustration/table when they are on the same page as the figure/illustration/table. When they are on a separate page, headings and captions are always placed in vertical orientation, regardless of the orientation of the figure/illustration/table. Page numbers are always placed as if the figure/illustration/table was vertical on the page.

Photographs should be treated as illustrations. To be considered archival, photographs must be black-and-white. (If actual color photographs are necessary, they should be accompanied by black-and-white photographs of the same subject.) Color photos obtained digitally do not need to be accompanied by a black-and-white photograph. Make a high-resolution digital version of each photograph and insert it into your electronic document, following the guideline suggestions for positioning and margins.

Optional Elements

List of abbreviations.

As a page heading, use “LIST OF ABBREVIATIONS” in all capital letters, centered on the page.

List of Symbols

As a page heading, use “LIST OF SYMBOLS” in all capital letters, centered on the page.

Suggested numbering: xi (may be more than one page)

As a page heading, use “PREFACE” in all capital letters, centered on the page.

Body of the Dissertation or Thesis: Text

Suggested numbering: Begin page number at 1

• Text (required)
• Appendix/Appendices (optional)
• Bibliography, References, or Works Cited (required)

Please note that smaller font size may be appropriate for footnotes or other material outside of the main text. The following suggestions are based on best practice or historic precedent, but are not required.

• Chapter headings may be included that conform to the standard of your academic field.
• Textual notes that provide supplementary information, opinions, explanations, or suggestions that are not part of the text must appear at the bottom of the page as footnotes. Lengthy footnotes may be continued on the next page. Placement of footnotes at the bottom of the page ensures they will appear as close as possible to the referenced passage.

Appendix (or Appendices)

An appendix (-ces) is not required for your thesis or dissertation. If you choose to include one, the following suggestions are based on best practice or historic precedent.

• As a page heading, use “APPENDIX” in all capital letters, centered on the page.
• Place in an appendix any material that is peripheral, but relevant, to the main text of the dissertation or thesis. Examples could include survey instruments, additional data, computer printouts, details of a procedure or analysis, a relevant paper that you wrote, etc.
• The appendix may include text that does not meet the general font and spacing requirements of the other sections of the dissertation or thesis.

Bibliography (or References or Works Cited)

A bibliography, references, or works cited is required for your thesis or dissertation. Please conform to the standards of leading academic journals in your field.

• As a page heading, use “BIBLIOGRAPHY” (or “REFERENCES” or “WORKS CITED”) in all capital letters, centered on the page. The bibliography should always begin on a new page.
• Bibliographies may be single-spaced within each entry but should include 24 points of space between entries.

Suggested numbering: Continue page numbering from body

If you choose to include a glossary, best practices and historic precedent suggest using a page heading, use “GLOSSARY” in all capital letters, centered on the page.

Suggested numbering: Continue page numbering from glossary

If you choose to include one, best practices and historic precedent suggest using a page heading, use “INDEX” in all capital letters, centered on the page.

Font Samples

Sample macintosh fonts.

• Palatino 12
• Garamond 14
• New Century School Book
• Helvetica 12 or Helvetica 14
• Times New Roman 12
• Times 14 (Times 12 is not acceptable)
• Symbol 12 is acceptable for symbols

Sample TeX and LaTeX Fonts

• CMR 12 font
• Any font that meets the above specifications

Sample PC Fonts

• Helvetica 12

In this section

• Graduate Program-Specific Contacts
• Doctoral Dissertation Policies and Procedures
• Master’s Thesis Policies and Procedures
• Thesis and Dissertation Release and Embargo Options

Thesis and Dissertation Formatting Guidelines & Deep Blue Archiving

• Graduate Studies Forms
• Three Minute Thesis Competition
• Graduate Student Appreciation Week

The purpose of these Formatting Guidelines is to make all dissertations and theses legible, accessible, preservable, and uniform in presentation. The steps you take now to format your dissertation and thesis will improve the file for future readers.

See The Mardigian Library’s  Formatting Your Thesis or Dissertation with Microsoft Word  for video tutorials designed to help you get most of the formatting of your thesis correct the first time. It is recommended that you use the dissertation/thesis template available in this guide which has most of the guidelines already incorporated.

For questions about formatting beyond what is covered in these resources, please check with your dissertation or thesis advisor.

File Format

• Submit the dissertation or thesis as a PDF file

Structure/Accessibility

Techniques for creating accessible documents, including adding alternative text for images, can be found on this  website.

Set Document Title:  Set the document title (note: this is a document property, not the filename) as your dissertation or thesis title.

Set Document Language

Set the Language of Parts (Quotations, Sections) That Are Different from the Main Language (required if applicable)

Use Correct Headings:  Use appropriate heading levels for section and subsection titles. Use “Heading 1” for main section titles (e.g. a Chapter), “Heading 2” for subsection titles (e.g. a Chapter section), and so on.

Create Lists, Columns, and Other Structures by Using the Appropriate Structural Element.  Do not use space bar, tab, or enter to arrange text in apparent tables, lists, or columns.

Images, Figures, Tables, Media

• Include descriptive alt text for all images and figures to convey the meaning and context of a visual item in a digital setting (do not use images of tables.)
• Use at least 2-inch top margin on the Title Page.
• Use 2-inch top margin on the first page of every chapter and major section (Acknowledgements, List of Figures, Bibliography, etc.…)
• Use at least 1-inch margins (top, bottom, left, right) on all pages. 

Text, Fonts, Color, Spacing

• Use a legible font, size 12 point, black color for all body text. Recommended fonts include Times or Times New Roman (serif fonts) or Arial (sans-serif font). Images and text within images may be in color.
• Headings may be visually different than body text (bigger, bold) and no bigger than size 16 point.
• Font size for footnotes, endnotes, captions, tables, figures, and equations may be smaller than the body text and no less than 9 point.
• Text in the Front Matter that links to a location within the dissertation or thesis (from the Table of Contents, for example) should not be underlined or outlined as hyperlinks.
• Use embedded fonts to ensure all font information in your document is secured in your PDF.
• Use either 1.5-line or double-line spacing throughout for all body text. 
• Use single-line spacing for text in tables, lists, footnotes/endnotes, figure/table legends/captions, and bibliographic entries (with a blank line between each citation or entry). 

Numbering and Page Numbering

• Number chapters consecutively and name them as follows: Chapter [#] [Title of Chapter]. For example, Chapter 1 Introduction. 
• Include the chapter number and name as a heading on the first page of chapter and in the Table of Contents.
• Number all tables, figures, appendices, etc. consecutively and name them as follows: Table [#] [Caption/Title/Legend]. 
• Tables, Figures, etc. may be numbered simply using whole numbers throughout the document (Figure 1, Figure 2, Figure 3) or by combining the chapter number and table, figure, etc. number per chapter (Figure 2.1, Figure 2.2, Figure 3.1). Choose one system from an appropriate style guide and use it consistently.
• Include a List of Figures, List of Tables, etc. in the front matter if the dissertation or thesis includes more than one figure, table, illustration, appendix, etc. (required if applicable)
• List of Figures (or List of Tables, List of Illustrations, List of Appendices, etc.) includes the title of each, its caption/title/legend, and page number on which it begins.
• Include page numbers in the front matter, centered in the footer, using lowercase Roman numerals, beginning on page ii (the first page after the Identifier/Copyright page).
• Include page numbers in the dissertation text and following sections, centered in the footer, using Arabic numerals, beginning on page 1.

Components of the Dissertation and Thesis

Include the following components, in the following order. All required components must be included.

Use the page numbering conventions given below. Every section below starts on a new page with 2-inch top margin.

Title Page (required)

No page number. No page count.

• See the section below for details of component requirements.

Frontispiece (Illustration or Epigraph) (optional)

Identifier/Copyright Page (required)

• No page number. Start page count here.
• See section below for details of component requirements.

Dedication (optional)

• Page numbers required. Start lowercase Roman numerals (starting with ii) here.
• Acknowledgments (optional)

Page numbers required. Lowercase Roman numerals.

Preface (optional)

Table of Contents (required)

List of Tables, List of Figures, etc. (required if applicable)

• List of Tables required if there is more than one table, etc.

List of Illustrations/Photos (required if applicable)

List of Appendices (required if applicable)

List of Abbreviations, List of Acronyms, List of Symbols (optional)

Abstract (required)

Dissertation or Thesis Text (required)

• Page numbers required. Start Arabic numerals here.
• Appendices (optional)

Bibliography or Reference section(s). (required)

Page numbers required. Arabic numerals. Insert at the end of each chapter, or the end of the dissertation/thesis, in the format preferred by the discipline.

Title Page Components

Include the following components on the title page, in the following order. Begin each item on a new line.

• At least 2 inch top margin on Title Page. 
• Complete dissertation  or master’s thesis title, centered, and capitalized in title case. 
• Your author name should match your legal name or preferred name in Wolverine Access
• You may use initial(s) for middle name(s).
• The following text, including line breaks, centered and single line-spaced. 

A dissertation (thesis) submitted in partial fulfillment of the requirements for the degree of Name of Degree (Name of Program) in The University of Michigan-Dearborn YEAR

• The text, “Doctoral Committee  or Master’s Thesis Committee:” left justified. 
• List chair or co-chairs first (in alphabetical order by surname if more than one) with “Chair” or “Co-Chair” after their titles and names.
• List other committee members in alphabetical order, by last name.
• Professor rank (e.g., Professor, Associate Professor, Assistant Professor, Emeritus Professor) or title (e.g., Dr.)
• Complete full name
• Affiliation, if not affiliated with University of Michigan (e.g., name of university, college, corporation, or organization)

Identifier/Copyright Page Components

Include the following components on the identifier/copyright page, in the following order. Begin each item on a new line, centered.

• Your full legal name (Required)
• Your @umich.edu email address (Required)
• Your ORCID iD (required only for PhD candidates)

ORCID iD is a unique digital identifier that you control and that distinguishes you from other researchers.

• ORCID iD profile URL (Recommended)
• Copyright notice. (Recommended)

Copyright notice notifies readers that you hold the copyright to this work and when it was established.

Use the following format: © Full Name YEAR

Final Formatting Checks

Before submission, double-check the following:

• All numbered series (pages, chapters, tables, figures, etc.) are consistently formatted and consecutive throughout the document.
• All entries in the table of contents and lists match contents as titled/ordered in the dissertation text.
• References/Bibliography entries are complete and match the formatting preference of your discipline.

Thesis or Dissertation Embargo

The thesis or dissertation is submitted as public evidence of your scholarly research and accomplishment. A thesis or dissertation and abstract is normally made publicly available upon degree conferral when it is deposited electronically in Deep Blue. If a student wishes to postpone public release of the final product, also called an embargo, the student should discuss this option with his or her faculty advisor. It has always been the university's expectation that every dissertation and abstract will be released upon conferral of the degree. Only in specific circumstances may release of a thesis or dissertation be deferred, and then only for a limited period of time. The student is responsible for requesting an embargo.

Embargo forms can be found at:  "Thesis and Dissertation Release and Embargo Options”

Deep Blue Archiving 

Required for doctoral dissertations and highly recommended for Master’s Thesis. The final pdf document of your dissertation or thesis must be submitted electronically to the Mardigian Library. This digital PDF will be the copy of record and will be archived in  Deep Blue . Deep Blue is a digital repository that is part of the University of Michigan Library. 

To submit your document, you need to provide:

• Your ORCID iD  
• Keywords that describe the subject, concepts, theories, and methods used in your document, to help others find and retrieve your document
• A copy of your thesis or dissertation in PDF format
• Optional – up to two supplementary files (no larger than 50 MB each), such as an audio file, spreadsheet, or a software program

To maintain the usability and appearance of your document, please review the  Best Practices for Producing High Quality PDF Files , available on Deep Blue.

If you have supplemental materials (such as data) that should also be made publicly available and associated with your dissertation or thesis, consider reaching out to  [email protected]  for help determining whether these should be deposited into one of the Deep Blue repositories.

Once your document is submitted to Deep Blue by the library, you will receive an email containing the DOI and a URL to access the document. It will also be added to the Mardigian Library catalog and made available on Google Scholar. If no embargo is requested, it may take three to four weeks for your document to become available.

Submit Final Thesis/Dissertation to Deep Blue

More support.

• Library Guide to  Formatting Your Thesis or Dissertation with Microsoft Word  and Video Tutorials.
• UM IT accessibility guide for  creating accessible documents .
• Guide for  embedding all fonts in PDFs generated with LaTeX or PDFLaTeX .

Contact your  subject librarian  for assistance on a wide range of topics including literature searching, citation management, and much more.

Download the Formatting Checklist

Office of graduate studies.

Atrium Institutional Repository

• Submitting Items to the Atrium
• Thesis & Dissertation Submission Guide
• Accessible Theses
• Linking ORCID to your Atrium Account

About these tutorials

Why is page numbering important, how do i add page numbers to my thesis, accessibility statement.

• PC Word Tutorials
• Mac Word Tutorials

Ask Us: Chat, email, visit or call

Get assistance

The library offers a range of helpful services.  All of our appointments are free of charge and confidential.

• Book an appointment

These tutorials were developed to provide step-by-step instructions to assist graduate students with using the built in tools in MS Word to create a thesis page numbering system that meets the Office of Graduate and Postdoctoral Studies’ (OGPS)  thesis page numbering  requirements.

The guide assumes you are starting with a MS Word document that does not have any page numbering applied. If you are working with a preformatted Word document such as the ETD monograph or manuscript templates , you can use these instructions to help you edit your page numbering to meet OGPS’ general page formatting requirements as required.

Please note that the word ‘thesis’ is used to refer to both a masters thesis and a doctoral dissertation. Additionally, this guide only focusses on one aspect of the thesis formatting requirements; please refer to the OGPS’ Thesis Completion guide for detailed information about formatting requirements.

Note: Graduate students commonly request support for thesis page numbering, however, neither the OGPS nor the library are able to provide one-on-one thesis formatting support.

The OGPS has general format requirements for theses to ensure a consistent and professional look to theses created at the U of G. The design and format of your thesis should reflect the hard work you, the graduate student, has put into writing it. 

When reviewing theses submitted for inclusion in the Atrium , the OGPS sees the following common page numbering errors made by students. These errors will result in the OGPS having to reject the thesis submission for correction and resubmission: 

• Using the incorrect page numbering system in the front, body and back matter of the thesis. 
• Forgetting to suppress the page number from displaying on the title page and abstract page(s). 

Your thesis must have: 

• All front matter (i.e., everything from the title page to the list of appendices) pages numbered using consecutive Roman numerals (e.g., iii, iv, v, etc.). 
• All body and back matter (e.g., research chapters, bibliography, appendices) pages numbered using consecutive Arabic numbers (e.g., 1, 2, 3, etc.) with the first page of the body text starting at page number “1”. 
• Page numbers located in the header or footer of the page. 

To do this, make use of the insert page number functionality in MS Word. This tool allows you to select a numbering system (i.e., Roman numerals) and the location on the page where the numbers will be displayed.

These tutorials have been created and tested with accessibility in mind and meets WCAG 2.2 AA compliance. To optimize the user experience, we do recommend that you access the interactive portions of the tutorial on larger resolution screens, such as a laptop or desktop monitor. Please  contact the library  if you encounter any barriers

These tutorials were created using Microsoft Office LTSC Professional Plus 2021, Word Version 2108. 

• PC Tutorial 1: Inserting Roman numeral page numbers
• PC Tutorial 2: Supressing page numbers on the title page and one-paged abstract
• PC Tutorial 3: Suppressing page numbers on a two-paged abstract
• PC Tutorial 4: Adding Arabic numeral page numbers

These tutorials were created using Microsoft Word for Mac (version 16.88).

• Mac Tutorial 1: Inserting Roman numeral page numbers
• Mac Tutorial 2: Supressing page numbers on a one-paged abstract
• Mac Tutorial 3: Suppressing page numbers on a two-paged abstract
• Mac Tutorial 4: Adding Arabic numeral page numbers
• << Previous: Linking ORCID to your Atrium Account
• Next: PC Word Tutorials >>
• Last Updated: Sep 13, 2024 11:41 AM
• URL: https://guides.lib.uoguelph.ca/atrium

Suggest an edit to this guide

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

How To Write The Results/Findings Chapter

For qualitative studies (dissertations & theses).

By: Jenna Crossley (PhD). Expert Reviewed By: Dr. Eunice Rautenbach | August 2021

So, you’ve collected and analysed your qualitative data, and it’s time to write up your results chapter. But where do you start? In this post, we’ll guide you through the qualitative results chapter (also called the findings chapter), step by step. 

Overview: Qualitative Results Chapter

• What (exactly) the qualitative results chapter is
• What to include in your results chapter
• How to write up your results chapter
• A few tips and tricks to help you along the way
• Free results chapter template

What exactly is the results chapter?

The results chapter in a dissertation or thesis (or any formal academic research piece) is where you objectively and neutrally present the findings of your qualitative analysis (or analyses if you used multiple qualitative analysis methods ). This chapter can sometimes be combined with the discussion chapter (where you interpret the data and discuss its meaning), depending on your university’s preference.  We’ll treat the two chapters as separate, as that’s the most common approach.

In contrast to a quantitative results chapter that presents numbers and statistics, a qualitative results chapter presents data primarily in the form of words . But this doesn’t mean that a qualitative study can’t have quantitative elements – you could, for example, present the number of times a theme or topic pops up in your data, depending on the analysis method(s) you adopt.

Adding a quantitative element to your study can add some rigour, which strengthens your results by providing more evidence for your claims. This is particularly common when using qualitative content analysis. Keep in mind though that qualitative research aims to achieve depth, richness and identify nuances , so don’t get tunnel vision by focusing on the numbers. They’re just cream on top in a qualitative analysis.

So, to recap, the results chapter is where you objectively present the findings of your analysis, without interpreting them (you’ll save that for the discussion chapter). With that out the way, let’s take a look at what you should include in your results chapter.

What should you include in the results chapter?

As we’ve mentioned, your qualitative results chapter should purely present and describe your results , not interpret them in relation to the existing literature or your research questions . Any speculations or discussion about the implications of your findings should be reserved for your discussion chapter.

In your results chapter, you’ll want to talk about your analysis findings and whether or not they support your hypotheses (if you have any). Naturally, the exact contents of your results chapter will depend on which qualitative analysis method (or methods) you use. For example, if you were to use thematic analysis, you’d detail the themes identified in your analysis, using extracts from the transcripts or text to support your claims.

While you do need to present your analysis findings in some detail, you should avoid dumping large amounts of raw data in this chapter. Instead, focus on presenting the key findings and using a handful of select quotes or text extracts to support each finding . The reams of data and analysis can be relegated to your appendices.

While it’s tempting to include every last detail you found in your qualitative analysis, it is important to make sure that you report only that which is relevant to your research aims, objectives and research questions .  Always keep these three components, as well as your hypotheses (if you have any) front of mind when writing the chapter and use them as a filter to decide what’s relevant and what’s not.

Need a helping hand?

How do I write the results chapter?

Now that we’ve covered the basics, it’s time to look at how to structure your chapter. Broadly speaking, the results chapter needs to contain three core components – the introduction, the body and the concluding summary. Let’s take a look at each of these.

Section 1: Introduction

The first step is to craft a brief introduction to the chapter. This intro is vital as it provides some context for your findings. In your introduction, you should begin by reiterating your problem statement and research questions and highlight the purpose of your research . Make sure that you spell this out for the reader so that the rest of your chapter is well contextualised.

The next step is to briefly outline the structure of your results chapter. In other words, explain what’s included in the chapter and what the reader can expect. In the results chapter, you want to tell a story that is coherent, flows logically, and is easy to follow , so make sure that you plan your structure out well and convey that structure (at a high level), so that your reader is well oriented.

The introduction section shouldn’t be lengthy. Two or three short paragraphs should be more than adequate. It is merely an introduction and overview, not a summary of the chapter.

Pro Tip – To help you structure your chapter, it can be useful to set up an initial draft with (sub)section headings so that you’re able to easily (re)arrange parts of your chapter. This will also help your reader to follow your results and give your chapter some coherence.  Be sure to use level-based heading styles (e.g. Heading 1, 2, 3 styles) to help the reader differentiate between levels visually. You can find these options in Word (example below).

Section 2: Body

Before we get started on what to include in the body of your chapter, it’s vital to remember that a results section should be completely objective and descriptive, not interpretive . So, be careful not to use words such as, “suggests” or “implies”, as these usually accompany some form of interpretation – that’s reserved for your discussion chapter.

The structure of your body section is very important , so make sure that you plan it out well. When planning out your qualitative results chapter, create sections and subsections so that you can maintain the flow of the story you’re trying to tell. Be sure to systematically and consistently describe each portion of results. Try to adopt a standardised structure for each portion so that you achieve a high level of consistency throughout the chapter.

For qualitative studies, results chapters tend to be structured according to themes , which makes it easier for readers to follow. However, keep in mind that not all results chapters have to be structured in this manner. For example, if you’re conducting a longitudinal study, you may want to structure your chapter chronologically. Similarly, you might structure this chapter based on your theoretical framework . The exact structure of your chapter will depend on the nature of your study , especially your research questions.

As you work through the body of your chapter, make sure that you use quotes to substantiate every one of your claims . You can present these quotes in italics to differentiate them from your own words. A general rule of thumb is to use at least two pieces of evidence per claim, and these should be linked directly to your data. Also, remember that you need to include all relevant results , not just the ones that support your assumptions or initial leanings.

In addition to including quotes, you can also link your claims to the data by using appendices , which you should reference throughout your text. When you reference, make sure that you include both the name/number of the appendix , as well as the line(s) from which you drew your data.

As referencing styles can vary greatly, be sure to look up the appendix referencing conventions of your university’s prescribed style (e.g. APA , Harvard, etc) and keep this consistent throughout your chapter.

Section 3: Concluding summary

The concluding summary is very important because it summarises your key findings and lays the foundation for the discussion chapter . Keep in mind that some readers may skip directly to this section (from the introduction section), so make sure that it can be read and understood well in isolation.

In this section, you need to remind the reader of the key findings. That is, the results that directly relate to your research questions and that you will build upon in your discussion chapter. Remember, your reader has digested a lot of information in this chapter, so you need to use this section to remind them of the most important takeaways.

Importantly, the concluding summary should not present any new information and should only describe what you’ve already presented in your chapter. Keep it concise – you’re not summarising the whole chapter, just the essentials.

Tips for writing an A-grade results chapter

Now that you’ve got a clear picture of what the qualitative results chapter is all about, here are some quick tips and reminders to help you craft a high-quality chapter:

• Your results chapter should be written in the past tense . You’ve done the work already, so you want to tell the reader what you found , not what you are currently finding .
• Make sure that you review your work multiple times and check that every claim is adequately backed up by evidence . Aim for at least two examples per claim, and make use of an appendix to reference these.
• When writing up your results, make sure that you stick to only what is relevant . Don’t waste time on data that are not relevant to your research objectives and research questions.
• Use headings and subheadings to create an intuitive, easy to follow piece of writing. Make use of Microsoft Word’s “heading styles” and be sure to use them consistently.
• When referring to numerical data, tables and figures can provide a useful visual aid. When using these, make sure that they can be read and understood independent of your body text (i.e. that they can stand-alone). To this end, use clear, concise labels for each of your tables or figures and make use of colours to code indicate differences or hierarchy.
• Similarly, when you’re writing up your chapter, it can be useful to highlight topics and themes in different colours . This can help you to differentiate between your data if you get a bit overwhelmed and will also help you to ensure that your results flow logically and coherently.

If you have any questions, leave a comment below and we’ll do our best to help. If you’d like 1-on-1 help with your results chapter (or any chapter of your dissertation or thesis), check out our private dissertation coaching service here or book a free initial consultation to discuss how we can help you.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

23 Comments

This was extremely helpful. Thanks a lot guys

Hi, thanks for the great research support platform created by the gradcoach team!

I wanted to ask- While “suggests” or “implies” are interpretive terms, what terms could we use for the results chapter? Could you share some examples of descriptive terms?

I think that instead of saying, ‘The data suggested, or The data implied,’ you can say, ‘The Data showed or revealed, or illustrated or outlined’…If interview data, you may say Jane Doe illuminated or elaborated, or Jane Doe described… or Jane Doe expressed or stated.

I found this article very useful. Thank you very much for the outstanding work you are doing.

What if i have 3 different interviewees answering the same interview questions? Should i then present the results in form of the table with the division on the 3 perspectives or rather give a results in form of the text and highlight who said what?

I think this tabular representation of results is a great idea. I am doing it too along with the text. Thanks

That was helpful was struggling to separate the discussion from the findings

this was very useful, Thank you.

Very helpful, I am confident to write my results chapter now.

It is so helpful! It is a good job. Thank you very much!

Very useful, well explained. Many thanks.

Hello, I appreciate the way you provided a supportive comments about qualitative results presenting tips

I loved this! It explains everything needed, and it has helped me better organize my thoughts. What words should I not use while writing my results section, other than subjective ones.

Thanks a lot, it is really helpful

Thank you so much dear, i really appropriate your nice explanations about this.

Thank you so much for this! I was wondering if anyone could help with how to prproperly integrate quotations (Excerpts) from interviews in the finding chapter in a qualitative research. Please GradCoach, address this issue and provide examples.

what if I’m not doing any interviews myself and all the information is coming from case studies that have already done the research.

Very helpful thank you.

This was very helpful as I was wondering how to structure this part of my dissertation, to include the quotes… Thanks for this explanation

This is very helpful, thanks! I am required to write up my results chapters with the discussion in each of them – any tips and tricks for this strategy?

For qualitative studies, can the findings be structured according to the Research questions? Thank you.

Do I need to include literature/references in my findings chapter?

This was very helpful

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Free Online Quiz for Class 9 Maths Chapter 1 Real Number

Table of Contents

Welcome to our Free Online Quiz for Class 9 Maths, where we focus on Chapter 1: Real Numbers ! This chapter is a key part of the CBSE Class 9 Maths Syllabus and helps you understand important ideas in math.

Fill Out the Form for Expert Academic Guidance!

Please indicate your interest Live Classes Books Test Series Self Learning

Verify OTP Code (required)

I agree to the terms and conditions and privacy policy .

Fill complete details

Target Exam ---

In this chapter, you will learn about different types of numbers, such as rational numbers, irrational numbers, integers, and whole numbers. Knowing these concepts is very important because they are used in many math problems and real-life situations.

To help you get ready, we provide helpful resources like NCERT Solutions for Class 9 Maths and worksheets for Class 9 Maths . These tools give you extra practice and help clear up any questions you might have. The quiz includes important questions for Class 9 Maths , so you can test what you know and prepare for the real numbers Class 9 test .

Class 9 Maths Chapter 2 Real Number Quiz with Answer

This free online quiz is a perfect tool for students to practice and revise Chapter 1: Real Numbers from the CBSE Class 9 Maths Syllabus . It covers key concepts such as rational and irrational numbers , providing a great way to test your understanding. The quiz complements the exercises in the NCERT Solutions for Class 9 Maths and can be used alongside worksheets for Class 9 Maths . It’s a fun and engaging way to sharpen your math skills and prepare for exams effectively.

Overview of Class 9 Chapter 1 Real Number

The Real Numbers chapter in Class 9 explains different kinds of numbers like natural, whole, integers, rational, and irrational numbers. It introduces important ideas like Euclid’s Division Lemma , the Fundamental Theorem of Arithmetic , and how real numbers can be written as decimals. Learning the properties of rational and irrational numbers and knowing where they are placed on the number line is important for solving math problems effectively.

• Introduction to number systems : Learn about different kinds of numbers like whole numbers, integers, and fractions.
• Real numbers and their decimal expansion : Real numbers can be written as decimals, which might end or go on forever.
• Representation of real numbers on a number line : You can show where real numbers fall on a number line.
• Operations on real numbers : Basic math like adding, subtracting, multiplying, and dividing real numbers.
• Laws of exponents for real numbers : Rules for working with powers of numbers.
• Difference between rational and irrational numbers : Rational numbers are fractions, while irrational numbers can’t be written as simple fractions.

Quiz on Real Number Class 9 Maths

To remember the concepts learned in this chapter, here are 5 quiz for class 9 Maths chapter 1 Real Number with their answers:

This quiz introduces the basic concepts of real numbers, including natural and whole numbers. It helps you test your understanding of number systems and lays the groundwork for further learning.

Real Number Quiz 1

In this quiz, you’ll practice identifying rational and irrational numbers. It focuses on the difference between these types of numbers and their properties.

Real Number Quiz 2

This quiz covers topics like the decimal expansion of real numbers and their representation on a number line.

Real Number Quiz 3

Quiz 4 focuses on operations with real numbers, helping you apply arithmetic operations like addition, subtraction, and multiplication.

Real Numbers Quiz 4

The final quiz tests your knowledge of exponents and the laws governing them for real numbers, enhancing your problem-solving skills.

Real Number Quiz 5

Important Topics of Class 9 Maths Chapter 1 – Real Numbers:

• Introduction to Number System : This explains different types of numbers, including natural, whole, integers, rational, and irrational numbers.
• Irrational Numbers : These are numbers that cannot be written as fractions, like √2 and π.
• Real Numbers and Their Decimal Expansion : Real numbers can have either terminating or non-terminating, repeating decimal expansions.
• Representation of Real Numbers on a Number Line : Shows how to place real numbers on the number line.
• Operations on Real Numbers : Covers basic arithmetic operations like addition, subtraction, multiplication, and division with real numbers.
• Laws of Exponents for Real Numbers : Discusses the rules for simplifying expressions involving exponents.

Real Number Quiz FAQs

What topics are covered in the real number quiz.

The quiz covers natural, whole, integers, rational, and irrational numbers, along with operations on real numbers and laws of exponents.

How long is the Real Number Quiz?

The quiz duration depends on the platform, but typically, it takes around 10-15 minutes.

Is there any negative marking in the Real Number Quiz?

No, most Real Number Quizzes don’t include negative marking.

How can I prepare for the Real Number Quiz?

Use NCERT Solutions and practice with worksheets to review key concepts.

Is the Real Number Quiz suitable for Class 9 students?

Yes, it aligns with the Class 9 Maths syllabus.

Related content

Get access to free Mock Test and Master Class

Register to Get Free Mock Test and Study Material

Offer Ends in 5:00

Select your Course

Please select class.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation

How to Write a Thesis or Dissertation Conclusion

Published on September 6, 2022 by Tegan George and Shona McCombes. Revised on November 20, 2023.

The conclusion is the very last part of your thesis or dissertation . It should be concise and engaging, leaving your reader with a clear understanding of your main findings, as well as the answer to your research question .

In it, you should:

• Clearly state the answer to your main research question
• Summarize and reflect on your research process
• Make recommendations for future work on your thesis or dissertation topic
• Show what new knowledge you have contributed to your field
• Wrap up your thesis or dissertation

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Discussion vs. conclusion, how long should your conclusion be, step 1: answer your research question, step 2: summarize and reflect on your research, step 3: make future recommendations, step 4: emphasize your contributions to your field, step 5: wrap up your thesis or dissertation, full conclusion example, conclusion checklist, other interesting articles, frequently asked questions about conclusion sections.

While your conclusion contains similar elements to your discussion section , they are not the same thing.

Your conclusion should be shorter and more general than your discussion. Instead of repeating literature from your literature review , discussing specific research results , or interpreting your data in detail, concentrate on making broad statements that sum up the most important insights of your research.

As a rule of thumb, your conclusion should not introduce new data, interpretations, or arguments.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

Depending on whether you are writing a thesis or dissertation, your length will vary. Generally, a conclusion should make up around 5–7% of your overall word count.

An empirical scientific study will often have a short conclusion, concisely stating the main findings and recommendations for future research. A humanities dissertation topic or systematic review , on the other hand, might require more space to conclude its analysis, tying all the previous sections together in an overall argument.

Your conclusion should begin with the main question that your thesis or dissertation aimed to address. This is your final chance to show that you’ve done what you set out to do, so make sure to formulate a clear, concise answer.

• Don’t repeat a list of all the results that you already discussed
• Do synthesize them into a final takeaway that the reader will remember.

An empirical thesis or dissertation conclusion may begin like this:

A case study –based thesis or dissertation conclusion may begin like this:

In the second example, the research aim is not directly restated, but rather added implicitly to the statement. To avoid repeating yourself, it is helpful to reformulate your aims and questions into an overall statement of what you did and how you did it.

Your conclusion is an opportunity to remind your reader why you took the approach you did, what you expected to find, and how well the results matched your expectations.

To avoid repetition , consider writing more reflectively here, rather than just writing a summary of each preceding section. Consider mentioning the effectiveness of your methodology , or perhaps any new questions or unexpected insights that arose in the process.

You can also mention any limitations of your research, but only if you haven’t already included these in the discussion. Don’t dwell on them at length, though—focus on the positives of your work.

• While x limits the generalizability of the results, this approach provides new insight into y .
• This research clearly illustrates x , but it also raises the question of y .

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

You may already have made a few recommendations for future research in your discussion section, but the conclusion is a good place to elaborate and look ahead, considering the implications of your findings in both theoretical and practical terms.

• Based on these conclusions, practitioners should consider …
• To better understand the implications of these results, future studies could address …
• Further research is needed to determine the causes of/effects of/relationship between …

When making recommendations for further research, be sure not to undermine your own work. Relatedly, while future studies might confirm, build on, or enrich your conclusions, they shouldn’t be required for your argument to feel complete. Your work should stand alone on its own merits.

Just as you should avoid too much self-criticism, you should also avoid exaggerating the applicability of your research. If you’re making recommendations for policy, business, or other practical implementations, it’s generally best to frame them as “shoulds” rather than “musts.” All in all, the purpose of academic research is to inform, explain, and explore—not to demand.

Make sure your reader is left with a strong impression of what your research has contributed to the state of your field.

Some strategies to achieve this include:

• Returning to your problem statement to explain how your research helps solve the problem
• Referring back to the literature review and showing how you have addressed a gap in knowledge
• Discussing how your findings confirm or challenge an existing theory or assumption

Again, avoid simply repeating what you’ve already covered in the discussion in your conclusion. Instead, pick out the most important points and sum them up succinctly, situating your project in a broader context.

The end is near! Once you’ve finished writing your conclusion, it’s time to wrap up your thesis or dissertation with a few final steps:

• It’s a good idea to write your abstract next, while the research is still fresh in your mind.
• Next, make sure your reference list is complete and correctly formatted. To speed up the process, you can use our free APA citation generator .
• Once you’ve added any appendices , you can create a table of contents and title page .
• Finally, read through the whole document again to make sure your thesis is clearly written and free from language errors. You can proofread it yourself , ask a friend, or consider Scribbr’s proofreading and editing service .

Here is an example of how you can write your conclusion section. Notice how it includes everything mentioned above:

V. Conclusion

The current research aimed to identify acoustic speech characteristics which mark the beginning of an exacerbation in COPD patients.

The central questions for this research were as follows: 1. Which acoustic measures extracted from read speech differ between COPD speakers in stable condition and healthy speakers? 2. In what ways does the speech of COPD patients during an exacerbation differ from speech of COPD patients during stable periods?

All recordings were aligned using a script. Subsequently, they were manually annotated to indicate respiratory actions such as inhaling and exhaling. The recordings of 9 stable COPD patients reading aloud were then compared with the recordings of 5 healthy control subjects reading aloud. The results showed a significant effect of condition on the number of in- and exhalations per syllable, the number of non-linguistic in- and exhalations per syllable, and the ratio of voiced and silence intervals. The number of in- and exhalations per syllable and the number of non-linguistic in- and exhalations per syllable were higher for COPD patients than for healthy controls, which confirmed both hypotheses.

However, the higher ratio of voiced and silence intervals for COPD patients compared to healthy controls was not in line with the hypotheses. This unpredicted result might have been caused by the different reading materials or recording procedures for both groups, or by a difference in reading skills. Moreover, there was a trend regarding the effect of condition on the number of syllables per breath group. The number of syllables per breath group was higher for healthy controls than for COPD patients, which was in line with the hypothesis. There was no effect of condition on pitch, intensity, center of gravity, pitch variability, speaking rate, or articulation rate.

This research has shown that the speech of COPD patients in exacerbation differs from the speech of COPD patients in stable condition. This might have potential for the detection of exacerbations. However, sustained vowels rarely occur in spontaneous speech. Therefore, the last two outcome measures might have greater potential for the detection of beginning exacerbations, but further research on the different outcome measures and their potential for the detection of exacerbations is needed due to the limitations of the current study.

Checklist: Conclusion

I have clearly and concisely answered the main research question .

I have summarized my overall argument or key takeaways.

I have mentioned any important limitations of the research.

I have given relevant recommendations .

I have clearly explained what my research has contributed to my field.

I have  not introduced any new data or arguments.

You've written a great conclusion! Use the other checklists to further improve your dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

For a stronger dissertation conclusion , avoid including:

• Important evidence or analysis that wasn’t mentioned in the discussion section and results section
• Generic concluding phrases (e.g. “In conclusion …”)
• Weak statements that undermine your argument (e.g., “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. & McCombes, S. (2023, November 20). How to Write a Thesis or Dissertation Conclusion. Scribbr. Retrieved September 9, 2024, from https://www.scribbr.com/dissertation/write-conclusion/

Is this article helpful?

Tegan George

Other students also liked, how to write a discussion section | tips & examples, how to write an abstract | steps & examples, how to write a thesis or dissertation introduction, what is your plagiarism score.