purchasing and supply chain management dissertation topics

159 Procurement Topics for Essays & Examples

Welcome to our awesome list of procurement topics! Here, you will find the best research topics in procurement, issues for discussion, and essay writing ideas. This list enumerates only the most current challenges in procurement, hot topics in supply chain management, and much more.

🔝 Top 10 Procurement Topics for 2024

🏆 best procurement topic ideas & essay examples, 👍 good procurement issues for essays, 🔍 interesting research topics in procurement, 📌 most interesting procurement topics to write about, 💡 procurement hot topics: simple & easy, 🔥 procurement research topics to write about, 👀 procurement topics for presentation.

• Negotiation Strategies in Procurement
• Strategies for Cost-Effective Purchasing
• How to Cultivate Strong Vendor Partnerships
• Ethical Sourcing and Sustainability in Procurement
• The Use of E-Procurement in Streamlining Processes
• Best Ways to Mitigating Supply Chain Vulnerabilities
• Supplier-Driven Product Development in Procurement
• Metrics for Evaluating and Improving Supply Chain Efficiency
• Public Procurement Policies and Transparency in Contracts
• Use of Procurement Automation for Enhanced Efficiency
• Saudi Aramco Company Procurement Process It is the work of respective managers, who are required to assess the viability of the procedure before recommending the appropriate action to the department.
• Strategic and Operational Roles of Procurement Within DHL As a multinational company, DHL relies heavily on the effectiveness of its procurement department to access all the supplies that it requires to meet the needs of its customers.
• H&M Company: Procurement and Supply H&M has to devote substantial attention to the ability of a supplier to ensure the quality and compliance with H&M’s social responsibility strategy and the Code of Conduct. Simultaneously, it is vital to assess the […]
• Procurement Management Whichever the option, a well managed procurement department and processes are beneficial to accompany in the following areas: The quality of a company’s products and services is subject to materials used in the production.
• Sustainable Sourcing and Procurement at Tesla The concept of sustainability seeks to address the environmental and economic issues affecting the business and society. The emphasis here is that such efforts should be coupled with a critical requirement that the suppliers follow […]
• Boeing Australia Limited Current Procurement Processes Noticeably, the greatest advantage of the short-term procurement improvements is that the company has by any means managed to satisfy the demands of its vast client base.
• Procurement Methods of the Construction Projects The vital significance of procurement in the success of any project necessitate for deliberate measures and consideration in the selection of the most appropriate procurement method.
• Contract and Procurement Management The plan identifies the products and services needed for the project, the types of contracts to be used for the entire project or in parts of the project, the approval of the contact, coordination of […]
• Saudi Oil & Gas Engineering, Procurement, Construction Due to the high level of dominance that Saudi has in the oil industry, the country plays a critical role in the determination of the world oil prices.
• Airlines’ Practical Guidelines in Procurement Process This paper examines how airlines can maximize the usefulness of practical guidelines that can be used to implement a performance-based contracting approach in their procurement process and the value the aviation industry will acquire in […]
• Nestle’s Coffee Bean Products Procurement The procurement of Nestle Coffee’s coffee bean products is based on the direct purchase of the beans with the farmers. The procurement of the Nestle coffee beans is based on the direct purchase of the […]
• Abu Dhabi National Oil Company’s Procurement and Supply Before choosing the type of sourcing for a particular product, the organization has to consider the state of the market for this good and determine its competitiveness, quality and cost margins, and significant players.
• Qualification-Based Selection Procurement This method is suitable for projects when the owner wants to gain the best price-quality ratio through a detailed analysis of offers.
• Aerospace Industry Risk and Procurement Management This paper aims to analyze the development and functioning of the procurement process in the example of Airbus. These components allow Airbus to control the information flow to and from its suppliers and to choose […]
• Procurement Risks and Contract Management The processes engaged include sourcing the supplier, agreeing on the terms of service, buying the products, receiving the commodities, inspecting if the supplied goods meet the order placed, and finally, keeping the records of the […]
• Centralization vs. De-Centralization of Procurement This study seeks to investigate the merits and demerits of each strategy relative to the vision of Qiddiya, which is a Saudi-based entertainment company with plans to venture into overseas markets.
• Procurement of Antimalarial Medicines in Africa and the Role of UNDP Many countries are interested in controlling the spread of these diseases by improving procurement services and the quality of medications that may be available to the African population.
• Strategic Purchasing: The Role of Procurement Department Strategic purchasing entails planning, implementation, evaluation, and controlling of strategic and operating purchasing decisions for directing all activities of the purchasing function toward opportunities consistent with the firm’s ability to achieve its long-term goals.
• Cost Analysis of the Mayo Clinic Contract Procurement Once the cost analysis has been done, the company can pick which method of costing will be employed in the future for the company.
• Construction Procurement in Industrialised Building System At the very beginning, the authors of the article began with the definitions and background of the term procurement in the construction industry.
• National Shipbuilding Procurement Strategy in Canada The National Shipbuilding Procurement Strategy, commonly referred to as the National Shipbuilding Strategy, is a long-term initiative that aims to rebuild Canada’s shipments, notably the Canadian Coast Guard and the Royal Canadian Navy.
• Job Description: Procurement Manager You will also provide guidance to other employees in the purchasing process for maintaining the efficiency of stock optimization. In addition, you will have to adhere to the policies of our company related to supply […]
• Contract Procurement Methods and Price Adjustment The total cost comprises the total compensation of the project cost and all the quoted amount in the proposal for the services rendered to the client.
• International Engineering Procurement Construction The contractor will be responsible for assessing the design, procurement activities, the actual construction, commissioning and the handover to the owner or operator when the system is ready for operation to ensure that it is […]
• Managing Procurement and Supply The management should know the inclusions that should be made in the contract and measures that should be taken to ensure that changes in the market forces do not affect the agreements made in the […]
• Description for the Position of a Procurement Clerk To prepare purchase orders and send them to the appropriate departments and suppliers To determine whether the amount of inventory within the organization is sufficient for its operation, if not, the procurement clerk will be […]
• Driving Value Through Procurement and Supply In this paper, the author has analyzed procurement and supply and the aspect of seismic surveys. In ADCO, minimizing costs and determining the right place for products acquisition is the primary focus.
• IT Procurement in Health Care The use of IT in the healthcare industry is poised to make the industry become efficient, competitive, and more accessible to the clients. Luckily, the solutions to the problems bedeviling IT procurement in healthcare lie […]
• P&G Procurement Automation: A Pioneering Story of Technology In order to terminate the supply chain inefficiencies connected with “the high inventory and transportation costs and the variability in shipments”, the two companies agreed on eliminating the intermediary chain and introducing a revolutionary information […]
• The Importance of Procurement in Public Organizations The primary goal of public procurement is to “obtain the right goods, capital assets or services…in the right quantity, for delivery at the right time to the right place, from the right source…with the right […]
• Project Procurement & Ethics Success and sustainability of the project is a key factor to the realization of the set project, both to the department and the project implementers.
• Procurement and Production in Planning Cycle This objective is achieved by curtailing the collective allotment cost of allocating goods to the clients based on the worthiness of the services.
• E-Procurement and It Application in the Grant Group The model for the interactions conducted through the electronic data interchange for e-procurement can vary depending on the requirements of the parties and the business.
• Procurement in Project Management This is one of the systems that are commonly used in procurement of various projects. When this system is used there is reduction of impact of work changes to work nature in the management of […]
• Off Season Fashion Sales: Procurement in Retail Karakul’s 2008 article “Joint Pricing and Procurement of Fashion Products in the Existence of a Clearance Market published in the International Journal of Production Economics, cites that in the apparel industry, the dilemma of always […]
• Ethical Issues in Procurement Management The Purchasing Managers’ Index is grounded on a monthly investigation of associates of the Swiss Association for Materials Management and Purchasing.
• General Electric Company: Procurement and Acquisition Practices Currently, GE deals in a wide a range of products and services spanning from aircraft engines and parts, medical imaging, financing and power generation to industrial products, and oil and gas production implying that the […]
• Contracting Excellence in Procurement and Supply Between ADCO and Emirates Transport Also, the contract is beneficial to the service receiver in terms of knowledge power since it grants ADCO the right to access and audit the contractor’s facilities and information peculiar to the provided services.
• Procurement Planning in Companies The objective of a procurement manager should be to avoid such issues and report them when necessary to the company’s executives.
• Abu Dhabi National Oil Company’s Procurement & Supply The procedure involved is critical in ensuring the maximization of profits and the reduction of the cost of production. The price mechanisms applied must conform to the situation of the industry and have the ability […]
• Abu Dhabi Company for Onshore Oil Operations’ Procurement & Supply Contracts The issues include “performance of the Services, acceptance of the Services by ADCO, and the right to require the correction of faults and deficiencies in any part or all of the Services which is not […]
• The BBC Company Procurement Strategy Analysis While collaborating with the BBC Technology in order to enhance the quality of the services provided by the organization seemed an obvious solution to the company’s concerns, the decision to be made was fraught with […]
• Green Procurement and Its Development in Hong Kong The topic, which is widely linked to the wider agenda of sustainable development, has in the recent past been a point of interest for many businesses, governments, organizations and other stakeholders.
• Procurement Opportunities in Construction Management The choice between the four types of procurement available in the construction industry leads to a sharp rise in the quality of the result.
• McLaughlin & Harvey Firm’s Cement Procurement Strategy Negotiation is a critical instrument outlined in this document to develop the sourcing plan and is useful in improving some of the rights that stakeholders wield in the larger procurement and supply model.
• Durable Vinyl Siding Corporation’s Procurement Costs The aim of this paper is to examine a case study of a siding manufacturer, Durable Vinyl Siding Corporation, and to provide its director of sourcing and procurement with extensive information on methods for reduction […]
• Kayan Petrochemical Company Procurement and Supply The study was conducted to determine the procurement and supply chain of polymers by SABIC through the dedicated function of Kayan that specializes in the development of the polymeric material as a feedstock for the […]
• Max Bögl Company’s Procurement Management The list of the identified risks is provided in the following table where each risk factor is rated on a five-point scale according to the likelihood of its occurrence and potential impact on the project […]
• Rügen Bridge: Plan Procurement Management During this time, the company in charge of the project had not only built a bridge, the core part of which is 4100 meters long, but also contracted other businesses to prepare the surface, smooth […]
• Contracts and Negotiation in Aviation Procurement The procurement department has to be keen during the identification and eventual provisioning of the goods or services to ensure that the management makes strategic decisions.
• Organ Procurement Organizations’ Activities By doing so, they can ensure that donor organs are put to the best possible use and that the recipients will, in turn, live more fulfilling lives because of them.
• Procurement Trends in the Aviation Industry Elements of performance-based contracting that have changed the procurement trends in the aviation industry include the need to achieve maximum levels of quality during delivery, and the provision that remuneration applies only to goods and […]
• Industrial Purchasing and Procurement Website This supposition is based on the fact that after the purchase of raw materials the latter will be converted to the finished product. The suppliers can connect to the customers and offer their services on […]
• Abu Hail Health Center: Materials Management and Procurement Process The purpose of this paper is to map out and analyze the materials management and procurement processes in Abu Hail Health Center, Dubai, identify the gaps and redundancies in their current SCM and propose a […]
• Project Procurement Closeout Plan Contract close-out is the responsibility of both of the sides to ensure that all the terms outlined in the contract were followed, and all the deliverables are exchanged by the parties.
• E-Procurement in Purchasing and Supply Management People start spending less time on the recognition of their needs, the identification of possible suppliers, the analysis of the opinions, the determination of delivery issues, the processes of placement and payment of their orders, […]
• Procurement and Supply in Managing Expenditures The first section entailed the analysis of the practical roles of stakeholders in the process of procurement. The final section entailed the application of the 5-R model to examine the aspects of the purchase that […]
• Company Procurement Management Plan The aspects of time, cost, and performance form a triangle demonstrating the cycle of the development of the project, which is rather challenging to stay within for a planner due to the uniqueness of most […]
• Public Procurement in the Czech Republic in 2008-15 The goal of this report is to measure the CRI with references to the identified risk indicators associated with public procurement in the Czech Republic during the period of 2008-2015.
• Fauquier Gas Company’s Procurement and Purchasing The manager for supply and purchasing, Bill Murphy, is concerned with the provision of the required tubes within the given time, although it is possible that the company will not be able to make the […]
• Hong Kong Textile and Apparel Industries Procurement The article “Strategic Procurement in Textile and Apparel Sourcing Companies in Hong Kong: A Practitioner’s Perspective” identifies different elements of procurement and strategic sourcing.
• Procurement Practices for Efficient Procurement Processes The author draws parallels between the procurement practices in the two companies in a bid to find out which set of procurement practices is best suited to a company.
• Michael Porter: Procurement Is Vital for Businesses Due to synergy in procurement process, the support of other companies is important to allow the procurement function to evaluate and bargain the prices with the suppliers across the market in search of the most […]
• Effects of Procurement Fraud on the US National Economy However, it is apparent that the increased movement of personnel from the private sector to the public sector and likewise from the public sector to the private sector heightens the risk of fraud.
• Procurement Cycle for Purchases However, the HP management was later faced with anxiety due to a high degree of uncertainty of the demand and supply of the flash memory, which in turn affects the prices of the printers.
• Procurement and Its Role in the Organization’s Processes Created by Aiden Platt, the presentation titled “Procurement: An Emerged Profession” concerned the specified phenomenon and covers the significance of procurement within an organization, as well as defines the role of the former in a […]
• Tendering and Procurement in the Construction Industry The complex nature of the collaborative construction contracts also poses the issues of mistrust, and the scandals concerning the accountability of the parties involved in the contract agreements.
• Public Procurement – Post Disaster Development Haiti In the event of deprivation of the natural resources, the investors will return to their mother country and leave nothing for the locals.
• UPS Procurement Strategy Analysis According to the UPS Supply Chain Solutions, ‘the company spent billions of dollars in a state-of-the-art tracking system and in the investment of some of the latest technologies in the industry’.
• Procurement to Build New Auditorium Documentation of the relevant issues pertaining to the project will be undertaken by competent procurement managers to plan and organise all the materials and resources required for completion of the project.
• DVS Company Issues: Sourcing, Procurement, and Overcrowding When it comes to the issue of sourcing and the issues that the DVS Company is currently facing in the given field, one must admit that the company’s problems stem mostly from inadequate sourcing.
• The Effect of Market-Type Procurement on the Public Sector In this particular context, the UK government chose this procurement model because it has the ability to increase choice for consumers, the rate of effectiveness as well as responsiveness of the service providers.
• Terms and Conditions in Business Relationships As to the ensuring aspect, the supplier is to take the responsibility for providing the described quality of the goods, which means that one is equally in charge of the production of the item and […]
• The Added Value of Procurement However, in business procurement, researchers conceptualize value in business relationships in terms of the value of the supplier bundle of products and services that is exchanged at a price to the purchaser and the long […]
• Procurement and Acquisitions The Federal Acquisition Regulations requires that the Federal agencies should influence the acquisitions of the various agencies in fostering markets in order to enhance sustainable materials, technologies, services, and products.
• IS/IT Procurement: How Automation of Invitation Tender Can Support and Assist Companies The slowest to move in to automation is the industrial and manufacturing world, but this trend has changed as more and more of these companies seek improvements on their services and production. In essence, the […]
• Procurement of Goods: Decision Support System Development In turn, the main objective of the DSS is to optimize the supply chain and minimize the likelihood of stock-outs and oversupply.
• An Internet Based Procurement Service The company targets clients from all over the world and hopes to be a major global online procurement service provider in the near future. Therefore, the company will be able to facilitate the purchase of […]
• Development Opportunities in Procurement Service We will work hand in hand with our customers to add value and surpass their expectations by enhancing our customer service, tools, organization, and the proficiency of our personnel.
• Procurement Plan Between Silwan Food International and AGS Logistics LLC The main reason why companies outsource the services is to enable them to concentrate on their core activities of meeting the needs their customers and also in meeting the objectives of the firm.
• Project Management Procurement: Supply and Purchase It is proper for the managers to establish the evident gaps and varied needs in the institutions that require integration before the initiation of the procurement process.
• Benefits of the Public Private Partnership Procurement Model Furthermore, the public-private partnership has been able to utilize the qualifications of the management improving the efficiency of the private sectors, with maintenance of the output’s quality standard.
• Procurement Strategies for Companies When Encountering Natural Disasters The concept of procurement directly relates to the process of acquiring goods or services whether in a way that enables a company to meet the needs of its clientele in terms of the quality of […]
• The Evolution of US Military Logistical Procurement The success of the revolutionary war was attributed to the logistics employed by the George Washington as he coordinately combined the continental army and local militia and focuses his attacks on the weakest points of […]
• Procurement and Contracting Process The outsourcing process will enable the company to invest the available capital in the core of the business. The outsourcing contract has to be designed in a way that it secures the company’s independence in […]
• Public Procurement for Innovation as Mission-Oriented Innovation Policy
• Procurement Strategies: Advantages and Disadvantages
• The WTO Government Procurement Agreement and Its Impacts on Trade
• Lobbying and Contract Delegation in Public Procurement
• Optimal Procurement When Both Price and Quality Matter
• Procurement and Acuisitions Management: Fair Housing Internship
• Optimal Procurement Mechanisms for Divisible Goods With Capacitated Suppliers
• Optimal Cost Overruns: Procurement Auctions and Renegotiation
• Methods for Evaluating Proposals Bidding in Public Procurement to Internal Forces
• Managing Supply Disruption Through Procurement Strategy and Price Competition
• Technology-Based Small Firms and Regional Innovation Potential: The Role of Public Procurement
• Production And Procurement Management In Aviation
• The Agency Theory Approach to the Public Procurement System
• Improving Procurement Lead Times At Hill Air Force Base
• Fractional Institutional Endeavors and E-Procurement in Local Government
• Managing Electricity Procurement Cost and Risk by a Local Distribution Company
• Procurement: the Transaction Costs Perspective in a Globalising World
• Quality Management and Procurement in Construction Industry
• Procurement: Purchasing Management Association
• U.S. Procurement and Strategic Sourcing Activities
• Performance Indicators for Monitoring the Public Procurement
• Transportation Procurement With Seasonally Varying Shipper Demand and Volume Guarantees
• Procurement Outsourcing Strategies: Wonderful Widgets
• The Key Procurement Issues for the Client Construction
• Supply Chain Risk Management in Procurement and Logistics
• Public Procurement and Reputation: An Agent-Based Model
• Purchasing and Procurement Strategy in Food Industry Marketing
• Procurement With Costly Bidding, Optimal Shortlisting, and Rebates
• Procurement Strategy for Aboriginal Business
• Selecting the Most Appropriate Procurement Strategy
• The Procurement Strategy Selection Analysis Job Construction
• Procurement With Unenforceable Contract Time and the Law of Liquidated Damages
• Local Food Procurement and Promotion Strategies of Food Cooperatives
• Sequential Procurement Auctions and Their Effect on Investment Decisions
• Limited Liability and Mechanism Design in Procurement
• Research Design and Methodology for Procurement in Public Sector
• Understanding the Innovation Impacts of Public Procurement
• Government Procurement and the Growth of Small Firms
• Procurement, Conversion and Logistics Management
• Reputation, Competition, and Entry in Procurement
• Strategies for Managing Disruptions in Procurement
• Ways to Establish Supply Chain Transparency
• Procurement Resilience During the COVID-19 Pandemic
• Procurement Ethics: Legal and Regulatory Challenges
• Environmental Criteria for Sustainable Procurement
• Social Responsibility Regarding Supplier Diversity in Procurement
• The Impact of Globalization on Procurement Strategies and Practices
• Identifying Red Flags and Preventive Measures for Procurement Fraud
• Artificial Intelligence and Procurement: Applications and Future Implications
• Risk Assessment in International Procurement in Times of Economic Uncertainty
• Sustainability in Procurement Decision-Making
• Introduction to Procurement: Basics and Key Concepts
• Best Practices in Procurement Used by Industry Leaders
• AI, Blockchain, and Other Innovations in Procurement
• Identification and Mitigation of Supply Chain Vulnerabilities
• Outsourcing vs. Insourcing for Strategic Procurement Decisions.
• How to Cultivate Strong and Collaborative Partnerships with Suppliers
• Challenges and Opportunities of Public Procurement in the Government Sector
• Optimizing Supplier Selection and Negotiation Strategies for Strategic Sourcing
• Measuring Procurement Performance: Key Metrics and KPIs for Success
• Agile Project Management Research Topics
• Contract Law Research Ideas
• Online Shopping Questions
• Grocery Store Essay Topics
• DHL Research Topics
• FedEx Ideas
• Operations Strategy Titles
• Construction Management Research Topics
• Chicago (A-D)
• Chicago (N-B)

IvyPanda. (2024, March 1). 159 Procurement Topics for Essays & Examples. https://ivypanda.com/essays/topic/procurement-essay-topics/

"159 Procurement Topics for Essays & Examples." IvyPanda , 1 Mar. 2024, ivypanda.com/essays/topic/procurement-essay-topics/.

IvyPanda . (2024) '159 Procurement Topics for Essays & Examples'. 1 March.

IvyPanda . 2024. "159 Procurement Topics for Essays & Examples." March 1, 2024. https://ivypanda.com/essays/topic/procurement-essay-topics/.

1. IvyPanda . "159 Procurement Topics for Essays & Examples." March 1, 2024. https://ivypanda.com/essays/topic/procurement-essay-topics/.

Bibliography

IvyPanda . "159 Procurement Topics for Essays & Examples." March 1, 2024. https://ivypanda.com/essays/topic/procurement-essay-topics/.

• Find a Freelancer
• Terms and Conditions

Login to Plusacademics

By joining I agree to receive emails from Plusacademics.

Not a member yet? Join now

Reset Password

Enter your Plusacademics profile email and we’ll send a password reset link.

Back to Sign In

Welcome to Plusacademics!

Hundreds of unbeatable services provided through a secured connection.

8 characters or longer. Combine upper and lowercase letters and numbers.

By signing up, I agree to Plusacademics's Terms of Services By joining I agree to receive emails from Plusacademics.

Already a member? Sign In

Welcome to Plusacademics.

Your purchase have been successfully completed

Welcome to Plusacademics

Looking for a freelancer; designers, writers…, browse 100s of experts today and get it done correctly..

[email protected]

50 Supply chain and logistic dissertation topics for 2024

The meaning of supply chain management

To look into supply chain management. There is a poor understanding of how the supply chains operate. Therefore, elaborating how these systems can be managed is necessary. The same issues are evident in the search for supply chain thesis topics.  Most interesting supply chain topics are already researched in detail. Therefore, getting a better topic that can be defended at ease is quite challenging. Despite having our well-researched topics online, you can also access supply chain management thesis topics pdf from our website. we have also compiled a list of Ph.D. topics.

1. Impact of Ukraine and Russia war on global logistics and supply chain

This topic tries to find the consequence of the ongoing war in Europe on the supply chain and logistics of the world. This is one of the best logistic dissertation topics for 2022 that is not yet covered in length. Therefore, one can easily develop a  great thesis from it.

2. Africa as a new heart for the global supply chain

This topic tries to explain why Africa is the new emerging market and manufacturing hub for global supply. Africa has untapped potential such as cheap labor that may be utilized to meet global supply needs.

3. Strategies used for cost reduction in supply chain management

 To find out how to minimize expenditure during supply. High costs tend to affect the outcome in the provision cycle.

4. Effects of E-logistics on supply chain

To determine the outcome of E-logistics on any given process during the distribution of goods or services. Failure to recognize better ways of reaching out to those involved in supply. This is one of the most diverse supply chain management research topics of 2022. It still has so much gap to be covered.

5. Mobility solutions for supply chain

To identify faster ways to efficiently move goods or services. The delay faced during supply has a negative impact on all the participants.

6. Importance of digital transformation on supply

To reveal how adapting to new technology impacts business outcomes. Some employees are unwilling to adapt to change and hence resist training.

7. An analysis of supply chain integration

Evaluating whether incorporation of many participants improves results. Getting onboard partners that are unable to meet deadlines.

8. Evaluating supply chain resilience

Assessing how adaptable the systems are to change. Maintaining the new changes can be challenging.

9. Critical analysis of supply chain agility

To discover how fast businesses can adjust to meet the market requirements. Some firms take a long time to remodel to be at par with current trends.

10. Evaluating risks involved in the supply chain

Gauging the dangers that one can encounter in the supply process. Some risks are man-made and hard to deal with.

11. Managing the supply chain globally

To figure out ways of staying afloat in the market in many regions. There is high competition affecting supply and demand globally which some producers fail to meet.

12. Optimizing costs of the supply chain

To work out methods of upgrading product value while retaining a reasonable price. Upgrading products leads to a rise in prices.

13. Supply chain progressive gradation

To determine how to maintain growth. Stagnation affects most production firms at some point.

14. Effects of leadership changeover in supply chain

To know how to keep the chief officers for longer periods. Getting new employers can affect businesses negatively since they need time to master the new roles.

15. How environmental changes affect the supply chain

To deduce whether the climate can affect the supply chain. It is hard to predict the changes that can occur within a locality.

16.  What does big data do to supply chain management?

To evaluate the impact of a variety of high-volume data in supply chain management. There is limited room for improvement. 

17. Impact of the Green project on the supply chain

To investigate how managers can integrate environmentally friendly processes during production. Establishment of firms with no consideration of their impact on the environment.

18. Importance of Total Quality Management

To evaluate the importance of every member of the team maintaining high standards in their various areas. Pulling in the same direction will always be a cutting edge for all organizations.

19. Effects of political factors on supply chain management

To look into issues related to the government that could influence how goods flow from one point to the next. Regional instabilities due to wars interrupt the normal flow of products.

20. How the law affects supply chain management

To prove that some laws can hinder business systems from normal operation. Businesses that do not meet the stipulated codes of conduct are not allowed to run. 

21. Studying how the IoT works in relation to the supply chain

To ascertain if supply chain management depends on IoT for its smooth operation. Some businesses are unable to keep up hence lose customers.

22. Fourth Industrial Revolution and supply chain management

To determine if 4IR is beneficial to supply chain management. Specialization and flexibility are costly as boundaries become more blurry.

23. Establishing the relationship between supply chains and the performance of firms

To show how a firm’s potential affects the movement of its products. Failing firms can hardly have sustainable supply chains.

24. Effects of Covid-19 on supply chain management

To determine how the pandemic affected businesses and their customers. The pandemic caused businesses to shut down while others had to change modes of operation.

25. Profit maximization in supply chain management

Identifying how to get the most out of the goods and services produced. Wrong pricing of products leads to massive losses that are damaging to the firms.

26. What roles do technological changes play in the supply chain?

To expose how technology is shaping the production of both goods and services. Rapid technological changes have had a huge impact on supply chains. 

27. Importance of business relationships in supply chain management

To plan how beneficial partnerships can be established. Poor consumer supplier relations disrupt efficiency.

28. How is manufacturing important in the supply business?

To establish how significant manufacturing is in the supply chain business. Expensive processes are involved due to a lack of proper planning.

29. Customer satisfaction in relation to supply chain management

To find out how best to meet consumer needs. Good or service production without customer participation.

30. Impact of supply chain management on business

To research the extent to which supply chain management affects any given organization. Inefficient managers lead to the collapse of supply chains. 

31. Supply chain efficiency versus effectiveness

To clarify what the two terms mean in the supply chain. Producers are incapable of differentiating the two concepts.

32. Significance of logistics

To know how to handle logistics to maximize output. Lack of qualified logisticians to handle the procedures involved. 

33. Does analytics in supply chain matter?  

To demonstrate the significance of analytics in supply. Insufficient information on analytics.

34. How supply chains can affect a country’s growth and development

To point out ways in which a disruption in supply chains can cripple progress. Inadequate resource allocation.

35. Use of AI in organizations

To make a comparison between artificial intelligence and human intelligence in firms. Laxity in embracing the use of machines in making decisions.

36. The future of supply chain management

To analyze what lies ahead in the product distribution sector. Inability to correctly predict the market trends.

37. Types of supply chains

To name and list the types of supply chains. Lack of clarity on the types of supply chains that exist.

38. How firms adhere to supply chain ethics

To determine how ethics affect organizations. Inadequate knowledge on the functions of these ethics.

39. Importance of supply chain management to the society

To give a detailed explanation of how the people benefit from proper regulations of supply chains. Few people understand what is involved in production and supply.

40. Supply chain visibility

To discuss how visibility can be maintained from the initial to the final stage. Few suppliers have the ability to trace their goods.

41. How an organization can ensure supply chain sustainability

To find out how companies deal with social, economic, and environmental issues in the process of supplying goods or services. There is disregard for issues that arise relating to the products being distributed.

42. How quality control works in supply chain management

To understand the role of quality control in supply chain management. Suppliers ignore matters related to quality controls resulting in poor outcomes.

43. Essential supply chain management tools

To find out which tools are used. Inability to recognize what is required for successful operations.

44. Lack of qualified personnel in the supply chain

To elaborate on the effect of fewer qualified professionals in supply chain management. Supply chain jobs were not considered to be as valuable.

45. Issues faced by supply chain managers

To state challenges that managers go through. Lack of experience in handling customers hence inability to solve the problems that arise.

46. Challenges that operation managers face currently

To discuss what operation managers experience in their line of work. Lack of the right skills to tackle problems.

47. How operation management is crucial in supply chain management

To bring out the significance of operation management.

48. The key elements in logistics

To describe the elements in logistics. Very few people understand the concept and how it works.

49. Logistics versus supply chain management

To bring out the difference between the two processes. Both deal with the end products in an organization.

50. The probability of supply chain managers being replaced by robots

To establish whether machines will take full control of the supply industry. It is difficult to tell really but it is a very interesting area to delve into.

Popular Post

Compxm answers 2024, how to win capsim competition 2024, free 971 compxm final exam answers 2024, our clients reviews.

- best capsim score ever

- worthy capstone simulation result ever

- compxm 2023

- compxm help

- best capsim help

- best capsim answers

- best academic help 2022

- 970 capsim score 2023

- best capstone help 2023

- best capstone cheat result 2023

• (+34) 976 077 600

Supply Chain Management Thesis Topics- Top 30 Ideas

One of the most frequently asked question from SCMDOJO followers is, I am doing Supply Chain Management Masters from  Europe ,  UK  or  USA  and I need some Master Thesis ideas in Supply Chain?

Key academic research areas in SCM are offering robust and implementable supply chain management thesis that are transforming worldwide trends. The increasing strength of global Supply Chain Management (SCM) is one functional area that shows several students are seeking a good start, especially in solving significant problems in the form of  Masters  and  PhD thesis .

Nevertheless, with the changing trends in the industry, some students are likely to struggle with the early stages of academic writing. A significant reason for this problem is usually down to a lack of ideas or facing new topics with low research activity.

Old Industries and New Industries

The recent pattern shifts in academia, from the traditional research approach to other conventional methods, is taking a more student-centred view. Most of the supply chain management thesis is crafted by students, including dissertation, topic creation, research, and more with help of their supervisors.

With new industries, like Amazon and Apple, transforming old concepts with technological disruption, there are new trends to look out for to help narrow your supply chain management thesis.

The  7 Powerful Supply Chain Trends  (I also dubbed “Supply Chain 7.0”) have the potential to become a powerful influence over time. These trends, including Augmented reality (AR), Big Data, Gamification of the supply chain, moving supply chain to “Cloud,” and Internet of Things (IoT) – Industry 4.0. Also, Artificial Intelligence (AI) and machine learning in supply chain alongside 3D Printing are now needed to support the product life cycle.

Forbes also highlights the key  2020 Supply Chain Technology Trends  that are receiving lots of buzz in Supply Chain Management. In this regard, students seeking top-notch research areas for supply chain management thesis can consider new trends to help create adequate research content.

30  Supply Chain Management Thesis Topics for 2020

On these premises, any supply chain management thesis should be comprehensive. There several topics and areas to consider, and below are 30 Supply Chain Management Thesis Topics for 2020 that students can do research on towards an excellent postgraduate study in SCM.

Digital Transformation

• Digital Transformation Key Attributes; Challenges; enablers & Success Factors
• Smart Government Initiatives: How Governments are Driving Digital Change
• Digital Leadership linking to Virtual Teams or Self Organised Teams (Agile PM)
• COVID 19 impacted the implementation of Digital Transformation?
• Cross-functional collaboration in the decision-making process.
• The value of data and interdependencies in decision-making.
• Machine learning techniques in supply chain management

Sustainable Project Management (SPM)

• Can apply the SPM model or any of its dimensions to any type of project
• Can Blockchain help with Sustainable Project Management?
• Factors affecting the application of an efficient supply management system.

IoT- Industry 4.0 and Big Data

• Application of IoT in Logistics – Challenges; enablers & Success Factors
• The practicability of intertwined supply networks with IoT.
• Implementation of IoT in 3PL/4PL Industry – Challenges; enablers & Success Factors
• Big data and impact in DDMRP
• Evaluation of technology use in modern supply chain management.
• The extension of supply chain resilience through Industry 4.0
• The Impact of Industry 4.0 on supply chain management.
• Implementation of E-logistics in Supply Chain Operations.

Operations and Supply Chain Management

• Risk Evaluation and Management involved in a supply chain
• Partnerships Perspective in Supply Chain Management
• Assessing Supply Chain Risk Management Capabilities
• Implementation of Green Supply Chain Management Practices
• Supply Chain Management Practices and Supply Chain Performance Effectiveness
• The Impact of Supply Chain Management Practices on the Overall Performance of the org
• The Influence of Environmental Management Practices and Supply Chain Integration on Technological Innovation Performance
• The Relationship between Total Quality Management Practices and their Effects on Firm Performance
• Level of Commitment to Top Management regarding the TQM Implementation
• Impact of Mobility Solutions (transportation / latest technologies) on logistics.
• Study on the roles of supply chain management in corporate outsourcing.
• Evaluating strategies for cost reduction in SCM relating to exports and imports.

Try Audible and Get Two Free Audiobooks

The supply chain systems of today are more likely to see massive changes technologically in the coming years. Some selected supply chain management thesis topics may face limited data or access to real-time data in making proper research and forecast, including seasonality and trends. So, due diligence is necessary to ensure you not only pick an exciting supply chain management thesis, but you also have sufficient access to data, studies, and materials useful in such an area. The impact of these trends alongside technological advancement in the selected areas would certainly help your thesis stand out and unique.

If are looking for more articles in the education category,  you can visit this page

Recommended Books

How to get a phd: a handbook for students and their supervisors.

How to Get a PhD: How to Set Yourself Up for Success in the First 12 Months (Getting My PhD)

About Dr. Muddassir Ahmed

Dr. Muddassir Ahmed is a global speaker, blogger and supply chain industry, expert. Dr Muddassir Ahmed has received a PhD in Management Science from Lancaster University Management school. Muddassir is a Six Sigma black belt and has founded scmdojo.com with the intention to enable supply chain professionals and supply chain teams to solve the problems they face in their jobs & business.

Follow SCM Dojo Social Networks

About Zaragoza Logistics Center

Zaragoza Logistics Center is a research and educational institute affiliated to the  Massachusetts Institute of Technology  and the  University of Zaragoza .  Core research areas  in logistics and supply chain management at Zaragoza Logistics Center (ZLC) strive to be actionable and applied so that people and organizations can make decisions and take action.

Zaragoza Academic Partnership (ZAP)

The Zaragoza Academic Partnership (ZAP) Program  allows companies to sponsor ZLC students’ thesis projects for both masters  ZLOG , ZLOGb and MDSC . It is an initiative to enhance applied research and bring industry-academia relationships closer together in the field of supply chain management. Each year students are required to complete thesis projects and many of them work with our partner companies on challenging and innovative research projects through the ZAP Program.

• Privacy Overview
• Strictly Necessary Cookies
• Tracking Cookies
• Social Media Cookies
• Cookie Policy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookie is used to remember your other cookie preferences of this website. If you disable this cookie, we will not be able to save your preferences and you will need to enable or disable cookies again the next time you visit our website.

This website uses it's own cookies to track the success of our marketing campaigns. Also, we use Google Analytics to give us anonymous information such as the number of visitors to the site, and the most popular pages. Keeping these cookies enabled helps us to improve our website.

Please enable Strictly Necessary Cookies first so that we can save your preferences!

We use additional cookies from Facebook, Twitter and LinkedIn to help us know the impact of our activities in social media.

More information about our Legal Notice, Privacy Policy and Cookies Policy.

Click here to place an order for topic brief service to get instant approval from your professor.

47 Procurement Research Topics Ideas and Examples

Procurement Research Topics

Procurement is a very vast domain of academics where different other disciplines can work as well. Basically, procurement obtains services as well as goods for different business purposes. However, the domain is not at all limited to this area only. Research topics in procurement cover all the related aspects of procurement, both on national as well as international levels. Procurement research topics also cover the areas of interconnection among procurement, logistics, and supply chain management . Depending on the degree level and academic program, the complexity of the research topics in procurement may vary. This is to provide the maximum level of ease for the students.

Best Procurement Research Topics for college students

Procurement dissertation topics have been presented below in the form of an extensive and all-inclusive list:

• Optimizing Strategic Procurement Sourcing in the Automotive Industry: A Comparative Analysis of Supplier Evaluation Matrices”
• Green Procurement Practices in Car Manufacturing: Leveraging the Internet of Things for Sustainable Supply Chains
• Enhancing Supplier Performance through Reverse Auctions: A Transaction Cost Economics Perspective in Procurement Management
• Efficiency and Effectiveness in Procurement Cycles: Leveraging Data Accessibility for Improved Decision Making in Car Manufacturing
• Supplier Improvement Processes in Healthcare Supply Chains: A Comparative Study of Procurement Opportunities
• Exploring the Role of Democracy in Public Infrastructure Procurement: A Case Study Analysis
• Outsourcing in Construction Projects: Evaluating Procurement Methods for Cost Efficiency and Quality Assurance
• Data Availability and Its Impact on Procurement Strategy: A Case Study of BBC Company’s Procurement Practices
• The Integration of Internet of Things in Supply Chain Management: A Case Study of Procurement Strategies in Healthcare Sector
• Analyzing Procurement Methods in the Context of Strategic Sourcing: A Comprehensive Review of the Procurement Cycle for Purchases
• Comparative analysis of procurement modes and framework conditions in developed and developing countries of the world.
• Public procurement in the healthcare sector of X country: focus on procurement tools.
• Defense procurement: a systematic analysis.
• Relation between Defence procurement and industry policy in X country.
• SME-friendly procurement: connecting rhetoric with reality.
• Government construction procurement and data mining: a descriptive study.
• Procurement performance in the energy sector: focus on procurement quality controls.
• Co- procurement: a new avenue for challenges and interventions.
• Studying the impacts of procurement on cooperation in a firm.
• Procurement of construction work: focus on sustainability principles.
• Transportation service procurement: focus on potential challenges and interventions.
• Effects of procurement scheduling on the performance of engineer procure construct projects.
• Comparative analysis of PPP procurement in Finland and Ireland.
• Effects of procurement strategy and price competition on the management of supply disruption.
• Impacts of innovative friendly procurement practices on enhancing innovation in firms of X country.
• Procurement and procurement risk management: a systematic study.
• The role played by organizational structure and procurement complexity on E-procurement systems.
• Procurement of innovation in social services: focus on strengths and challenges.
• Effects of electronic marketplaces on improving the performance of organizational procurement.
• Studying the impacts of digitalization, standardization, and centralization on procurement performance of local government in X country.
• Strategies for enhancing sustainable public procurement behavior.
• Effects of cooperative forest fuel procurement strategy on transportation costs.
• Agribusiness procurement practices: focus on challenges and interventions.
• Correlational analysis of sustainable development, legal practices, and procurement practices in X country.
• How is an organization’s strategic alignment linked with procurement?
• Transportation procurement: a review of the literature.
• Corruption in government procurement: focus on developing countries of the world.
• Relationship between public health of Third World countries and vaccine procurement methods.
• Sustainable procurement: a review of the literature.
• Effects of organizational culture on corporate social responsibility and sustainable procurement.
• Risk management in construction projects and procurement methods.
• E-procurement system: how its development and implementation is achieved in X country.
• Sustainable public procurement projects and change agents: a correlational analysis.
• Domestic industry and Defense procurement: a review of the literature.
• Green procurement: focus on challenges and interventions.

Above is the best list of Procurement Research Topics. Fill out the form below and get a dissertation topic mini proposal service from experts.

Paid Topic Mini Proposal (500 Words)

You will get the topics first and then the mini proposal which includes:

• An explanation why we choose this topic.
• 2-3 research questions.
• Key literature resources identification.
• Suitable methodology including raw sample size and data collection method
• View a Sample of Service

Note: After submitting your order please must check your email [inbox/spam] folders for order confirmation and login details. If the email goes in spam please mark not as spam to avoid any communication gap between us.

Get An Expert Dissertation Writing Help To Achieve Good Grades

By placing an order with us, you can get;

• Writer consultation before payment to ensure your work is in safe hands.
• Free topic if you don't have one
• Draft submissions to check the quality of the work as per supervisor's feedback
• Free revisions
• Complete privacy
• Plagiarism Free work
• Guaranteed 2:1 (With help of your supervisor's feedback)
• 2 Instalments plan
• Special discounts

Other Posts

• 47 Best Research Proposal Topics in Logistics March 1, 2022 -->
• What are the dissertation topics under supply chain management? November 17, 2021 -->

WhatsApp and Get 35% off promo code now!

Advertisement

Doctoral dissertations in logistics and supply chain management: a review of Nordic contributions from 2009 to 2014

• Original Paper
• Open access
• Published: 14 March 2016
• Volume 9 , article number  5 , ( 2016 )

Cite this article

You have full access to this open access article

• Christopher Rajkumar 1 ,
• Lone Kavin 1 ,
• Xue Luo 1 &
• Jan Stentoft 1  

17k Accesses

4 Citations

3 Altmetric

Explore all metrics

The purpose of this paper is to identify and analyze Nordic doctoral dissertations in logistics and supply chain management (SCM) published from the years 2009–2014. The paper is based on a detailed review of 150 doctoral dissertations. Compared with previous studies, this paper identifies a trend toward: more dissertations based on a collection of articles than monographs; more dissertations focusing on inter-organizational SCM issues; a shift from a focal company perspective to functional aspects and supply chain-related research; and finally, a continued decreased focus on the philosophy of science. A score for measuring the significance of article-based dissertations is also proposed.

Similar content being viewed by others

Advancement of Supply Chain, Strategic Planning and Industry Innovation Based on the Fourteenth ICMSEM Proceedings

The Future of Logistics and Supply Chain Management: Changing Skill Sets and Smart Career Choices

Back in business: operations research in support of big data analytics for operations and supply chain management

Avoid common mistakes on your manuscript.

1 Introduction

One way to keep track of the progress of logistics and supply chain management (SCM) discipline is to analyze the doctoral dissertations within the research area. By reviewing such dissertations, it will be possible to gain some interesting information regarding the development and direction of research within the discipline. Specifically, such a review will help us to understand the different approaches in relation to research framework, methodologies, theories applied and the empirical interpretations. Furthermore, the review could not only provide valuable insights into potential research gaps within the discipline, but also pave way for recognizing interesting topics for future research [ 13 , 41 ]. Besides, given that PhD students are likely to form the next generation of established researchers, research conducted by them is important to the SCM discipline as it helps keeping the discipline on track with emerging topics as well as stimulate theory generation.

The number of PhD students in the Nordic countries has increased significantly during the last decades [ 24 , 41 ]. Based on the rise in the number of dissertations as well as their varying content, it is interesting to investigate the requirements that are part of completing a PhD dissertation. There has been an escalation in dissertations that are based on collections of articles instead of a monograph [ 41 ]. A reason for this might be an increasing pressure to publish at the universities [ 21 ], which might be driving PhD students to learn and master the craft of publishing from the very start of their career. No matter what, the culture of many research departments is characterized by a high focus on performance in terms of publications in ranked journals [ 2 , 20 , 22 , 27 ]. Therefore, by choosing an article-based dissertation, PhD students might have a better opportunity to work together with other PhD students and senior researchers; in doing so, they also learn how to “play the game.”

The first two comprehensive digest of doctoral dissertations completed within the Nordic countries was conducted by Gubi et al. [ 13 ] and Zachariassen and Arlbjørn [ 41 ]. These efforts provide PhD students, other academic staff as well as practitioners with an overview of what has been researched within the logistics and SCM area. These studies have also facilitated the comparison of Nordic dissertations themes to those in the USA (e.g., compiled by Stock [ 31 ] and Nakhata et al. [ 25 ]). Prior research has demonstrated that much confusion exists concerning SCM definitions and its overlap with logistics [ 32 ]. This paper extends the work of Zachariassen and Arlbjørn [ 41 ] that applies what Halldórsson et al. [ 14 ] call a relabeling approach between the terms of logistics and SCM. The purpose of this paper is to document the progress of doctoral work in logistics and SCM within the Nordic countries between 2009 and 2014. In all, 120 relevant dissertations were identified; however, we were unable to retrieve eight dissertations either in physical form or electronically; therefore, only 112 dissertations were reviewed. With a point of departure within the dimensions and classified categories of these two above-mentioned reviews, this paper provides two analyses:

An analysis of identified Nordic dissertations from the year 2009–2014; and

A longitudinal analysis that compares the above analysis with the result from Gubi et al. [ 13 ] and Zachariassen and Arlbjørn [ 41 ].

Accordingly, the analyses within this paper will not only reveal several important insights, but also identify new, potential research areas within the logistics and SCM discipline. Based on these insights, it will be possible to coordinate future research efforts and avoid any unnecessary replication or duplication of previous work.

The rest of the paper is organized as follows: Sect.  2 provides a brief literature review of earlier contributions dealing with doctoral dissertation reviews. Section  3 discusses the methodology used in this study; it also outlines the limitations concerning the chosen methodology. Subsequently, Sect.  4 discusses the results obtained from analyzing the Nordic dissertations. Finally, Sect.  5 concludes with the overall purpose of the paper and some directions for future research activities.

2 Extant literature on doctoral dissertations in logistics and supply chain management

Several authors have analyzed and classified doctoral dissertations in logistics and SCM, both within the Nordic countries as well as the USA. In this section, nine prior studies—seven American studies and two Nordic studies—are briefly mentioned so as to identify the trends in topical coverage through the years and to see whether there are any similarities between the topics chosen by PhD students across the Atlantic.

The first study of compendiums of PhD research in logistics conducted by Stock back in 1987 [ 28 ] examined 684 dissertations from the period 1970–1986 [ 29 ]. Subsequent reviews were conducted in (1) 1993 covering 422 American dissertations that were completed in the period of 1987–1991 [ 34 ] and (2) 2001 with an analysis of 317 PhD dissertations completed in the period of 1992–1998 [ 31 ]. In 2006, Stock completed his fourth review of PhD dissertations together with Broadus [ 33 ]. This study showed a distinct increasing trend in the number of dissertations within SCM- and/or logistic-related areas in the period from 1999 to 2004 when compared to the period covered by the 2001 study. But surprisingly, the count between 1999 and 2004 fell short of the overall levels of 1987–1991. A more interesting finding of the 2006 study was that the dissertations were more multifaceted due to the fact that they closely mirrored the cross-functional and boundary spanning nature of logistics; at the same time, their multifaceted nature made the classification task more difficult.

Another American study was conducted by Das and Handfield [ 8 ] wherein the authors investigated 117 PhD dissertations from the period 1987–1995 in order to evaluate the intellectual health of the purchasing discipline. The study was an extension of a previous research on purchasing dissertations conducted by Williams [ 39 ] to identify the key focus areas of research in the prior decade. In this study, Williams concluded that the key focus areas covered were supplier selection and development, information systems, organizational and measurement issues, negotiation and purchasing ethics.

The most recent review covering US dissertations was conducted by Nakhata et al. [ 25 ]. In this study, the authors reviewed 609 doctoral dissertations completed between 2005 and 2009. The number of identified dissertations in this study is significantly larger than the four reviews conducted by Stock and colleagues and clearly reflects a significant increase in colleges/universities graduating doctoral students within logistics- and supply chain-related areas. Nakhata et al. [ 25 ] also point out that a forthcoming retirement of academic “baby boomers” during the period 2005–2020 may explain the increase in the PhD production. The most prominent research methodologies employed by doctoral students in the study of Nakhata et al. [ 25 ] are modeling, simulation and empirical quantitative methods.

Two earlier studies of Nordic doctoral dissertations within logistics and SCM have been disseminated in academic journals. The first was developed by Gubi et al. [ 13 ], who reviewed 71 Nordic dissertations published between 1990 and 2001. Most of the dissertations were published as monographs with manufactures and carriers as the primary entity of analysis. The most recent Nordic contribution is by Zachariassen and Arlbjørn [ 41 ] wherein the authors analyze the development in Nordic doctoral research in logistics and SCM from the years 2002–2008. As opposed to Gubi et al. [ 13 ], Zachariassen and Arlbjørn [ 41 ] found more dissertations based on a collection of articles, which was reflective of a response to increase publication pressure. In contrast to the Gubi et al.’s [ 13 ] study, the primarily entity of analysis of most dissertations was the manufacturing companies. While prior reviews showed a focal company perspective, the review of Zachariassen and Arlbjørn [ 41 ] documented a shift toward an inter-organizational perspective covering dyadic and supply chain units of analysis. Additionally, according to Zachariassen and Arlbjørn [ 41 ], there has also been a decreased focus on the philosophy of science, since most dissertations were being published as collections of articles.

The method applied for identifying, collecting and reviewing the doctoral dissertations in this paper follows a three-step process. These steps are explained in the following subsections.

3.1 Identifying and collecting Nordic doctoral dissertations

The first step consisted of sending e-mails to contact persons at different research institutions within the Nordic countries (i.e., Denmark, Finland, Iceland, Norway and Sweden) as outlined in [ 41 ]. Based on this e-mail contact, the list was further modified (e.g., adding University of Vaasa in Finland and Linnaeus University and Örebro University School of Business in Sweden). The final list included 39 research institutions which are presented in “Appendix 1.” A contact person at each of the 39 research institution was identified and was contacted by e-mail. The e-mail provided a clear statement of the research project and requested the list of completed doctoral dissertations within logistics and SCM within the analysis period. This process provided an initial list of 120 dissertations. Majority of these dissertations were accessible in electronic form (we either received them by e-mail or downloaded them from the corresponding institution’s Web site). The rest of the dissertations were available in hard copy form.

3.2 Validating the initial list of doctoral dissertations

The second step was concerned with the validation of the identified dissertations by senior researchers from each of the Nordic countries. This step was completed by e-mailing the initial list to these senior researchers and by attending the 27th annual NOFOMA conference in June 2015 at Molde University College. This process resulted in the inclusion of an additional 41 dissertations, thereby increasing the total count to 161.

3.3 Reviewing the received dissertations

In the third step, a detailed review of the 161 dissertations took place. During this process, three dissertations were excluded since they were judged as not being within the scope of the present analysis. Out of this net list of 158, it was possible to conduct reviews of 150 dissertations. As mentioned earlier, we were unable to retrieve eight dissertations as well as there was no response from the authors when we e-mailed them requesting for the copy of their dissertation. A complete list of the dissertations is included in “Appendix 2.” The detailed review took place against a review framework as described in [ 13 , 41 ]. Our analysis covered additional review elements as the dissertations were mostly based on a collection of articles. These elements were: (1) number of articles, (2) type of article (journal publication, book chapter, conference paper, working paper or unpublished paper), (3) year of publication, (4) ranking of the journal, (5) number of authors on each article and (6) the doctoral candidate’s author number for the specific article.

3.4 Limitations

This dissertation review has some limitations that are worthwhile to mention. First, even though the gross list of dissertations was reviewed and validated by senior researchers within the Nordic countries, there is a possibility that some dissertations were not identified. Second, reviewer subjectivity could not be completely eliminated in the review of the 150 dissertations. However, in order to minimize subjectivity, an aligned interpretation of the review elements and their outcome was obtained by a common review of three different types of dissertations (one monograph and two article-based dissertations). Third, the list of dissertations that was composed and reviewed stems from the NOFOMA research community. Obviously, other Nordic researchers may produce doctoral dissertations that deal with topics under the scope of this review, but is outside the NOFOMA radar (e.g., researchers belonging to European Decision Sciences Institute (EDSI), European Logistics Association (ELA), European Operations Management (EurOMA), International Purchasing and Supply Education and Research Association (IPSERA) or Logistics Research Network (LRN) or Rencontres Internationales de Recherche en Logistique (RIRL) (International Research Conference on Logistics and Supply Chain Management). This study can make observations only based on the dissertations reviewed under the NOFOMA umbrella. Fourth, since the contact persons were not provided with a definition of logistics and SCM, they might have excluded some dissertation that could have fallen within the scope of this analysis. Moreover, the senior researchers whom we e-mailed for dissertations might not be from the department of logistics and SCM. Therefore, including definitions for logistics and SCM will have no impact.

This section is concerned with specific analyses of the 150 reviewed doctoral dissertations. For comparative purposes, the data from the present review are portrayed and analyzed with the categories that are similar to those used by Gubi et al. [ 13 ] and Zachariassen and Arlbjørn [ 41 ]. The results are displayed in tables and are followed with appropriate comments and interpretations.

4.1 Number and type of dissertations finalized in the period 2009–2014

Table  1 contains the PhD dissertations divided by country, year of publication and type of dissertation (monograph vs. a collection of articles). Compared with the earlier studies, these new figures show some interesting developments. First, the number of finalized dissertations in the period 2009–2014 is 158, which represents an average of 26 dissertations per year. Compared with averages numbers of 10 (from the period 2002–2008) and 6.25 (from the period 1990–2001), this shows that there has been a strong increase in PhD production in this research area. A similar pattern is identified by Nakhata et al. [ 25 ] in their study of doctoral dissertations published by Dissertation Abstracts International in the period of 2005 and 2009. They explain that one reason for such an increase might be an increased level of retiring academicians toward 2020 which creates a stronger market for Assistant Professors. Another explanation could be that there is a drive from the governments to boost the number of annual PhD production in order to support national social, economic and environmental well-being as well as to address major global challenges [ 12 ]. The majority of the Nordic logistics and SCM PhDs come from the Finnish, Norwegian and Swedish research environments. In Denmark, the production is stable with 17 dissertations in the period of 2009–2014. Iceland has reported their first PhD in this period of analysis. Twenty-five Nordic research institutions have produced within logistics and SCM in the period 2009–2014 (see “Appendix 2”).

Another interesting finding in the current review is the increase in the share of dissertations that are based on a collection of articles. As given in Table  1 , 92 out of the 150 dissertations (61 %) are based on a collection of articles. Thus, there is a much higher focus on the craft to write academic articles when compared to the share of article-based dissertations in previous periods (29 % in the period 2002–2008 and 21 % in the period 1990–2001). This trend supports the predictions previously made by Zachariassen and Arlbjørn [ 41 ]. One plausible explanation for this development might be an increased amount of public and private resource allocation to research environments based on publications in internationally recognized peer-reviewed journals as well as measures such as impact indicators and H-index (see, e.g., [ 27 ]).

4.2 Primary entity of analysis

In Table  2 , all 150 dissertations are classified according to their entity of analysis; the classifications are also compared to previous results reported in [ 13 , 14 ]. The study of the primary entity of analysis in the dissertations shows strong differences. First, the category others has increased to about one-third of the dissertations in the last reported period. This group consists of a variety of dissertations without a specific supply chain actors’ perspective—such as fresh fish supply chains [ 26 ] and healthcare logistics [ 17 ]. Second, in absolute numbers, the manufacturer as the primary entity of analysis has increased when compared to the previous studies; but, if we measure the number as a percentage of the reviewed dissertations, there is a fall from 57 % in the dissertations from 2002 to 2008 to 33 % in the recent study.

Thus, it shows the more classical actors such as wholesalers, retailers and inventory hotels have obtained lesser research focus. Additionally, a remarkably low number of dissertations have focused on retail SCM within the Nordic countries. This is intriguing given the fact that the retail sector is well known for supply chain innovations such as quick response systems, efficient consumer response, distribution centers, reverse logistics, as well as collaborative planning, forecasting and replenishment [ 10 ].

4.3 Level of analysis arranged according to year of publication

Table  3 shows the analysis of the dissertations level of analysis arranged by the year of publication.

An interesting development evidenced in the above table is an increased focus on functional themes within dissertations (in the present analysis, this is about 26 % of the dissertations compared with 11 and 10 % in previous analyses). This development is primarily driven by Finnish dissertations and can indicate an emphasis on building stronger knowledge bases in certain sub-disciplines along the supply chain. Examples of such dissertations are [ 18 , 19 ]. Another interesting development is the reduced focus on firm-level analysis and a subsequent increased focus on the supply chain or the network as the level of analysis, with the network level experiencing the highest increase. This increase is strongly evident within Swedish dissertations.

4.4 Research design, time frame and philosophy of science

Table  4 shows the classification of the dissertations according to research design, time frame and philosophy of science. The recent analysis reveals a decrease in share of dissertations that are purely theoretical in nature. Also, the share of dissertations founded on purely qualitative methods has also decreased compared with dissertations published in the period 2002–2008. The drop in share of these two categories has attributed to increases in shares of dissertations based on quantitative methods and on triangulations of qualitative and quantitative research methods. The increase in quantitative research methods can be explained by the increased pressure to publish, thereby favoring quantitative methods over time-consuming qualitative studies (see, e.g., [ 21 ]). While quantitative data collection can be automated, it is not possible for qualitative data collection. Qualitative data collection is, in general, more time-consuming and expensive when compared to quantitative research studies. Thus, it might be more cost-effective to slice one questionnaire survey into a number of articles than doing the same number of articles based on qualitative methodologies. This trend will undoubtedly improve numerical performance metrics. At the same time, this trend need not necessarily deliver new knowledge that could move the discipline significantly forward. Particularly, quantitative surveys are exposed to the phenomenon of “salami-slicing” where the data from a particular project are disseminated in a number of articles that in fact are “sliced” so thinly that there might be overlap of the papers (e.g., text recycling in literature review sections, key findings and discussions ([ 9 , 16 ]). We refer to the Committee on Publication Ethics (COPE) [ 7 ] for a discussion on different forms of text recycling.

Table  4 also shows an increased share of dissertations that apply a longitudinal perspective. Additionally, the share of snapshot time frames has decreased and the share of the category time frame not specified has increased. Examples of dissertations without any specific time frame are by (1) Mortensen [ 23 ], who investigate the concept of attraction and explain its role in initiation and development of buyer–seller relations, and (2) Tynjälä [ 35 ], who conceptually examines the methods and tools for supply chain decision making during new product development. A final remarkable finding from Table  4 is the continued decline of dissertations containing philosophy of science issues. The present analysis identifies 73 % of the dissertations not including such philosophical considerations in comparison with 71 and 45 % in the two previous periods of analysis. Twenty-nine percent of dissertations that are monographs do contain philosophy of science considerations, whereas 25 % have this content among the article-based dissertations. Zachariassen and Arlbjørn [ 41 ] provided four possible reasons for this decline: (1) There are no mandatory requirements for PhD students to attend philosophy of science courses, (2) article-based dissertations do not rely on philosophy of science argumentations to the same degree as the monographs that typically require more in-depth interaction of this issues and method considerations, (3) there is a lower prioritization of philosophy of science due to higher pressure from external funded projects that do not demand this theme, and (4) logistics and SCM are closely connected with industry that could lead to a perception that philosophy of science is less relevant. To this list, we add four more potential reasons. First, there are no requirements mentioned in Nordic countries’ ministerial orders granting degrees of PhD about unfolding philosophical of science perspectives. Second, few, if any, journals within logistics and SCM demand such discussions. Third, philosophy of science has disappeared from PhD candidates’ syllabi. Finally, only a few PhD advisors have the knowledge to join in such discussions with their PhD students; therefore, they do not send signals for offering such courses. Overall, this development is inexpedient if the discipline really has to move toward theory development [ 6 , 30 ].

4.5 Dissertations distributed according to topic groups and country of origin

Table  5 displays the dissertations according to topic groups based on a title analysis of the 158 identified dissertations. For comparison reasons, the topic groups identified in previous studies were used [ 13 , 41 ] and further supplemented with two new groups risk management and humanitarian logistics. The table shows a continued decline in the share of dissertations related to system design/structure/effectiveness, organizational development/competencies and material handling. In contrast, topics related to system integration/integration enablers and transport/transport systems have obtained increased awareness. The increase in these topics is primarily based on Swedish and Norwegian dissertations.

Additionally, while the study by [ 41 ] found that topics related to humanitarian logistics and risk management were absent, the present review of dissertations has remedied this with dissertations on this topic from Finland and Sweden.

4.6 Article-based dissertations

The study reported in this paper reveals an increased amount of article-based dissertations. This development confirms the expectations raised by Zachariassen and Arlbjørn [ 41 ]. However, an article-based dissertation can be composed in different ways—e.g., with respect to requirements regarding the type of articles, number of articles, co-author permission and the author order position among the co-authors in an article. The ministerial orders granting the degree of PhDs in the different countries do not provide any guidance and requirements concerning the format of a PhD. This opens up for various interpretations of the required workload to earn the PhD degree. Therefore, the increase in more article-based dissertations requires that we study how the practice of these types of dissertations is unfolded in the Nordic countries. This section takes a closer look at the 92 article-based dissertations and develops a measure to differentiate the various types of dissertations. The subsequent subsection proposes a measure for article-based dissertation; this measure is subsequently used in analyzing the identified Nordic article-based dissertations.

4.6.1 Measure for dissertation score

In order to develop a measure for an average article-based dissertation, we first need to recognize the fact that a specific article that is part of the dissertation can take different forms. Hence, the first element in this proposal for a dissertation measure is to differentiate between the different types of contributions that are part of the article-based dissertation and then to allocate different scores for the different types. The present analysis distinguishes between five different types of articles with specific scores as follows:

Peer-reviewed journal articles, score: 1

Peer-reviewed articles in form of book chapters (e.g., in an anthology), score: 0.8

Peer-reviewed conference articles, score: 0.8

Working papers, score: 0.5

Non-published papers, score: 0.5

The differences in scores are used to reflect different perceptions of workload as well as quality requirements. Thus, a peer-reviewed journal article obtains the highest score of 1 point followed by book chapters and conferences papers with scores of 0.8, and working papers and non-published manuscripts of 0.5 points.

The next step in developing a dissertation score is to propose a measure that takes into account the number of authors as well as the order of the authors. Thus, a sole authored paper by a PhD candidate counts more than a co-authored paper. And, in the present measure, a first-order author position counts more than a lower author position. Table  6 proposes scores for authorship indicators evaluating each of the articles that take into consideration various numbers of authors and author order positions.

Based on the above proposals of different types of articles and measures for different authorship indicators, we can now develop an overall dissertation score based on Formula 1:

Formula 1: overall dissertation score

where S  = overall dissertation score, T  = type of article and authorship factor = number of authors (NoA) * author order position (AOP).

The overall dissertation score is composed of multiplying the scores of the individual articles by the authorship factor. The basic idea is that the highest score per article of 1 point is reduced based on the lower the level of the perceived status of various channels (e.g., journal rankings; journal articles versus book chapters; conference articles versus journal articles/book chapters) and the number of co-authors as well as the author order the PhD student has for the given article. A conference paper that is included in an article-based dissertation, which have been through a double-blind review process (e.g., at a NOFOMA, LRN or a EurOMA conference), is valued 0.8 compared with an article that is published in a peer-reviewed journal. Thus, a conference article is considered as less mature when compared to an article that has been through perhaps several revisions in a journal before acceptance. However, we should avoid with the generalization of the different channels. The Danish Bibliometric Research Indicator, for example, value accepted conference articles as much as some journal papers, if they are accepted to be presented at some conferences (e.g., EURAM and AOM) [ 36 ]. Also, contributions to books are valued differently according to which publisher the work is published with [ 37 ].

The dissertation score is a measure for the PhD dissertation at hand—and thus, the status of it when it was judged and passed. Several article-based dissertations contain non-published papers, working papers and conference articles that find its way to peer-reviewed journals after the degree of PhD has been awarded and further workload is invested in those articles. Other articles of this nature never end in publications for various reasons. Thus, the status of the papers after the PhD evaluation is not included in the dissertation score presented in this article.

An article-based dissertation is evaluated not only on the enclosed articles, but also on the text (the frame) that bind the articles together. Also, herein there seems to be different practices—e.g., the scope and depths on positioning the thesis against extant research; the level and scope of methodological and philosophy of science discussions (see, e.g., [ 3 ]); independent literature reviews as well as discussions on the “red line” between the included articles.

The overall purpose with the dissertation score is to propose a measure to be used for discussing the scope and content-type of a PhD dissertation. What is enough? And how much of a dissertation can be co-authored with others? Is one dissertation better than another because it includes articles that are published? It is our experience that there are differences in what is needed in an article-based dissertation both within a department at a research institution and between research institutions. The present dissertation score can help in discussing what is needed and also in developing department guidelines.

The proposed overall dissertation score formula is not without limitations. First, the division of types of articles and their scores is subjective. The peer-reviewed journal category, for example, can be further divided into different scores by following specific journal ranking lists. Second, the scores for various numbers of authors and their author order position in the proposed authorship factor calculation are also subjective and can be altered. The order of authors of a paper does not necessarily display the true workload of different authors. The order of authors can be organized using different principles such as a simple alphabetical listing, organized after seniority (experience); listing the person first who got the idea to the article as the first author; or listing PhD students first because they need the credit more than their senior co-authors. Third, the dissertation score does not include a time perspective (i.e., the length of the PhD program)—a higher score can be obtained over a 5-year period when compared to a 3-year period. Fourth, the dissertation score does not take into consideration the extent of thesis frame (the text accompanying the articles such as scoping, positioning, methods, philosophy of science, contribution and implications). Fifth, the score of author order position decreases based on the position; this may not reflect the actual work load. In summary, as with any measures in general, this overall dissertation score also has its own shortcomings and these are important to be considered to ensure the practical use of the score. However, in spite of the sometime magical status of numbers—we should remember that “numbers are just number” and that they can be used to jump start discussions on how to compose an article-based dissertation.

4.6.2 Dissertation scores

This section provides an analysis of the 92 article-based dissertations using the dissertation score developed in the above subsection. This number is divided among 12 Danish, 27 Finnish, 37 Swedish and 16 Norwegian dissertations. As given in Table  7 , the dissertations vary in the number of included articles spanning from three to eight articles. The majority of the dissertations are composed of four to six articles. The average number of articles counts to 4.84. Table  7 also shows that the average dissertation score increases from 1.53 with three articles to 5.38 with eight articles. This is not surprising given the design of the formula.

Furthermore, Table  7 shows that including journal articles is a well-established practice among the reviewed dissertations. The share of journal articles counts 54 % among dissertations with four articles (71/132); 62 % among dissertations with five articles (80/130); and 69 % among dissertations with six articles (99/144). After journal papers, conference papers and non-published papers are the second most typical types that are included in article-based dissertations. Finally, Table  7 shows that including reviewed books chapters is not that prevalent among the dissertations reviewed.

This review also shows that there are more PhD candidates at Chalmers University of Technology with highest number of contributions at 18 dissertations followed by Molde University College with 16 dissertations and Lund University with 11 dissertations (see Fig.  1 ). In all, the 92 article-based dissertations contain 446 articles divided into the five types discussed in Sect.  4.6.1 . Out of this, 266 are peer-reviewed journal articles of which 68 are from Chalmers University of Technology; 39 are from Molde University College; and 39 are from Lappeenranta University of Technology. In total, 83 articles are included as conference papers; 64 are included as non-published papers; 27 are included as working papers; and only six articles take the form of book chapters.

Average dissertation scores divided by research institution. AU Aalto University, ASB/AU Aarhus School of Business/Aarhus University, CUT Chalmers University of Technology, HSE Hanken School of Economics, JIBS Jönköping International Business School, KI Karolinska Institutet, LiU Linköping University, LU Lund University, LUT Lappeenranta University of Technology, MUC Molde University College, SU Stockholm University, TSE Turku School of Economics, TUD Technical University Denmark, UO University of Oulu, UV University of Vaasa, USD University of Southern Denmark

Figure  1 demonstrates a relatively high variety among the dissertations across the different research institutions with respect to the average institutional dissertations (ranging from 1.47, 2.47, 2.76, 2.96, 3.03, 3.12, 3.22, 3.25, 3.45, 3.83, 3.87, 3.93, 4.11, 4.22, 4.28, 5.02). Four of the six dissertations composed of three articles (see Table  7 ) are Danish dissertations from Aarhus School of Business/Aarhus University. In contrast, eight out of the 24 dissertations holding six articles are composed of 4–6 peer-reviewed journal articles. The dissertation score is here suggested as an instrument that can be used in discussions on what is required to earn the degree of PhD at the specific research institutions and, through benchmarks, facilitate alignment processes if needed. With the limitations in mind, a PhD student can discuss with her or his advisor(s) as of what type of articles are required; whether co-authored articles with advisors or other senior researchers or PhD students can be included; and how a PhD student documents her or his contribution in each article if they are co-authored. The dissertation score can also stimulate further discussions on what should be included in the binder of the dissertation—e.g., prioritizes theme to be discussed in the binder instead of adding another article.

4.7 Potential topics for inclusion in the dissertations

The review process of the 150 dissertations reveals that five research areas seem to be under-prioritized among Nordic scholars within logistics and SCM. The topics are as follows (not prioritized):

Cloud technology Although there is a focus on maximizing the effectiveness of shared resources [ 5 ], the increased availability of high-capacity network, low-cost computers and storage devices as well as the widespread adoption of hardware virtualization, service-oriented architecture, and autonomic and utility computing have led to a growth in the use of cloud technology. In spite of its increased importance, it is distinct that this subject has not received more attention in the dissertations reviewed.

Globalization of SC As mentioned previously, this topic was still largely ignored in the dissertation reviewed. With the natural outcome of expanding growing market and sustaining competitive advantage, companies have to make key decisions about managing costs and complexity through globalized supply chain (see, e.g., [ 11 ]).

Supply chain innovation (SCI) The discipline of innovations has branched out into the supply chain context and should be regarded as an important topic. While firms are applying their assets, operating resources and capabilities to develop new ways of improve performance, they cannot ignore the importance of their supply chain partners in enabling product and process innovations (see, e.g., [ 1 ]). Accordingly, more attention needs to be paid to this topic.

Security This topic was also mentioned in the previous study by Zachariassen and Arlbjørn [ 41 ]. Yet, this topic has only received limited attention among the 112 dissertations published between 2009 and 2014. Security is increasingly becoming a major concern to both private and public sector organizations. Security searches for cooperative arrangements between businesses as well as identifies risks before the goods move. It is also concerned with controlling theft and reducing illegal import and export of stolen goods. There are many areas of research within the topic of security from formal aspects to empirical research (see, e.g., [ 4 , 40 ]). Hence, it is essential that researchers start focusing on the different aspects of this topic in the future. This is one of the key topics of research within supply chain now as well as in the distant future.

Big data This is currently drowning the world. The huge amount of data is an invaluable asset in the context of supply chains. The quality of the evidence extracted significantly benefits from the availability of broad datasets. On the one hand, extensive vision is more promising when extra data are available. And, on the other hand, it is a big challenge. The current approach is not appropriate to handle large data, and therefore, there is a need for new solutions to handle large datasets. This research field is new and rapidly evolving [ 38 ], and there is also a lead-time issue before we see the first dissertations within this area. As a result, any initial effort taken will be a strong contribution from both experimental and theoretical perspective (see, e.g., [ 15 ]).

5 Conclusion

This paper has set out to analyze the development of Nordic doctoral dissertations in logistics and SCM from the years 2009–2014. The paper identified 158 dissertations relevant for review; out of this, 150 dissertations were reviewed in depth based on different criteria. Compared with previous studies, this research found several important developments in Nordic doctoral research. First, there has been an increase in the average annual number of finalized dissertations when compared to previous Nordic studies. The results predominantly show the remarkable increase in dissertations between 2009 and 2014 (158 dissertations) wherein Sweden ranks highest followed by Finland, Norway, Denmark and Iceland, respectively. Second, there has been a decrease in dissertations that focus on classical entities of analysis such as carriers, wholesalers, retailers and inventories. Therefore, it is clear that the PhD dissertation’s focal point is still more on manufacturing firms (50/150) rather than on other entities. Third, there has been an increase in functional subject areas of logistics and SCM and the supply chain/network level. Fourth, the number of dissertations containing philosophy of science discussions is continuing to decline. As mentioned earlier, there is a significant increase in article-based dissertations and these dissertations do not adopt philosophy of science; as a result, there is an extreme decrease (110/150). Finally, there is clear shift toward disseminating doctoral research as an article-based dissertation (2009–2014: 92/150; 2002–2008: 26/70; 1990–2001: 15/71, respectively). However, this piece of research has demonstrated that the content of the Nordic article-based dissertations varies along dimensions such as types of articles included, the number of articles included and the number of co-authors at the papers. A dissertation score has been suggested as a measure for initiating discussions about such dissertations at a single research institution and as a benchmark between different institutions. As discussed earlier, such a score is not without limitations and must not stand alone. Therefore, the next logical step might be to discuss how far should we go with the number and the type of contributions. What is enough in order to earn a PhD degree? The content of this paper can be used to match the expectations of PhD students and their supervisors so as to find the right path to learn the craft of conducting and disseminating logistics and SCM research.

Arlbjørn JS, de Haas H, Munksgaard KB (2011) Exploring supply chain innovation. Logist Res 3(1):3–18

Article   Google Scholar  

Arlbjørn JS, Freytag PV, Damgaard T (2008) The beauty of measurement. Eur Bus Rev 20(2):112–127

Arlbjørn JS, Halldórsson Á (2002) Logistics knowledge creation: reflections on content, context and processes. Int J Phys Distr Log 32(1):22–40

Blackhurst J, Ekwall D, Martens BJ (2015) Special issue on supply chain security. Int J Phys Distr Log 45(7). doi: 10.1108/IJPDLM-04-2015-0104

Google Scholar  

Cegielski CG, Allison Jones-Farmer L, Wu Y, Hazen BT (2012) Adoption of cloud computing technologies in supply chains: an organizational information processing theory approach. Int J Logist Manag 23(2):184–211

Choi TY, Wacker JG (2011) Theory building in the OM/SCM field: pointing to the future by looking at the past. Supply Chain Manag Int J 47(2):8–11

Committee on Publication Ethics (COPE) (2014) How to deal with text recycling. http://publicationethics.org/files/BioMed%20Central_text_recycling_editorial_guidelines_1.pdf . Accessed 09 Jan 2016

Das A, Handfield RB (1997) A meta-analysis of doctoral dissertations in purchasing. J Oper Manag 15(2):101–121

Dyrud MA (2015) Ethics and text recycling. In: 122nd ASEE annual conference & exposition, 14–17 June 2015, Seattle, paper ID#11150

Fernie J, Sparks L, McKinnon AC (2010) Retail logistics in the UK: past, present and future. Int J Retail Distr Manag 38(11/12):894–914

Gereffi G, Lee J (2012) Why the world suddenly cares about global supply chains. Supply Chain Manag Int J 48(3):24–32

Group of Eight (2013) The changing. In: Ph.D.: discussion paper. O’Conner ACT Australia. https://go8.edu.au/sites/default/files/docs/the-changing-phd_final.pdf . Accessed 01 March 2015

Gubi E, Stentoft Arlbjørn J, Johansen J (2003) Doctoral dissertations in logistics and supply chain management: a review of Scandinavian contributions from 1990 to 2001. Int J Phys Distr Log 33(10):854–885

Halldórsson Á, Larson PD, Poist RF (2008) Supply chain management: a comparison of Scandinavian and American perspectives. Int J Phys Distr Log 38(2):126–142

Huang YY, Handfield RB (2015) Measuring the benefits of ERP on supply management maturity model: a “big data” method. Int J Oper Prod Man 35(1):2–25

Hughes M (2014) Editorial: reflecting on ethical questions and peer reviewing. Aust Soc Work 67(4):463–466

Jørgensen P (2013) Technology in health care logistics. Dissertation, Technical University of Denmark

Karjalainen K (2009) Challenges of purchasing centralization—empirical evidence from public procurement. Dissertation, Aalto University School of Business

Karrus KE (2011) Policy variants for coordinating supply chain inventory replenishments. Dissertation, Aalto University School of Business

Macdonald S, Kam J (2007) Ring a Ring o’Roses: quality journals and gamesmanship in management studies. J Manag Stud 44(4):640–655

McKinnon AC (2013) Starry-eyed: journal rankings and the future of logistics research. Int J Phys Distr Log 43(1):6–17

Menachof DA, Gibson BJ, Hanna JB, Whiteing AE (2009) An analysis of the value of supply chain management periodicals. Int J Phys Distr Log 39(2):145–165

Mortensen, MH (2011) Towards understanding attractiveness in industrial relationships. Dissertation, University of Southern Denmark

Myklebust, JP (2013). Sharp rise in foreign. In: Ph.D. enrolments in Scandinavia. University World News 18

Nakhata C, Stock JR, Texiera TB (2013) Doctoral dissertations in logistics and supply chain-related areas: 2005–2009. Logist Res 6(4):119–131

Nga, MTT (2010) Enhancing quality management of fresh fish supply chains through improved logistics and ensured traceability. Dissertation, University of Iceland

Rao S, Iyengar D, Goldsby JT (2013) On the measurement and benchmarking of research impact among active logistics scholars. Int J Phys Distr Log 43(10):814–832

Stock JR (1987) A compendium of doctoral research in logistics: 1970–1986. J Bus Logist 8(2):123–136

Stock JR (1988) A compendium of doctoral research in logistics: 1970–1986. J Bus Logist 9(1):125–233

Stock JR (1997) Applying theories from other disciplines to logistics. Int J Phys Distr Log 27(9/10):515–539

Stock JR (2001) Doctoral research in logistics and logistics-related areas 1992–1998. J Bus Logist 22(1):125–256

Stock JR, Boyer SL (2009) Developing a consensus definition of supply chain management: a qualitative study. Int J Phys Distr Log 39(8):690–711

Stock JR, Broadus CJ (2006) Doctoral research in supply chain management and/or logistics-related areas: 1999–2004. J Bus Logist 27(1):139–151

Stock JR, Luhrsen DA (1993) Doctoral research in logistics-related areas 1987–1991. J Bus Logist 14(2):197–210

Tynjälä T (2011) An effective tool for supply chain decision support during new product development process. Dissertation, Aalto University School of Business

Undervisnings & Forsknings Ministeriet (Ministry of Teaching and Research) (UFM) (2015a) http://ufm.dk/forskning-og-innovation/statistik-og-analyser/den-bibliometriske-forskningsindikator/autoritetslister/list-of-series-18112015-xlsx.pdf . Accessed 31 Dec 2015

Undervisnings & Forsknings Ministeriet (Ministry of Teaching and Research) (UFM) (2015b) http://ufm.dk/forskning-og-innovation/statistik-og-analyser/den-bibliometriske-forskningsindikator/autoritetslister/autoritetslisten-for-forlag-2015-november-xlsx.pdf . Accessed 31 Dec 2015

Waller M, Fawcett S (2013) Data science, predictive analytics, and big data: a revolution that will transform supply chain design and management. J Bus Logist 34(2):77–84

Williams AJ (1986) Doctoral research in purchasing and materials management: an assessment. J Purch Mater Manage 22(1):13–16

Williams Z, Lueg JE, Taylor RD, Cook RL (2009) Why all the changes? An institutional theory approach to exploring the drivers of supply chain security (SCS). Int J Phys Distr Log 39(7):595–618

Zachariassen F, Arlbjørn JS (2010) Doctoral dissertations in logistics and supply chain management: a review of Nordic contributions from 2002 to 2008. Int J Phys Distr Log 40(4):332–352

Download references

Author information

Authors and affiliations.

Department of Entrepreneurship and Relationship Management, University of Southern Denmark, Kolding, Denmark

Christopher Rajkumar, Lone Kavin, Xue Luo & Jan Stentoft

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Jan Stentoft .

Appendix 1: Research institutions contacted

Aalborg University

Aarhus School of Business/Aarhus University

Copenhagen Business School

Danish Technical University/Technical University of Denmark

Roskilde University

University of Southern Denmark

Aalto University

Åbo Akademi University

Hanken School of Economic

Helsinki University

Lappeenranta University of Technology

National Defence University

Swedish School of Economics and Business Administration

Tampere University of Technology

Technical Research Center of Finland

Turku School of Economics

University of Oulu Business School

University of Vaasa

University of Iceland

BI Norwegian School of Management

Institute of Transport Economics

Molde University College

Norwegian School of Economics and Business Administration

Norwegian University of Science and Technology

SINTEF Industrial Management

University of Oslo Business School

University of Nordland

Chalmers University of Technology

Gothenburg University

Jönköping International Business School

Karolinska Institute Department of Public Health Sciences

Linköping University

Linnæus University

Lund University

Örebro University

Stockholm School of Economics

Stockholm University

Swedish National Road and Transport Research Institute

University College of Borås

Appendix 2: Doctoral dissertations identified

2.1 danish dissertations.

Aarhus School of Business/Aarhus University:

Abginehchi, S. (2012), Essays on Inventory Control in Presence of Multiple Sourcing , Aarhus.

Bach, L. (2014), Routing and Scheduling Problems — Optimization using Exact and Heuristic Methods , Aarhus.

Bendre, A.B. (2010), Numerical Studies of Single - stage, Single - item Inventory Systems with Lost Sales , Aarhus.

Bodnar, P. (2013), Essays on Warehouse Operations , Aarhus.

Christensen, T.R.L. (2013), Network Design Problems with Piecewise Linear Cost Functions , Aarhus.

Du, B. (2011), Essays on Advance Demand Information, Prioritization and Real Options in Inventory Management, Aarhus.

Hanghøj, A. (2014), Papers in Purchasing and Supply Management: A Capability - Based Perspective , Aarhus.

Kjeldsen, K.H. (2012), Routing and Scheduling in Liner Shipping , Aarhus.

Copenhagen Business School:

Andreasen, P.H. (2012), The Dynamics of Procurement Management — A Complexity Approach , Frederiksberg.

Kinra, A. (2009), Supply Chain (Logistics) Environmental Complexity , Frederiksberg.

Nøkkentved, C. (2009), Enabling Supply Networks with Collaborative Information Infrastructures: An Empirical Investigation of Business Model Innovation in Supplier Relationship Management , Frederiksberg.

Yu, L.A. (2012), Fabricating an S&OP Process: Circulating References and Matters of Concern , Frederiksberg.

University of Southern Denmark:

Jensen, J.K. (2013), Development of Environmentally Sustainable Food Supply Chains , Kolding.

Mikkelsen, O.S. (2011), Strategic Sourcing in a Global Organizational Context , Kolding.

Mortensen, M.H. (2011), Towards Understanding Attractiveness in Industrial Relationships , Kolding.

Zachariassen, F. (2011), Supply Chain Management and Critical Theory: Meta - Theoretical, Disciplinary and Practical Contributions to the Supply Chain Management Discipline Based on Insights from the Management Accounting Discipline , Kolding.

Technical University of Denmark:

Jørgensen, P. (2013), Technology in Health Care Logistics , Lyngby.

2.2 Finnish dissertations

Aalto University School of Business:

Aaltonen, K. (2010), Stakeholder Management in International Projects , Finland.

Ahola, T. (2009), Efficiency in Project Networks: The Role of Inter - Organizational Relationships in Project Implementation , Finland.

Ala-Risku, T. (2009), Installed Base Information: Ensuring Customer Value and Profitability after the Sale , Finland.

Groop, J. (2012), Theory of Constraints in Field Service: Factors Limiting Productivity in Home Care Operations , Finland.

Helkiö, P. (2013), D eveloping Explorative and Exploitative Strategic Intentions — Towards a Practice Theory of Operations Strategy , Finland.

Hinkka, V. (2013), Implementation of RFID Tracking across the Entire Supply Chain , Finland.

Karjalainen, K. (2009), Challenges of Purchasing Centralization — Empirical Evidence from Public Procurement , Finland.

Karrus, K. (2011), Policy Variants for Coordinating Supply Chain Inventory Replenishments , Finland.

Kauremaa, J. (2010), Studies on the Utilization of Electronic Trading Systems in Supply Chain Management , Finland.

Nieminen, S. (2011), Supplier Relational Effort in the Buyer – Supplier Relationship , Finland.

Peltokorpi, A. (2010), Improving Efficiency in Surgical Services: A Production Planning and Control Approach , Finland.

Porkka, P. (2010), Capacitated Timing of Mobile and Flexible Service Resources , Finland.

Rajahonka, M. (2013), Towards Service Modularity — Service and Business Model Development , Finland.

Ristola, P. (2012), Impact of Waste - to - Energy on the Demand and Supply Relationships of Recycled Fibre , Finland.

Seppälä, T. (2014), Contemporary Determinants and Geographical Economy of Added Value, Cost of Inputs, and Profits in Global Supply Chains: An Empirical Analysis , Finland.

Tenhiälä, A. (2009), Contingency Theories of Order Management, Capacity Planning, and Exception Processing in Complex Manufacturing Environments , Finland.

Torkki, P. (2012), Best Practice Processes — What are the Reasons for Differences in Productivity between Surgery Units , Finland. NOT reviewed

Turunen, T. (2013), Organizing Service Operations in Manufacturing , Finland.

Tynjälä, T. (2011 ) , An Effective Tool for Supply Chain Decision Support During New Product Development Process , Finland.

Viitamo, E. (2012), Productivity as a Competitive Edge of a Service Firm: Theoretical Analysis and a Case Study of the Finnish Banking Industry , Finland.

Voutilainen, J. (2014), Factory Positioning in an Unpredictable Environment: A Managerial View of Manufacturing Strategy Formation , Finland.

Åbo Akademi University:

Nyholm, M. (2011), Activation of Supply Relationships , Turku.

Hanken School of Economic:

Antai, I. (2011), Operationalizing Supply Chain vs. Supply Chain Completion , Finland.

Haavisto, I. (2014), Performance in Humanitarian Supply Chains , Finland.

Harilainen, H. (2014), Managing Supplier Sustainability Risk , Finland.

Tomasini Ponce, R. (2012), Informal Learning Framework for Secondment: Logistics Lessons from Disaster Relief Operations , Finland.

Vainionpää, M. (2010), Tiering Effects in Third - party Logistics: A First - Tier Buyer Perspective , Finland.

University of Oulu Business School:

Juntunen, J. (2010): Logistics Outsourcing for Economies in Business Network , Finland

Lappeenranta University of Technology — Industrial Engineering and Management:

Karppinen, H. (2014), Reframing the Relationship between Service Design and Operations: A Service Engineering Approach , Lappeenranta.

Kerkkänen, A. (2010), Improving Demand Forecasting Practices in the Industrial Context , Lappeenranta.

Laisi, M. (2013), Deregulation’s Impact on the Railway Freight Transport Sector’s Future in the Baltic Sea Region , Lappeenranta.

Lättilä, L. (2012), Improving Transportation and Warehousing Efficiency with Simulation - Based Decision Support Systems , Lappeenranta.

Niemi, P. (2009), Improving the Effectiveness of Supply Chain Development Work — An Expert Role Perspective , Lappeenranta.

Pekkanen, P. (2011), Delay Reduction in Courts of Justice — Possibilities and Challenges of Process Improvement in Professional Public Organizations , Lappeenranta.

Salmela, E. (2014), Kysyntä - Toimitusketjun Synkronointi Epävarman Kysynnän ja Tarjonnan Toimintaympäristössä , Lappeenranta. NOT reviewed.

Saranen, J. (2009), Enhancing the Efficiency of Freight Transport by Using Simulation , Lappeenranta.

Lappeenranta University of Technology — School of Business:

Kähkönen, A. (2010), The Role of Power Relations in Strategic Supply Management — A Value Net Approach , Lappeenranta.

Lintukangas Annaliisa, K. (2009), Supplier Relationship Management Capability in the Firm’s Global Integration , Lappeenranta.

Vilko, J. (2012), Approaches to Supply Chain Risk Management: Identification, Analysis and Control , Lappeenranta.

Turku School of Economic:

Koskinen, P. (2009), Supply Chain Challenges and Strategies of a Global Paper Manufacturing Company , Turku.

Lorentz, H. (2009), Contextual Supply Chain Constraints in Emerging Markets — Exploring the Implications for Foreign Firms , Turku.

Rantasila, K. (2013), Measuring Logistics Costs. Designing a Generic Model for Assessing Macro Logistics Costs in a Global Context with Empirical Evidence from the Manufacturing and Trading Industries , Turku.

Solakivi, T. (2014), The Connection between Supply Chain Practices and Firm Performance — Evidence from Multiple Surveys and Financial Reporting Data , Turku.

Tampere University of Technology:

Jokinen, J. (2010), Multi - Agent Control of Reconfigurable Pallet Transport Systems , Tampere. NOT reviewed

University of Vaasa:

Addo-Tenkorang, R. (2014), Conceptual Framework for Large - Scale Complex Engineering - Design & Delivery Processes. A Case of Enterprise SCM Network Activities and Analysis , Finland.

Kärki, P. (2012), The Impact of Customer Order Lead Time - Based Decisions on the Firm’s Ability to Make Money — Case Study: Build to Order Manufacturing of Electrical Equipment and Appliances , Finland.

Moilanen, V. (2011), Case study: Developing a Framework for Supply Network Management , Finland.

Nugroho Widhi, Y K. (2009), Structuring Postponement Strategies in the Supply Chain by Analytical Modeling , Finland.

2.3 Icelandic dissertations

University of Iceland — School of Health Sciences:

Nga, M. (2010), Enhancing Quality Management of Fresh Fish Supply Chains through Improved Logistics and Ensured Traceability , Reykjavik.

2.4 Norwegian dissertations

Norwegian University of Science and Technology:

Bai, Y. (2013), Reliability of International Freight Trains, An Exploratory Study Drawing on Three Mainstream Theories , Trondheim.

BI Norwegian School of Management:

Hatteland, C.J. (2010), Ports as Actors in Industrial Networks , Norway.

Bjørnstad, S. (2009), Shipshaped Kongsberg Industry and Innovations in Deepwater Technology, 1975 – 2000, Norway.

Hoholm, T. (2009), The Contrary Forces of Innovation - An Ethnography of Innovation Processes in the Food Industr, Norway.

Zhovtobryukh, Y (2014), The Role of Technology, Ownership and Origin in M&A Performance, Norway.

Molde University College:

Halse, L.L. (2014), Walking the Path of Change. Globalization of the Maritime Cluster in North West Norway , Norway.

Salema, G.L. (2014), The Antecedents of Supplier Logistics Performance: an Empirical Study of the Essential Medicines Supply in Tanzania, Norway.

Chaudhry, M.O. (2014), An Assessment of Linkages between Investment in Transport Infrastructure and Economic Development, Norway.

Søvde, N.E. (2014) Optimization of Terrain Transportation Problems in Forestry, Norway.

Iversen, H.P. (2013) Logististikkerfaringer i Psykiatri og Psykisk Helsearbeid: Om Forståelse, Organisering og Ledelsed av Relasjoner i en Profesjonell Organisasjon i Omstilling, Norway.

Bottolfsen, T. (2013) The Impact of Internal, Customer and Supplier Integration on Store Performance , Norway.

Schøyen, H. (2013) Identifying Efficiency Potentials in Maritime Logistics: Investigations from Container and Bulk Trades , Nowary.

Jin, J.Y. (2013) Cooperative Parallel Metaheuristics for Large Scale Vehicle Routing Problems, Norway.

Regmi, U.K. (2013) Essays on Air Transport Marketing and Economics , Norway.

Glavee-Geo, R. (2012) The Antecedents and Consequences of Supplier Satisfaction in Agro Commodity Value Chain: an Empirical Study of Smallholder Cocoa Growers of Ghana , Norway.

Lanquepin, G. (2012) Algorithms for Dynamic Pricing and Lot Sizing, Norway.

Qin, F.F. (2012) Essays on Efficient Operational Strategy of Urban Rail Transit, Norway.

Qian, F.B. (2012) Passenger Risk Minimization in Helicopter Transportation for the Offshore Petroleum Industry , Norwary.

Bø, O. (2012) Aspects of Production Tracking Systems in the Supply Network for Caught Seafood , Norway.

Yue, X. (2010) Competition and Cooperation: a Game theoretic Analysis on the Development of Norwegian Continental shelf, Norway.

Shyshou, A. (2010) Vessel Planning in Offshore Oil and Gas Operations , Norway.

Thapalia, B.K. (2010) Stochastic Single - commodity Network Design , Norway.

Bakhrankova, K. (2010) Production Planning in Continuous Process Industries: Theoretical and Optimization Issues, Norway.

Bhatta, B.P. (2009) Discrete Choice Analysis with Emphasis on Problems of Network - based Level of Service Attributes in Travel Demand Modeling , Norway.

Burki, U. (2009) Cross Cultural Effects on the Relational Governance of Buyer – Supplier Relationships: an Empirical Study of the Textile Exporting Firms of Pakistan , Norway.

Vaagen, H. (2009) Assortment Planning under Uncertainty, Norway.

Saeed, N. (2009) Competition and Cooperation among Container Terminals in Pakistan: with Emphasis on Game Theoretical Analysis, Norway.

2.5 Swedish dissertations

Chalmers University of Technology:

Almotairi, B. (2012), Integrated Logistics Platform the Context of the Port Relational Exchanges and Systematic Integration , Gothenburg.

Andersson, R. (2009), Supply Chain Resilience through Quality Management , Gothenburg.

Bankvall, L. (2011), Activity Linking in Industrial Networks , Gothenburg.

Behrends, S. (2011), Urban Freight Transport Sustainability — The Interaction of Urban Freight and Intermodal Transport , Gothenburg.

Ekwall, D. (2009), Managing Risk for Antagonistic Threats against Transport Network , Gothenburg.

Ellis, J. (2011), Assessing Safety Risks for the Sea Transport Link of a Multimodal Dangerous Goods Transport Chain , Gothenburg.

Finnsgård, C. (2013), Materials Exposure: The Interface between Materials Supply and Assembly , Gothenburg.

Fredriksson, A. (2011), Materials Supply and Production Outsourcing , Gothenburg.

Hanson, R. (2012), In - Plant Materials Supply: Supporting the Choice between Kitting and Continuous Supply , Gothenburg.

Hilletofth, P. (2010), Demand – Supply Chain Management , Gothenburg.

Hjort, K. (2013), On Aligning Returns Management with the Ecommerce Strategy to Increase Effectiveness , Gothenburg.

Ingrid, H. (2014), Organizing Purchasing and Supply Management across Company Boundaries , Gothenburg.

Ivert, L. (2012), Use of Advanced Planning and Scheduling (APS) Systems to Support Manufacturing Planning and Control Processes , Gothenburg.

Kalantari, J. (2012) Foliated Transportation Networks - Evaluating Feasibility and Potential , Gothenburg.

Kharrazi, S. (2012), Steering Based Lateral Performance Control of Long Heavy Vehicle Combinations , Gothenburg.

Lindholm, M.E., (2012) Enabling Sustainable Development of Urban Freight from a Local Authority Perspective , Gothenburg.

Mirzabeiki, V. (2013), Collaborative Tracking and Tracing — A Supply Chain Perspective , Gothenburg.

Roso, V. (2009), The Dry Port Concept , Gothenburg.

Sternberg, H. (2011), Waste in Road Transport Operations — Using Information Sharing to Increase Efficiency , Gothenburg.

Styhre, L. (2010), Capacity Utilization in Short Sea Shipping , Gothenburg.

Sundquist, V. (2014), The Role of Intermediation in Business Networks , Gothenburg.

Thörnblad, K. (2013), Mathematical Optimization in Flexible Job Shop Scheduling: Modelling, Analysis, and Case Studies , Gothenburg.

Jönköping International Business School:

Borgström, B. (2010), Supply chain strategising: Integration in practice, Jönköping.

Cui, L.G., (2012), Innovation and network development of logistics firms, Jönköping.

Skoglund, P. (2012), Sourcing decisions for military logistics in Peace Support Operations: A case study of the Swedish armed forces, Jönköping.

Jafari, H. (2014), Postponement and Logistics Flexibility in Retailing , Jönköping.

Wikner, S. (2011), Value Co - creation as Practice — On a supplier’s capabilities in the value generation process, Jönköping.

Karolinska Institute Department of Public Health Sciences:

Anund, A. (2009), Sleepiness at the Wheel , Sweden.

Linköping University:

Ekström, J. (2012), Optimization Approaches for Design of Congestion Pricing Schemes , Linköping.

Feldmann, A. (2011), A Strategic Perspective on Plants in Manufacturing Networks , Linköping.

Hansson, L. (2010), Public Procurement at the Local Government Level: Actor Roles, Discretion and Constraints in the Implementation of Public Transport Goals , Linköping.

Isaksson, K. (2014), Logistics Service Providers Going Green — A Framework for Developing Green Service Offerings , Linköping.

Lindskog, M. (2012), On Systems Thinking in Logistics Management — A Critical Perspective , Linköping.

Malmgren, M. (2010), Managing Risks in Business Critical Outsourcing: A Perspective from the Outsourcer and the Supplier , Linköping.

Martinsen, U. (2014), Towards Greener Supply Chains: Inclusion of Environmental Activities in Relationships between Logistics Service Providers and Shippers , Linköping.

Mårdh, S. (2013), Cognitive Erosion and its Implications in Alzheimer’s Disease , Linköping.

Musa, S.N. (2012), Supply Chain Risk Management: Identification, Evaluation and Mitigation Techniques , Linköping.

Olstam, J. (2009), Simulation of Surrounding Vehicles in Driving Simulators , Linköping.

Thoresson, K. (2011), To Calculate the Good Society: Cost - Benefit Analysis and the Border between Expertise and Policy in the Transport Sector , Linköping. NOT reviewed.

Linnaeus University:

Farvid, S.M. (2014), Essays on Inventory Theory , Sweden.

Samadi, R. (2010), Supply Chain Optimization and Market Coordinated Inventory , Sweden. NOT Reviewed.

Lund University:

Bagdadi, O. (2012), The Development of Methods for Detection and Assessment of Safety Critical Events in Car Driving , Lund.

Eng Larsson, F. (2014), On the Incentives to Shift to Low - Carbon Freight Transport , Lund.

Howard, C. (2013), Real - Time Allocation Decisions in Multi - Echelon Inventory Control , Lund.

Lundin, J. (2011), On Supply Chain Incentive Alignment: Insight from a Cash Supply Chain and a Trucking Service Supply Chain , Lund.

Olander, M. (2010), Logistik och Juridik. Moderna Affärsförbindelser och Kontrakt som Utmaningar för Förmögenhetsrätten, Lund. NOT Reviewed

Pazirandeh, A. (2014), Purchasing Power and Purchasing Strategies — Insights from the Humanitarian Sector , Lund.

Urciuoli, L. (2011), Security in Physical Distribution Networks: A Survey Study of Swedish Transport Operators , Lund.

Olander Roses, K. (2014), From PowerPoints to Reality - managing Strategic Change in the Paper Packaging Industry , Lund.

Sohrabpour, V. (2014), Packaging Design and Development for Supply Chain Efficiency and Effectiveness, Lund.

Abbasi, M. (2014), Exploring Themes and Challenges in Developing Sustainable Supply Chains - A Complexity Theory Perspective , Lund.

Ringsberg, H. (2013), Food Traceability in Regulated Fresh Food Supply Chains with an Emphasis on the Swedish Fishing Industry , Lund.

Beckeman, M. (2011), The Potential for Innovation in the Swedish Food Sector , Lund.

Dominic, C. (2011), Packaging Logistics Performance , Lund.

Johansson, O. (2009), On the Value of Intelligent Packaging - A Packaging Logistics Perspective , Lund.

Pålsson, H. (2009), Logistics value of using tracking data from uniquely labelled goods , Lund.

Stockholm University, Department of Psychology:

Eriksson, G. (2014), On Physical Relations in Driving: Judgments, Cognition and Perception , Stockholm.

Örebro University School of Business:

Ahlberg, J. (2012), Multi - Unit Common Value Auctions: Theory and Experiments , Örebro.

Arvidsson, S. (2010), Essays on Asymmetric Information in the Automobile Insurance Market , Örebro.

Bohlin, L. (2010), Taxation of Intermediate Goods — A CGE Analysis , Örebro.

Krüger, N. (2009), Infrastructure Investment Planning under Uncertainty , Örebro. NOT reviewed

Liu, X. (2013), Transport and Environmental Incentive Policy Instruments — Effects and Interactions , Örebro. NOT reviewed

Lodefalk, M. (2013), Tackling Barriers to Firm Trade. Liberalisation, Migration, and Servicification , Örebro.

Sund, B. (2010), Economic Evaluation, Value of Life, Stated Preference Methodology and Determinants of Risk , Örebro.

Swärdh, J. (2009), Commuting Time Choice and the Value of Travel Time , Örebro.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Rajkumar, C., Kavin, L., Luo, X. et al. Doctoral dissertations in logistics and supply chain management: a review of Nordic contributions from 2009 to 2014. Logist. Res. 9 , 5 (2016). https://doi.org/10.1007/s12159-016-0132-0

Download citation

Received : 02 November 2015

Accepted : 17 February 2016

Published : 14 March 2016

DOI : https://doi.org/10.1007/s12159-016-0132-0

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Doctoral dissertations
• Collection of articles
• Dissertation score
• Logistics and supply chain management
• Find a journal
• Publish with us
• Track your research

• Bibliography
• More Referencing guides Blog Automated transliteration Relevant bibliographies by topics
• Automated transliteration
• Relevant bibliographies by topics
• Referencing guides

Procurement and Supply Chain Management

Procurement and supply chain management research papers/topics, supply chain management practices and performance of milk processors in kenya.

Abstract Supply Chain Management practices are activities carried out by an organization to enhance the effectiveness of its supply chain. The practices improve organizational performance and enhance competitiveness. Milk processors act as a link between dairy farmers and the dairy market. Milk processors in Kenya have been performing poorly. There has been a 6.7% decline in performance in the dairy industry. The poor performance is a result of poor quality and low quantities of milk supplie...

The Effect of Procurement Practices on Supply Chain Performance of Selected Public Universities in Kenya

Abstract In any institution, success is majorly determined by the procurement practices adopted and how well these procurement practices are implemented. The study sought to establish the effect of procurement practices on supply chain performance of selected public Universities in Kenya. The study adopted a cross sectional descriptive survey research design and the target population was all public Universities in Counties in the Eastern and Central Region of Kenya. The sample size comprised...

EFFECT OF SUPPLIER MANAGEMENT PRACTICES ON SUPPLY CHAIN PERFORMANCE OF COUNTY REFERRAL HOSPITALS IN WESTERN REGION, KENYA

Abstract According to World Bank, supply chain performance has declined at an alarming rate resulting to a decrease in global GDP. This study sought to investigate effects of supplier management practices on supply chain performance of County Referral Hospitals in Western Region, Kenya. The specific objectives were to determine effect of supply chain collaboration practices on supply chain performance of County Referral Hospital (CRHs) in Western Region, Kenya; to assess effect of supplier s...

Supplier Selection Practices And Supply Chain Performance Of County Referral Hospitals In Kenya

Abstract The study examined the effect of supplier selection practices on supply chain performance of county referral hospitals in Kenya. Descriptive survey design was utilized. Both stratified random and simple random techniques were used in the selection of 81 respondents. For data collection close ended questionnaires and an interview schedule was used. Data was analyzed using descriptive statistics which entailed frequency and percentage and also using inferential statistics whereby simp...

Supplier Relationship Management Practices Procurement Ethics and Supply Chain Performance in County Governments

Abstract Purpose:The broad objective was to establish the moderating effect of procurement ethics on the relation between supplier relationship management practices and supply chain performance of Kenyan selected county governments. Design/Methodology/Approach:The study employed descriptive survey research design and targeted 112 procurement staff.Stratified and simple random techniques were used. Structured questionnaires were used for data collection. For data analysis descriptive and infe...

Supplier Development Practices and Supply Chain Performance of County Governments in Kenya

Abstract Many organizations have realized the significant role suppliers play in determining organizational performance. This study sought to examine the influence of supplier development practices on supply chain performance of County Governments in Kenya. This study employed a descriptive survey research design targeting 112 procurement staff. The study utilized both stratified and simple random techniques. For data collection close ended questionnaires was used. For data analysis descript...

Effect of Procurement Practices on Procurement Performance of Public Sugar Manufacturing Firms in Western Kenya

Abstract The main purpose of the study was to establish the effect of procurement practices on procurement performance of public sugar manufacturing firms in Western Kenya. The specific objectives of the study were to establish the effect of procurement planning and staff competence on procurement performance of public sugar manufacturing firms in western Kenya. The study employed a descriptive survey research design. Primary data was collected using questionnaires targeting employees in the...

Influence of Electronic Payment on Business Efficiency in Petrol Stations in Nyanza Region, Kenya

Abstract The Oil Sector Over the centuries, the oil industry has remained a predominant player in the world’s economy. This sector is known for its great contribution to many nations. The National Oil Board states that consumption of oil and petroleum products is projected to grow from 4.5 million metric tons to 12 million metric tons by 2030, yet currently, petroleum products procured face challenges. Recent findings have shown low efficiency in the procurement process at petrol stations ...

A Study on Route Planning in Logistics, Using Load Distance Model

The study aimed to identify how route planning for logistic companies can efficiently implemented. Route Planning explains basic transportation strategies and frameworks, as well as crucial functional needs, while considering contemporary changes in distribution planning. Companies may save mileage, fuel use, and carbon emissions by using a route planning system that calculates the most effective routes. Businesses may better recognize unforeseen deviations and communicate proactively to...

Environmental Sustainability Strategies in Organizations: The Case Study of Apparel Companies

Companies are often seen as money making entities that place less emphasis on social concerns and promote inequality. However, many companies are coming to terms with their responsibility to make meaningful contributions to society. There have been growing needs for sustainable operations in all industries. This focus has turned to how companies can be more socially and environmentally responsible and sustainable. Sustainability is the design of human and industrial systems to ensure that hum...

Supply Chain Analytics

A wealth of data is continually being produced by supply chain networks. This data contains trends and patterns that can be found using analytics to provide useful information. The supply chain network's overall effectiveness and efficiency can then be stated to benefit greatly from analytics. The value and function of analytics in the supply chain industry are examined in this study through a critical analysis of the prior literature, a look at some major obstacles to supply chain analytics ...

Inventory Management Systems and Performance of Selected Foreign Super Markets in Kampala, Uganda

ABSTRACT The study sought to assess the effect of inventory management systems on performance of super markets in Kampala Uganda. It was guided by three specific objectives, that included; to determine the effect of just-in-time inventory on performance of super markets in Kampala Uganda, to establish the effect of vendor managed inventory on performance of super markets in Kampala Uganda and to establish the effect of material requirements planning on performance of super markets in Kampala...

The Effectiveness of Clearing and Forwarding Procedures on the Procurement Efficiency Case Study Somalia Port Authority

Table of Contents Title page ............................................................................................ .i Table of contents .................................................................................... .ii LIST OF ABBREVIATIONS ........................................................................................ .iv LIST OF APPENDICES ................................................................................................ .ix ACKNOWLEDGEMENT .................

Donor Procurement Requirements and Supply Chain Management in Selected NGOs in Bangui, Central African Republic

ABSTRACT The study was confined on Donor Procurement Requirements and Supply Chain Management in Selected NGOs in Bangui, Central African Republic. The study was guided by the following objectives: To determine the social demographic characteristics of respondents in terms of; Gender, Age, Educational qualification, Marital status; To determine the level of Donor Procurement Requirements; To determine the level of Supply Chain Management in Selected NGOs; To establish if there is a significan...

Appraisal of the Deployment of Information Communication Technology (ICT) in Traffic Management in Port Harcourt Metropolis

Traffic demand is growing steadily in the world today, the authorities are with daily challenges, such as the road and time spent travelling, there should certainty added global concern about the protection of the environment different kinds of contaminations including noise and vibration caused by todays level motorization. The aim of this study is to appraise the deployment of ICT in the management and control of traffic in the Port Harcourt metropolis. This study used empirical evidence fo...

Procurement research topics, Supply chain management research topics, Procurement projects, thesis, dissertations, research papers, seminars. Supply chain management projects, thesis, dissertations, research papers

Popular Papers/Topics

Procurement practices and organisational performance of private universities in greater accra, the effect of information and communication technology (ict) on inventory management of organization.case study: kenya ports authority (kpa) mombasa, effect of supply chain management practices on the performance of supermarkets in luanda town, kenya, the role of a purchasing department in the performance of an. organization. a case study of tana delta irrigation project (tdip), effect of e - procurement on supply chain performance of county governments in kenya: case study of busia county government, assessing procurement committees and procurmeent laws in the northern region of ghana, "the impact of negotiation strategies on procurement efficiency in an organization"case study world food programme-uganda, effect of lean practices on operational performance of vihiga county government, kenya, analysis of the relationship between strategic procurement techniques and corporate performance of united millers, kisumu, relationship betweengreen manufacturing practices and performance of kibos sugar and allied industries limited kisumu, kenya, effect iof irisk iassessment ipractices ion isupply ichain iperformance iin ipublic icorporations: case iof ikenya ipower icompany, electronic procurement and organizational performancf~ a case stui)y of spear motors ugani)a ltd, buyer-supplier relationship on supply chain performance a case study of byeyogere steelworks ltd, relationship between supply chain risks, supply chain strategies and performance of large scale manufacturing firms in kenya, quality control measures and efficiency in manufacturing indutries: a case study of mukwano industries limited.

Privacy Policy | Refund Policy | Terms | Copyright | © 2024, Afribary Limited. All rights reserved.

• Library Home
•   BracU IR
• Brac Institute of Governance and Development (BIGD)
• Masters in Procurement and Supply Management (MPSM) Program

Thesis & Dissertation (Masters in Procurement and Supply Management)

By Issue Date Authors Titles Subjects

Search within this collection:

Recent Submissions

Digital transformations in logistics operations: challenges and enables in fast moving consumer goods (FMCG) sector in Bangladesh 

Methods of procurement in overseas training: finding a cost effective way to implement overseas training 

Challenges of e-GP implementation in public procurement: case study on Election Commission Secretariat, (a constitutional organization) Dhaka, Bangladesh 

Sustainable procurement in transportation sector of Bangladesh 

Electronic Government Procurement (e-GP): digital transformation of public procurement - a case study of the Soil Resource Development Institute (SRDI), Bangladesh 

Impact of sustainable supply chain on Bangladesh readymade garments industry: a case on three factories in Narayanganj and Gazipur 

Public procurement legislation in Bangladesh: a study on the application of PPA, 2006 and PPR, 2008 in the procurement activities of Election Commission Secretariat 

Procurement management is a challenge of project management: a study on department of social services, ministry of social welfare 

The strategy of import cost minimization of Akij Ceramics Limited through SCM implementation 

Supply chain of automotive industry in Bangladesh: feasibility and sustainability with BoP. 

Sustainable procurement in the RMG sector of Bangladesh: a focus on ethical practices & environmental impact 

Sustainable public procurement practice: a study on Bangladesh Institute of Capital Market 

Supply Chain Management of Ha-Meem Group 

Five Trends in Supply Chain Management that can make SMEs and F-Commerce more competitive: A perspective of fashion tunnel 

Supply Chain Management System of Joint Venture Medical Industry (JMI) Group 

Building local capacity for effective and sustainable local partnership: a path towards sustainable development 

Procurement and supply management of Eskayef Pharmaceuticals Limited 

Digital transformation of supply chain management -a study on Akij Cement Co. Limited 

Digital public services of Bangladesh 

Evaluating the e-GP system in Local Government Institutions (LGIs): a study on 30 Pourashavas 

Policy guidelines.

• BracU Policy
• Publisher Policy

Home » Blog » Dissertation » Topics » Supply Chain Management » Dissertation Topics In Supply Chain Management (150 Examples)

Dissertation Topics In Supply Chain Management (150 Examples)

Mark Oct 27, 2018 Dec 11, 2023 Supply Chain Management No Comments

Supply chain management is one of the research domains, which have gained a lot of attention from researchers. The dissertation topics in supply chain management are offered as it has a strong impact on the different aspects of businesses. In the modern era, supply chain management has gained a lot of attention and businesses are […]

Supply chain management is one of the research domains, which have gained a lot of attention of the researchers. The MBA dissertation topics in supply chain management are offered as it has a strong impact on the different aspects of businesses.

In the modern era, the supply chain management has gained a lot of attention and businesses are emphasizing on horizontal integration of the supply chain components. It helps in getting rid of the traditional barriers and adopting advanced methods and techniques to carry out the operations and processes.

Research topics in supply chain offer wide understanding related to the examination of different elements and components of supply chain management. The field of supply chain management is evolving rapidly, and it has attracted researchers to find out how supply chain and procurement are contributing in the business context.

We also offer separate posts related to project topics on Logistics and SCM and procurement and SCM .

A list Of Dissertation Topics in supply chain management

Following list contains supply chain management topics examples. If you want anyone of them to use, make sure you get this rephrased from us or let us assist you with a dissertation topic similar to what you have chosen.

Supply Chain Strategy:

Exploring the Impact of Digitalization on Supply Chain Strategy.

Evaluating the Resilience of Supply Chain Strategies to Global Disruptions.

Sustainable Supply Chain Strategy: Analyzing Best Practices and Metrics.

The Role of Supply Chain Flexibility in Adapting to Market Changes.

Aligning Supply Chain Strategy with Business Strategy: A Case Study Approach.

Assessing the Impact of Industry 4.0 on Supply Chain Strategy.

Risk Management in Global Supply Chain Strategies.

The Influence of Regulatory Changes on Supply Chain Strategy.

Exploring Agile Supply Chain Strategies in Dynamic Markets.

Digital Twins and their Role in Enhancing Supply Chain Strategy.

Supply Chain Planning:

Demand Forecasting Accuracy and Its Impact on Inventory Management.

Assessing the Integration of Artificial Intelligence in Supply Chain Planning.

Empirical Analysis of Sales and Operations Planning (S&OP) Effectiveness.

Evaluating the Impact of Supply Chain Planning on Overall Business Performance.

Challenges and Opportunities in Implementing Agile Supply Chain Planning.

Sustainable Supply Chain Planning Practices: A Comparative Study.

Enhancing Forecasting Accuracy through Advanced Analytics in Planning.

The Role of Machine Learning in Optimizing Supply Chain Planning Processes.

Dynamic Pricing Strategies and Their Influence on Supply Chain Planning.

Integrating Environmental Sustainability into Supply Chain Planning.

Procurement and Supplier Management:

Assessing the Relationship Between Supplier Management and Firm Performance.

Blockchain Technology: Enhancing Transparency in Procurement Processes.

Comparative Analysis of Approaches to Strategic Sourcing.

Impact of Supplier Diversity Programs on Organizational Innovation.

Vendor Evaluation Models: A Critical Review and Comparative Study.

Sustainable Procurement Practices: Case Studies from Various Industries.

The Role of E-Procurement in Modern Supplier Management.

Challenges and Opportunities in Implementing Sustainable Procurement.

Digital Transformation in Supplier Relationship Management.

Risk Mitigation Strategies in Global Procurement.

Logistics and Distribution:

Optimizing Last-Mile Delivery Strategies for E-commerce.

Warehouse Automation: Benefits and Challenges in Logistics.

Role of Cross-Docking in Improving Supply Chain Efficiency.

Sustainability in Freight Transportation: Evaluating Green Logistics Practices.

Impact of Reverse Logistics on Sustainability and Cost-Efficiency.

Future Trends in Autonomous Vehicles and their Implications on Logistics.

Data-Driven Decision-Making in Logistics Operations.

Advanced Robotics in Warehousing: Improving Distribution Efficiency.

Blockchain in Logistics: Ensuring Security and Transparency.

Sustainable Packaging Solutions in Modern Distribution.

Inventory Management:

RFID Technology: Enhancing Inventory Accuracy and Visibility.

JIT Inventory Management: Implementation Challenges and Benefits.

Data Analytics in Optimizing Inventory Levels for Retailers.

Impact of SKU Proliferation on Inventory Holding Costs.

Blockchain Technology in Inventory Visibility: A Comparative Study.

Sustainability Practices in Inventory Control.

The Role of Predictive Analytics in Inventory Management.

Circular Economy Principles in Inventory Sustainability.

Lean Inventory Management: Streamlining Operations for Efficiency.

Environmental and Ethical Considerations in Inventory Decision-Making.

Technology in Supply Chain:

IoT and Big Data Analytics Integration in Supply Chain Decision-Making.

Cybersecurity Risks in Adopting Advanced Technologies in the Supply Chain.

Cloud-Based Supply Chain Platforms: Efficiency and Security Evaluation.

AI-Driven Predictive Analytics for Supply Chain Risk Management.

The Role of Digital Twins in Enhancing Supply Chain Visibility and Resilience.

Blockchain Applications in Supply Chain Traceability.

Machine Learning Applications in Supply Chain Optimization.

Challenges and Opportunities in Implementing Industry 4.0 in Supply Chains.

Robotic Process Automation in Supply Chain Operations.

3D Printing: A Disruptive Technology in Supply Chain Management.

Supply Chain Collaboration:

CPFR Implementation: Success Factors and Challenges in Collaborative Planning.

Impact of Blockchain on Supply Chain Collaboration and Transparency.

Role of Information Sharing in Enhancing Supply Chain Collaboration.

Inter-Organizational Collaboration for Sustainable Supply Chains.

Vendor-Managed Inventory (VMI): In-Depth Analysis of Implementation Models.

Collaborative Logistics in Global Supply Chain Networks.

Assessing the Effectiveness of Collaborative Planning and Forecasting.

The Influence of Supply Chain Culture on Collaboration Success.

Digital Platforms for Enhancing Supply Chain Collaboration.

Overcoming Cultural and Organizational Barriers in Collaborative Supply Chains.

Sustainability in Supply Chain:

Carbon Footprint Reduction Strategies in Global Supply Chains.

Circular Economy Practices: A Comparative Analysis in Supply Chain Management.

Sustainable Supply Chain Metrics: A Framework for Evaluation and Improvement.

Socially Responsible Supply Chain Practices and Consumer Perception.

The Role of Green Supply Chain Management in Corporate Brand Image.

Evaluating the Environmental Impact of Supply Chain Practices.

Regulatory Compliance and Ethical Practices in Sustainable Supply Chains.

Assessing the Economic Viability of Sustainable Supply Chain Practices.

Impact of ESG (Environmental, Social, Governance) Factors on Supply Chain Performance.

Integrating Sustainable Practices in Supplier Selection and Evaluation.

Risk Management in Supply Chain:

Supply Chain Resilience: Building Strategies for Effective Risk Mitigation.

Impact of Political and Regulatory Changes on Supply Chain Risk.

Financial Risk Management in Global Supply Chains: Case Studies from Various Industries.

Integrating AI and Machine Learning in Predictive Supply Chain Risk Management.

The Role of Insurance in Supply Chain Risk Mitigation: A Comparative Study.

Cybersecurity Risks in Global Supply Chain Networks.

Strategies for Managing Supply Chain Disruptions and Uncertainties.

Predictive Analytics for Identifying and Mitigating Supply Chain Risks.

Effective Strategies for Counteracting Supply Chain Fraud.

Evaluating the Impact of Climate Change on Supply Chain Risk Management.

Quality Management in Supply Chain:

Six Sigma Practices in Supply Chain Quality Management: A Comprehensive Review.

Impact of Total Quality Management (TQM) Principles on Supply Chain Performance.

ISO Standards and Their Influence on Supply Chain Quality Management.

Continuous Improvement Initiatives in Supply Chain Quality Assurance.

Integrating Lean Principles for Efficient Quality Management in the Supply Chain.

Evaluating the Effectiveness of Supplier Quality Management Programs.

Enhancing Product Quality through Collaborative Quality Control in the Supply Chain.

Implementing Industry 4.0 Technologies for Improved Supply Chain Quality.

Metrics and Key Performance Indicators (KPIs) for Measuring Supply Chain Quality.

Assessing the Impact of Quality Management Practices on Customer Satisfaction.

Humanitarian and Humanitarian Supply Chain:

Disaster Relief Logistics: Improving Coordination and Efficiency.

Humanitarian Aid Distribution: Challenges and Innovations.

The Role of Technology in Enhancing Humanitarian Supply Chains.

Public-Private Partnerships in Humanitarian Efforts: Lessons from Case Studies.

Evaluating the Effectiveness of Humanitarian Supply Chain Resilience.

Sustainability Practices in Humanitarian Supply Chains.

Cross-Sector Collaboration in Humanitarian Logistics.

Technology Solutions for Real-Time Monitoring in Humanitarian Operations.

Humanitarian Supply Chain Risk Management Strategies.

Building Resilient Humanitarian Supply Chains: A Framework for Action.

Retail Supply Chain:

Omnichannel Supply Chain Management: Meeting Customer Expectations.

Retail Inventory Management: Balancing Demand and Supply.

E-commerce Logistics: Fulfillment Challenges and Solutions.

Sustainable Practices in Retail Supply Chains.

The Impact of Technology on the Future of Retail Supply Chains.

Supply Chain Transparency in the Retail Industry.

Retail Fulfillment Strategies for Fast and Accurate Deliveries.

The Role of Data Analytics in Retail Supply Chain Optimization.

Managing Seasonal Variations in Retail Supply Chains.

Blockchain Applications for Enhancing Trust in Retail Supply Chains.

Supply Chain Performance Measurement:

Key Performance Indicators (KPIs) for Effective Supply Chain Performance Measurement.

Balanced Scorecard Implementation in Supply Chain Management.

Benchmarking Supply Chain Performance: Best Practices and Challenges.

Metrics for Assessing Sustainability in Supply Chain Performance.

Real-time Monitoring and Analytics for Improved Supply Chain Performance.

The Role of Data Visualization in Supply Chain Performance Measurement.

Enhancing Decision-Making through Advanced Analytics in Supply Chain Performance.

Measuring and Managing Supply Chain Resilience.

Performance Measurement Systems in Global Supply Chains.

Continuous Improvement Strategies for Supply Chain Performance.

Regulatory Compliance and Ethical Practices:

Regulatory Compliance in Global Supply Chains: Challenges and Solutions.

Ethical Sourcing and Procurement: A Framework for Responsible Practices.

Fair Trade Practices in Supply Chains: Impact on Stakeholders.

Anti-Corruption Measures in Supply Chain Operations.

Integrating Ethical Considerations into Supply Chain Decision-Making.

Compliance with Environmental and Labor Standards in Global Supply Chains.

The Role of Transparency in Achieving Regulatory Compliance.

Social Responsibility and Accountability in Supply Chain Management.

The Influence of International Trade Agreements on Supply Chain Practices.

Assessing the Impact of Ethical Practices on Supply Chain Reputation.

Lean and Agile Supply Chains:

Lean Manufacturing Principles and Their Application in Supply Chains.

Agile Supply Chain Strategies: Adapting to Market Dynamics.

Hybrid Approaches to Lean-Agile Supply Chain Management.

Lean Six Sigma Implementation in Supply Chain Processes.

Value Stream Mapping for Identifying Waste and Improving Efficiency.

Behavioral Aspects of Lean and Agile Supply Chain Implementation.

Sustainable Practices in Lean and Agile Supply Chains.

Lean Supply Chains in the Context of Industry 4.0.

The Role of Technology in Enhancing Agility in Supply Chains.

Implementing Lean and Agile Practices for Enhanced Supply Chain Resilience.

In conclusion, the diverse dissertation topics in supply chain management cover strategic, technological, and specialized areas. Scholars can explore critical issues, from risk management to sustainability, contributing valuable insights to this dynamic field. These topics provide a foundation for focused research, enabling scholars to make meaningful contributions to the evolving landscape of global supply chains..

To examine the role of top management in supply chain management practices.

Evaluating the importance of quality management in supply chain management.

A study of factors affecting the supply chain management in multinational corporations.

An evaluation of the role of vendor selection in the context of supply chain management.

To find out how information technology is significantly affecting the supply chain management.

To find out the different factors that positively and negatively affect the supply chain management strategies.

To examine how the effective management of the supply chain can help in promoting customer satisfaction.

To study the barriers to implementing the green supply chain management in manufacturing industries.

Determining the different parameters and success factors of supply chain management.

To study the evolution of supply chain management and how technology has contributed to the evolution.

Critical evaluation of the implementation of a supply chain operating reference model in the manufacturing industry.

Studying the impact of 3PL outsourcing on the supply chain management in manufacturing companies.

Evaluating the Bullwhip effect in the supply chain.

Critical analysis of the different types of risks that influence the supply chain management.

Studying the factors that affect the supply chain decisions in the automobile industry.

Evaluating the impact of organizational culture on the strategic choices and supply chain management.

The role of procurement strategies in achieving the organizational targets.

Finding out the key factors that help in securing the supply chains.

A critical analysis of how the failure of supply chain management affect the customer satisfaction for automobiles.

Identifying the advantages of integrated supply chain practices and performance.

How does supply chain flexibility contribute to achieving the strategic outcomes.

Focusing on the impact on just in time inventory on enhancing the efficiency of the supply chain in large organizations.

Evaluating the pros and cons of outsourcing logistic operation activities in the FMCG sector.

Studying the operations management strategies of B2C and B2B business models.

Finding out the role of supply chain in large and diversified business organizations.

Studying the role of e-commerce in the supply chain management in the 21st century.

To study the influence of lean manufacturing techniques in the supply chain and operations management.

Investigating the relationship between customer satisfaction and quality management in the supply chain context.

Examining the inventory management systems and its evolution with time.

Evaluating the process of product development and its impact on supply chain management.

Topic With Mini-Proposal (Paid Service)

Along with a topic, you will also get;

• An explanation why we choose this topic.
• 2-3 research questions.
• Key literature resources identification.
• Suitable methodology with identification of raw sample size, and data collection method
• View a sample of topic consultation service

Get expert dissertation writing help to achieve good grades

• Writer consultation before payment to ensure your work is in safe hands.
• Free topic if you don't have one
• Draft submissions to check the quality of the work as per supervisor's feedback
• Free revisions
• Complete privacy
• Plagiarism Free work
• Guaranteed 2:1 (With help of your supervisor's feedback)
• 2 Instalments plan
• Special discounts

Other Posts

• Dissertation Topics In logistics And Supply Chain Management (30 Examples) December 5, 2018 -->
• Dissertation Topics in Procurement Management (26 Examples) For Research December 5, 2018 -->

Message Us On WhatsApp

Cookie policy

• Supplier Login
• Call Now: 800-322-2644

The Digital Supply Chain Company

Home » Blog » 6 Critical MRO Supply Chain Metrics You Should Be Tracking

6 Critical MRO Supply Chain Metrics You Should Be Tracking

• August 21, 2024
• Industrial MRO and Reliability , Supply Chain Management

Share This Post

The True Cost of Not Transitioning To Digital Supply Chain Management

Combating Inflation in MRO Procurement & Supply Chain Management: Best Practices & the Power of Group Purchasing

• Call: 800-322-2644
• Fax: 215-633-4426

SDI, Inc. Post Office Box 1540, Newtown, PA 18940-0897

Supply Chain Services

• Cooperative Purchasing
• Master Data Management
• Supplier Management
• Source to Pay
• Critical Spare Parts Management
• Storeroom & Warehouse Management
• Reliability & Continuous Improvement
• Implementation & User Adoption

The Supply Chain Ecosystem

• Channel Partners
• Our Leadership
• Privacy Policy

Copyright ©2024 SDI, Inc.