loop presentation on power point

How-To Geek

How to loop a powerpoint presentation.

Your changes have been saved

Email is sent

Email has already been sent

You’ve reached your account maximum for followed topics.

Quick Links

Set up your slideshow to be looped, apply automatic slide transitions.

Slideshows are sometimes used to display images at events, such as weddings or trade shows. Whatever the occasion might be, you’ll want to loop your PowerPoint presentation so your guests aren’t staring at a blank screen. Here’s how it’s done.

First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the “Set Up” group of the “Slide Show” tab and then select the “Set Up Slide Show” button.

The “Set Up Show” window will appear. In the “Show options” group, check the box next to “Loop Continuously until Esc.” Once selected, click “OK” in the bottom-right corner of the window.

Now, when you play your slideshow, it will end only when you press the “Esc” key instead of when you've finished the last slide.

Related: How to Make YouTube Videos Loop Continuously

One caveat: With the way we currently have it set up, the slideshow will proceed only when someone clicks the mouse button. That’s fine if there will be a speaker present at all times. Otherwise, you’ll need to set up automatic slide transitions.

Head back to the “Set Up Show” window by selecting “Set Up Slide Show” in the “Set Up” group of the “Slide Show” tab.

There are a couple of options you need to select, but one important note is that you must first select “Using Timings, If Present” under the “Advance Slides” group.

The next option we select will lock a few things in place (which is why you need to select “Using Timings, If Present” first).

Under the “Show Type” group, select “Browsed at a Kiosk (Full Screen)." The “Loop Continuously until Esc” option will be enabled automatically if you haven’t already turned it on, and the option you’ve selected under “Advance Slides” will remain unchanged.

Select “OK” when ready to proceed.

Without the “Browsed at a Kiosk” option enabled, the automatic slide progressions would be disabled if someone were to press the Back key. With it enabled, the Forward and Back keys are locked, allowing the slideshow to automatically progress unattended without fear of someone breaking it.

Now it’s time to set the timings of the slides. Head over to the “Transitions” tab. In the “Timing” group, check the box next to “After” and set the timing at which you’d like each slide to progress. Note that it doesn’t matter if the box next to “On Mouse Click” is checked or not---it won’t work.

After that, select the “Apply to All” option in the same group.

Now, when you play your slideshow, it will continuously loop without interruption. To exit the slideshow, press the “Esc” button.

• Microsoft Office

How to Loop a PowerPoint Slide Show to Repeat Automatically

Set up a PowerPoint Presentation That Loops or Repeats Continuously

by Avantix Learning Team | Updated November 12, 2021

Applies to: Microsoft ®  PowerPoint ®  2013, 2016, 2019 and 365 (Windows)

You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

Recommended article: 5 PowerPoint Keyboard Shortcuts to Run a Slide Show

Do you want to learn more about PowerPoint? Check out our virtual classroom or in-person PowerPoint courses >

Screenshots in this article are from PowerPoint 365 but are similar in older versions of PowerPoint.

Step 1: Apply transitions to automatically advance slides during a slide show

Transitions occur between slides when you run a slide show.

To apply transitions to automatically advance slides during a slide show:

• In Normal View or Slide Sorter View, display or select a slide.
• Click the Transitions tab in the Ribbon.
• Select a transition in the Transitions gallery (such as Fade).
• Click Effect Options and choose the desired option. Effect Options change depending on the transition you selected.
• In the Timing group, click the arrows beside Duration to set the timing you want (in seconds) for the transition. You may also type a duration.
• In the Timing group, under Advance Slides, deselect or uncheck On mouse click and beside After, select or click the up and down arrows to set the timing to transition to the next slide. You may also type a duration.
• In the Timing group, click Apply to All.

In the Transitions tab in PowerPoint, you can select the type of transition (such as Fade) as well as timing options:

Step 2: Set up a presentation to loop during a slide show

To set up a PowerPoint presentation to loop during a slide show:

• Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears.
• Under Show type, if you select Presented by a speaker (full screen), the speaker or those watching the slide show will have control over when they advance slides. This is the default setting for slide shows. If you select Browsed by an individual (window), those watching the slide show do NOT have control over when slides advance. If you select Browsed at kiosk (full screen), those watching the slide show do NOT have control over when slides advance and the presentation automatically loops until those watching press Escape (Esc).
• Under Show options, select Loop continuously until 'Esc'. You will be able to select this option if you selected one of the first two options under Show type.

Below is the Set Up Show dialog box with Presented by speaker selected and looping enabled:

If you want to set specific timings for slides to advance or to add narration, check out the article How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running Presentation) . If you have audio or video in the presentation, you'll need to set the media to play automatically (on the Playback tab in the Ribbon) and animations will also need to be set to run automatically.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Embed a YouTube Video in PowerPoint

How to Hide and Unhide Slides in PowerPoint (with Shortcuts)

How to Insert Video in PowerPoint (from a File on Your PC or a Shared Drive)

PowerPoint Keyboard Shortcuts to Play and Control Video During a Slide Show

How to Add Animation in PowerPoint (Animate Images, Text and Other Objects)

Related courses

Microsoft PowerPoint: Intermediate / Advanced

Microsoft PowerPoint: Design for Non-Designers

Microsoft PowerPoint: Animations Bootcamp

Microsoft Excel: Intermediate / Advanced

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at [email protected] if you'd like to arrange custom instructor-led virtual classroom or onsite training on a date that's convenient for you.

Copyright 2024 Avantix ® Learning

You may also like

How to Insert or Type the Copyright Symbol in PowerPoint (4 Ways with Shortcuts)

You can insert or type the copyright symbol (©) in PowerPoint using the Insert Symbol command or by using keyboard shortcuts. In this article, we'll review 4 ways to insert the copyright symbol in PowerPoint. You can insert the copyright symbol in Normal View or Slide Master View.

How to Insert or Type U with an Accent Mark in PowerPoint (Ù, Ú, Û, Ü, ù, ú, û, or ü)

You can insert or type u with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter u can be inserted with an accent in both upper or lower case. The following are common accented characters that you can insert or type in PowerPoint in upper or lower case: grave (Ù or ù), acute (Ú or ú), circumflex (Û or û) and umlaut (Ü or ü).

How to Insert or Type O with an Accent Mark in PowerPoint (Ò, Ó, Ô, Õ, Ö, ò, ó, ô, õ or ö)

You can insert or type o with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter o can be inserted with an accent in both upper or lower case. The following are common accented characters that you can insert or type in PowerPoint in upper or lower case: grave (Ò or ò), acute (Ó or ó), circumflex (Ô or ô), tilde (Õ or õ) and umlaut (Ö or ö).

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at [email protected]

Our Courses

Avantix Learning courses are offered online in virtual classroom format or as in-person classroom training. Our hands-on, instructor-led courses are available both as public scheduled courses or on demand as a custom training solution.

All Avantix Learning courses include a comprehensive course manual including tips, tricks and shortcuts as well as sample and exercise files.

VIEW COURSES  >

Contact us at  [email protected]  for more information about any of our courses or to arrange custom training.

Privacy Overview

Pin it on pinterest.

• Print Friendly

How to Loop a Powerpoint Presentation: Step-by-Step Guide

Looping a PowerPoint presentation is an easy way to keep your slides on repeat for an audience or a display. It’s perfect for trade shows, informational kiosks, and even personal use when you don’t want to manually control the presentation. In just a few clicks, you can automate your PowerPoint to loop continuously until you decide to stop it.

Step by Step Tutorial on How to Loop a PowerPoint Presentation

Before we dive into the nitty-gritty of looping your presentation, let’s understand what we’re about to do. By following these steps, we’ll set your PowerPoint to play over and over without any manual intervention. It’s like putting your favorite song on repeat, but with slides!

Step 1: Open your PowerPoint presentation

Open the PowerPoint presentation you want to loop.

When you open your presentation, make sure you’re on the slideshow tab. This is where all the magic happens for presentation playback.

Step 2: Select ‘Set Up Slide Show’

Click on the ‘Slide Show’ tab and then select ‘Set Up Slide Show’.

This is where you can tweak the settings for how your presentation is displayed. It’s like the control center for your slideshow.

Step 3: Choose ‘Loop continuously until ‘Esc”

In the ‘Set Up Show’ options, check the box for ‘Loop continuously until ‘Esc”.

By checking this option, you’re telling PowerPoint to keep cycling through your slides until you press the Escape key to stop it.

Step 4: Set the slides to advance automatically

Under ‘Advance slides’, select ‘Using timings, if present’ or set the ‘After’ option to the number of seconds you want each slide to be displayed.

This step is crucial if you want your presentation to move through slides without you clicking anything. It’s like setting an automatic timer for each slide.

Step 5: Save your settings and test the presentation

Click ‘Ok’ to save your settings and start your presentation to test the loop.

After you’ve saved your settings, give your looped presentation a dry run to make sure everything flows smoothly. If it does, you’re all set!

After completing these steps, your PowerPoint presentation will loop continuously. Whether you’re away from your computer or engaged with an audience, your presentation will keep running in the background, providing a seamless flow of information.

Tips for Looping a PowerPoint Presentation

• Make sure your slides are self-explanatory since you might not be there to explain each one.
• Keep an eye on the timings if your slides have animations or transitions.
• Use high-quality images and readable text to ensure your presentation looks good on repeat.
• Consider adding background music to keep the loop engaging.
• Always do a full run-through to check for any glitches that might disrupt the loop.

Frequently Asked Questions

How do i loop a powerpoint presentation with sound.

To loop a PowerPoint presentation with sound, embed the audio file in your presentation and set it to play across slides. Then, follow the steps above to loop the presentation itself.

Can I loop a PowerPoint presentation on a TV or monitor?

Yes, you can loop a PowerPoint presentation on a TV or monitor by connecting your computer and setting up the presentation to loop as instructed above.

Is it possible to loop only specific slides in a presentation?

To loop specific slides, you can create a custom slide show within PowerPoint that includes only the slides you want to loop, and then set that custom show to loop.

Can I loop a PowerPoint presentation on a loop without using PowerPoint?

To loop a presentation without PowerPoint, you can convert it to a video format that supports looping, such as MP4, and use a media player to loop it.

How can I stop a looped PowerPoint presentation?

To stop a looped PowerPoint presentation, simply press the ‘Esc’ key on your keyboard, and it will return to normal view.

• Open your PowerPoint presentation.
• Select ‘Set Up Slide Show’.
• Choose ‘Loop continuously until ‘Esc”.
• Set the slides to advance automatically.
• Save your settings and test the presentation.

Looping a PowerPoint presentation can be incredibly useful in various situations, from professional trade shows to casual photo slideshows. With the simple steps outlined above, anyone can set up their presentation to run on a continuous loop, freeing up time and ensuring the information is always on display. Remember to check your timings, especially if you have animations or transitions, and test your loop thoroughly to avoid any hiccups. Now, you’re ready to create smooth, endlessly looping presentations that can captivate and inform your audience without a hitch. Keep experimenting with PowerPoint’s features to make your presentations even more powerful, and always look for ways to improve and streamline your work. Happy presenting!

Matt Jacobs has been working as an IT consultant for small businesses since receiving his Master’s degree in 2003. While he still does some consulting work, his primary focus now is on creating technology support content for SupportYourTech.com.

His work can be found on many websites and focuses on topics such as Microsoft Office, Apple devices, Android devices, Photoshop, and more.

Share this:

• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Related Posts

• How to Loop a Slideshow on Powerpoint 2013: Step-by-Step Guide
• How to Loop a Powerpoint Office 365 Slideshow
• How to Download a Google Slides Presentation as a Powerpoint File
• How to Rotate a Powerpoint Slide Presentation
• How to Do a Powerpoint Google Slides Presentation Conversion
• How to End Powerpoint on Last Slide in Powerpoint 2010: A Step-by-Step Guide
• How to Make Google Slides Vertical (5 Quick Steps)
• How to Delete a Slide in Powerpoint 2010: Step-by-Step Guide
• How to Hide a Slide in Powerpoint 2010: A Step-by-Step Guide
• How to Insert Slides from Another Presentation: Powerpoint 2024 Guide
• How to Add a New Slide in Google Slides: A Step-by-Step Guide
• How to Delete Multiple Slides in Google Slides: A Step-by-Step Guide
• How to Make a Powerpoint Slide Vertical in Powerpoint 2013: A Step-by-Step Guide
• How to Convert Powerpoint to Google Slides: A Tech Solution
• How to Duplicate a Slide in Powerpoint: A Step-by-Step Guide
• How to Merge Files in Powerpoint: A Step-by-Step Guide
• How to Remove Slide Numbers in Powerpoint 2019: Easy Steps
• How to Add a Hyperlink on Google Slides
• How to Change Slide Size in Powerpoint 2016
• Determining the Size of a PowerPoint Slide in Pixels: A Guide

Get Our Free Newsletter

How-to guides and tech deals

You may opt out at any time. Read our Privacy Policy

How to Loop a PowerPoint Presentation

Just like an animated GIF or video clip, you can loop a slideshow in Microsoft PowerPoint. This is ideal if you set the presentation to automatically play because it starts at the beginning each time it ends to create an infinite loop.

Here’s how to loop a PowerPoint presentation on Windows and Mac. Currently, PowerPoint on the web doesn’t offer a Loop feature.

Set the Timing to Advance the Slides

Before you set your PowerPoint presentation to loop, you may want to adjust the timing to advance through the slides. You can use the same time for each slide or display particular slides for a longer amount of time.

• Open your presentation in PowerPoint on Windows or Mac and go to the Transitions tab.
• In the Timing section of the ribbon, check the box for After and enter the time in seconds to the right. You can also use the arrows to move the time up or down in small increments.

• To set different times for slides, select the next slide and use the above step to choose the After timing. Continue this process for the remaining slides.
• To set the same timing for all slides in the presentation, select Apply To All in the Timing section.

• If you only want continuous play to advance the slides, you can uncheck the box directly above for On Mouse Click . However, if you want the ability to advance the slides with a mouse click and after a certain amount of time, you can leave the box checked.

Once you have the timings set to advance the slides, you can turn on the Loop setting.

• Go to the Slide Show tab and select Set Up Slide Show in the Set Up section.

• Under Show type , choose an option to play your presentation.
• If you plan to present the slideshow or have an individual view the show, choose one of the first two options. Then, check the box for Loop continuously until ‘Esc’ in the section beneath.

Confirm that the Using timings, if present setting is marked under Advance Slides.

• If you want the slideshow to play automatically , choose the third option, Browsed at a kiosk . You’ll then see the Loop continuously until ‘Esc’ and Using timings, if present settings are automatically marked and disabled for changing.

• Adjust any other options per your preference and use the OK button to save the settings.

When you’re ready to begin the slideshow and let it play, check out our how-to for starting the PowerPoint presentation as well as navigating it if needed.

Just Let It Play

By looping a PowerPoint presentation, you don’t have to lift a finger to advance through the slides. You can display it at a kiosk, in a waiting room, or at a convention booth and just let it play over and over.

For more, look at how to add narration for an engaging PowerPoint presentation .

Sandy Writtenhouse is a freelance technology writer and former Project, Department, and Program Manager. She turned her education, job experience, and love of technology into a full-time writing career. With all sorts of gadgets in her home and her hands, she seeks to help others make life easier through technology. Read Sandy's Full Bio

Read More Posts:

Leave a Reply

Your email address will not be published. Required fields are marked *

How to Loop a PowerPoint Presentation?

Table of Contents

PowerPoint presentations are a go-to for clear and informative content delivery. But what if you want your presentation to run on repeat, like at a kiosk or digital sign? The good news is, that PowerPoint has a built-in feature to loop your slideshow, ensuring your message stays on display without interruption. 

This blog post will guide you through the simple steps to set your presentation on a loop, keeping your audience engaged and informed around the clock.

What is PowerPoint Looping?

Normally, in a PowerPoint presentation, you have to manually move from one slide to the next by pressing keys on the keyboard or clicking buttons on a mouse or presentation remote.

However, when you enable looping in PowerPoint, the presentation progresses automatically from one slide to the next without requiring manual input. This eliminates the need for the presenter to interact with the computer or mouse during the presentation.

With PowerPoint looping, you can also set each slide to display automatically for a specified duration, determined by you. Once the preset time elapses, the next slide seamlessly appears. Additionally, upon reaching the final slide, the slideshow automatically starts over from the beginning.

Why Do You Need to Loop Your Slideshow in PowerPoint? 

There are several reasons why you might want to loop your slideshow in PowerPoint:

• Unattended Presentations: Looping is ideal for situations where the presentation runs without a presenter. This could be at a kiosk, trade show booth, or in a waiting room. Looping ensures the information is continuously displayed for viewers to come and go as they please.
• Automated Playback: Looping allows for a hands-off presentation experience. Once started, the presentation progresses automatically, freeing you up to greet attendees or answer questions.
• Self-Paced Learning: Looping can be useful for self-paced learning environments. Viewers can revisit slides or take breaks without needing someone to control the flow.
• Continuous Engagement: Looping keeps the audience engaged with a constant stream of information. This can be beneficial for displaying menus, directions, or other ongoing updates.

Create presentation slides with AI in Seconds in Google Slides

10M+ Installs

Works with Google Slides

How to Make a PowerPoint Presentation loop?

Ready to loop your presentation? Here’s how it’s done:

Step 1:  Open your PowerPoint and head over to the “Slide Show” tab.

Step 2:  Click the button that says “Set Up Slide Show.” A new window will pop up.

Step 3:  Under “Show options,” find the magic checkbox that says “Loop continuously until ‘Esc’.” Check that box to make your presentation run on repeat.

Step 4:  Want to control how long each slide shows? Look for the option “Automatically advance slides” and check it. Then, use the up and down arrows to set the display time for each slide.

Step 5:  Once you’re happy with the settings, click “OK” to save them.

Step 6: Time to loop! Go back to the “Slide Show” tab and click “From Beginning” (or “From Start”). Your presentation will start playing and keep going until you press the “Esc” key.

How To Loop a PowerPoint SlideShow from Selected Slides?

PowerPoint lets you loop a customized selection of slides, creating engaging presentations that run unattended. This eliminates the need for manual slide changes while maintaining audience interest. Here’s how to loop specific slides:

Step 1:  Select Slides: In the Slide Sorter view, hold “Shift” and click the first and last slides you want to loop.

Step 2:  Enable Looping: Go to the “Slide Show” tab and click “Set Up Show.” Check the box for “Loop continuously until ‘Esc'” and choose “Show slides” from the dropdown menu. Select “From” and enter the slide number where your loop should begin.

Step 3:  Create Custom Show (Optional): For easier access, name your looped sequence as a “Custom Show” within the “Set Up Show” dialog.

Step 4:  Start Looping: Navigate back to the “Slide Show” tab and choose “Custom Slide Show” to launch your looped presentation.

Closing Thoughts

Looping your PowerPoint presentation is a simple yet powerful technique that unlocks a variety of use cases. By following these steps, you can ensure your message runs continuously, keeping your audience informed and engaged, whether it’s at a kiosk, trade show booth, waiting room, or any other scenario that demands unattended playback. 

• No design skills required
• 3 presentations/month free
• Don’t need to learn a new software

Frequently Asked Questions

My presentation has animations and transitions. will they loop as well.

Absolutely! When you loop your presentation, animations and transitions will also repeat continuously, regardless of the looping method you choose.

Does looping affect animation timing?

There’s a possibility. Looping might affect how your animations play out, especially if they have specific timings set. To avoid any hiccups, be sure to thoroughly test your looped presentation. This will ensure your animations sync smoothly with the slide transitions.

Can I loop specific slides in my PowerPoint presentation?

Yes! PowerPoint gives you the flexibility to loop a selected group of slides, creating engaging presentations that run unattended.

How do I stop or pause a looped slideshow in PowerPoint?

Need a break? Simply press the “Esc” key on your keyboard to interrupt the looped slideshow at any time.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can! PowerPoint allows you to adjust the slide transition settings for each slide. This lets you control how long each slide displays, creating a tailored and dynamic looping experience.

Related Posts

How to Create Agenda Slide in Powerpoint?

Ever feel like your PowerPoint presentations could benefit from a strong start? Using an agenda slide at the beginning can be a helpful way to take charge of your presentation from the get-go.

How to End a PowerPoint Presentation?

Picture this: The lights dim, the room hushes, and your presentation is in full swing. But as you near the end, there’s a sense of anticipation, not boredom. Your audience leans in, hungry for that final spark to ignite their minds. That’s the power of a captivating conclusion. The secret sauce that leaves your audience […]

7X7 Rule in PPT (PowerPoint Presentation)

Captivate your audience with impactful presentations using the 7×7 rule. This design principle encourages a clear and focused approach by limiting slides to a mere 7 lines of text, each containing a maximum of 7 words. By adhering to this format, you can craft presentations that are not only easy to digest but also leave a lasting impression on your viewers. Let’s jump into the article and find out how it works.

Save Time and Effortlessly Create Presentations with SlidesAI

• M3 MacBook Air $300 Off!
• Shop Black Friday Tech Deals Central
• Software & Apps >
• MS Office >
• Powerpoint >

Loop a PowerPoint Slide Show

• Brock University

What to Know

• In PowerPoint, go to Slide Show > Set Up Slide Show > Browsed at a Kiosk (Full Screen ) > OK .
• Set the time each slide appears on the screen by selecting Slide Show > Rehearse Timings on the first slide.
• Use Next to move to the next slide and Pause to pause recording, or type a length of time in the Slide Time box.

This article explains how to loop a PowerPoint slideshow in PowerPoint 2019, PowerPoint 2016, PowerPoint 2013, PowerPoint 2010, PowerPoint for Microsoft 365, PowerPoint 2019 for Mac, PowerPoint 2016 for Mac, and PowerPoint for Mac 2011.

How to Create a Self-Running PowerPoint Slideshow

PowerPoint slideshows are not always used by a live presenter. Slideshows set to loop continuously can run unattended in a booth or kiosk. You can even save a slideshow as a video to share.

To create a continuously looping presentation, you need to set it up and record slide timings.

To run the slideshow unattended, set timings for slide transitions and animations to run automatically.

How to Set Up the Presentation

Open the PowerPoint presentation you want to loop continuously.

Go to Slide Show .

Select Set Up Slide Show . The Set Up Show dialog box opens.

Select Browsed at a Kiosk (Full Screen) . This enables the presentation to loop continuously until the viewer presses Esc .

Select OK .

How to Rehearse and Record Timings

To ensure that your automated presentation is the right length, record timings to set the amount of time each slide appears on the screen.

PowerPoint for Mac does not have the rehearsal option. Instead, go to Transitions , choose the transition you want to use, set the duration you want, and select Apply to All .

Go to the first slide of the presentation.

Select Rehearse Timings . The slideshow starts and records the time spent on the slide. The time appears in the Slide Time box on the Recording toolbar.

Select Next on the Recording toolbar when you want to move to the next slide.

Select Pause any time you want to pause or resume recording.

Type a length of time in the Slide Time box if you want to display a slide for a specific amount of time.

Select Repeat if you want to restart the recording time for the current slide only.

Select Close when you're done recording.

You'll be asked if you want to save the new slide timings. Select Yes to save the slide timings at the end of the presentation.

If you have a microphone (built-in or external), record a voiceover on your PowerPoint presentation that plays as the slideshow loops continuously.

Get the Latest Tech News Delivered Every Day

• 9 PowerPoint Presentation Tips for Students
• Control Placement in PowerPoint Slides by Nudging Objects
• Tips for Memorial PowerPoint Presentations
• Slide Layouts in PowerPoint
• Edit Music, Sound, or Other Audio Settings in PowerPoint
• How to Hide and Unhide a Slide in PowerPoint
• Play Sound and PowerPoint Animation at the Same Time
• How to Use Speaker Notes in PowerPoint
• How to Put a GIF in PowerPoint
• The 10 Most Common PowerPoint Terms
• How to Do a Voiceover on PowerPoint
• Copy Slides to Another PowerPoint Presentation
• How to Add Page Numbers in PowerPoint
• How to Add PowerPoint Slides Into a Word Document
• What Is Microsoft PowerPoint?
• Use This PowerPoint Template for a Multiple Choice Quiz

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Forums Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• Happiness Hub
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Computers and Electronics
• Presentation Software
• PowerPoint Presentations

How to Loop in PowerPoint on PC or Mac

Last Updated: November 24, 2021

This article was co-authored by wikiHow Staff . Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 23,874 times. Learn more...

Want to create a self-running PowerPoint presentation for your kiosk, trade-show, performance, or event? It's easy to adjust the options in PowerPoint to make your presentation play back in a continuous loop. When you turn on Slide Show Loop in PowerPoint, your presentation will start over again every time it ends, which means you won't need to be present to restart it. This wikiHow article will show you how to make your PowerPoint presentation loop indefinitely.

• If you haven't yet created your presentation, make one and save it as a file before proceeding.

• For example, to change the amount of time spent on each slide to 10 seconds, you would change the 00:00.00 text box to read 00:10.00 .

• Click File in the upper-left side of the window.
• Click Save As on the left side of the page.
• Double-click the This PC tab in the middle of the page.
• Click the "Save as type" drop-down box, then click PowerPoint Show in the drop-down menu.
• Enter a file name and select a save location.
• Click Save .

• If you're unhappy with a slide's display time, you can change the time by opening the presentation, going back to the Transitions tab, and adjusting the "After" text box.
• You can open a Show file in PowerPoint by dragging the Show file into the PowerPoint window.

• For example, to change the amount of time spent on each slide to 10 seconds, you would type 10.00 into the text box.

• Click File .
• Click Save As... .
• Click the "Format" drop-down box.
• Click PowerPoint Show (.ppsx) in the drop-down menu.

Expert Q&A

• If you use Microsoft Office 365, you can save your PowerPoint presentation as a video instead of a PowerPoint file and then loop the video using your computer's video player's "Loop" function. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ https://support.office.com/en-us/article/create-a-self-running-presentation-57fc41ae-f36a-4fb5-94a3-52d5bc466037#OfficeVersion=Mac
• ↑ https://support.office.com/en-us/article/file-formats-for-saving-and-exporting-presentations-in-powerpoint-for-mac-a4b76110-697c-496f-b9c5-e318f2bd6eba

About This Article

• Send fan mail to authors

Is this article up to date?

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help:

Tech troubles got you down? We've got the tips you need